| Message ID | 20210731173842.19643-10-digetx@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 | expand |
Hi, On Sat, Jul 31, 2021 at 08:38:39PM +0300, Dmitry Osipenko wrote: > SMB347 can supply power to USB VBUS, implement the USB VBUS regulator. > USB VBUS needs to be powered for switching OTG-cable USB port into host > mode. > > Signed-off-by: Dmitry Osipenko <digetx@gmail.com> > --- Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> -- Sebastian > drivers/power/supply/Kconfig | 1 + > drivers/power/supply/smb347-charger.c | 219 ++++++++++++++++++++++++++ > 2 files changed, 220 insertions(+) > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index 8543c89a0c1a..e83e9e4d512c 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -694,6 +694,7 @@ config CHARGER_BQ256XX > config CHARGER_SMB347 > tristate "Summit Microelectronics SMB3XX Battery Charger" > depends on I2C > + depends on REGULATOR > select REGMAP_I2C > help > Say Y to include support for Summit Microelectronics SMB345, > diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c > index 1c9205ca0993..753944e774c4 100644 > --- a/drivers/power/supply/smb347-charger.c > +++ b/drivers/power/supply/smb347-charger.c > @@ -18,6 +18,7 @@ > #include <linux/power_supply.h> > #include <linux/property.h> > #include <linux/regmap.h> > +#include <linux/regulator/driver.h> > > #include <dt-bindings/power/summit,smb347-charger.h> > > @@ -63,12 +64,15 @@ > #define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT 2 > #define CFG_THERM_MONITOR_DISABLED BIT(4) > #define CFG_SYSOK 0x08 > +#define CFG_SYSOK_INOK_ACTIVE_HIGH BIT(0) > #define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED BIT(2) > #define CFG_OTHER 0x09 > #define CFG_OTHER_RID_MASK 0xc0 > #define CFG_OTHER_RID_ENABLED_AUTO_OTG 0xc0 > #define CFG_OTG 0x0a > #define CFG_OTG_TEMP_THRESHOLD_MASK 0x30 > +#define CFG_OTG_CURRENT_LIMIT_250mA BIT(2) > +#define CFG_OTG_CURRENT_LIMIT_750mA BIT(3) > #define CFG_OTG_TEMP_THRESHOLD_SHIFT 4 > #define CFG_OTG_CC_COMPENSATION_MASK 0xc0 > #define CFG_OTG_CC_COMPENSATION_SHIFT 6 > @@ -92,6 +96,7 @@ > #define CMD_A 0x30 > #define CMD_A_CHG_ENABLED BIT(1) > #define CMD_A_SUSPEND_ENABLED BIT(2) > +#define CMD_A_OTG_ENABLED BIT(4) > #define CMD_A_ALLOW_WRITE BIT(7) > #define CMD_B 0x31 > #define CMD_C 0x33 > @@ -133,10 +138,12 @@ > * @regmap: pointer to driver regmap > * @mains: power_supply instance for AC/DC power > * @usb: power_supply instance for USB power > + * @usb_rdev: USB VBUS regulator device > * @id: SMB charger ID > * @mains_online: is AC/DC input connected > * @usb_online: is USB input connected > * @irq_unsupported: is interrupt unsupported by SMB hardware > + * @usb_vbus_enabled: is USB VBUS powered by SMB charger > * @max_charge_current: maximum current (in uA) the battery can be charged > * @max_charge_voltage: maximum voltage (in uV) the battery can be charged > * @pre_charge_current: current (in uA) to use in pre-charging phase > @@ -167,6 +174,8 @@ > * @use_usb_otg: USB OTG output can be used (not implemented yet) > * @enable_control: how charging enable/disable is controlled > * (driver/pin controls) > + * @inok_polarity: polarity of INOK signal which denotes presence of external > + * power supply > * > * @use_main, @use_usb, and @use_usb_otg are means to enable/disable > * hardware support for these. This is useful when we want to have for > @@ -189,10 +198,12 @@ struct smb347_charger { > struct regmap *regmap; > struct power_supply *mains; > struct power_supply *usb; > + struct regulator_dev *usb_rdev; > unsigned int id; > bool mains_online; > bool usb_online; > bool irq_unsupported; > + bool usb_vbus_enabled; > > unsigned int max_charge_current; > unsigned int max_charge_voltage; > @@ -213,6 +224,7 @@ struct smb347_charger { > bool use_usb; > bool use_usb_otg; > unsigned int enable_control; > + unsigned int inok_polarity; > }; > > enum smb_charger_chipid { > @@ -362,6 +374,11 @@ static int smb347_charging_set(struct smb347_charger *smb, bool enable) > return 0; > } > > + if (enable && smb->usb_vbus_enabled) { > + dev_dbg(smb->dev, "charging not enabled because USB is in host mode\n"); > + return 0; > + } > + > return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED, > enable ? CMD_A_CHG_ENABLED : 0); > } > @@ -1253,6 +1270,13 @@ static void smb347_dt_parse_dev_info(struct smb347_charger *smb) > /* Select charging control */ > device_property_read_u32(dev, "summit,enable-charge-control", > &smb->enable_control); > + > + /* > + * Polarity of INOK signal indicating presence of external power > + * supply connected to the charger. > + */ > + device_property_read_u32(dev, "summit,inok-polarity", > + &smb->inok_polarity); > } > > static int smb347_get_battery_info(struct smb347_charger *smb) > @@ -1304,6 +1328,160 @@ static int smb347_get_battery_info(struct smb347_charger *smb) > return 0; > } > > +static int smb347_usb_vbus_get_current_limit(struct regulator_dev *rdev) > +{ > + struct smb347_charger *smb = rdev_get_drvdata(rdev); > + unsigned int val; > + int ret; > + > + ret = regmap_read(smb->regmap, CFG_OTG, &val); > + if (ret < 0) > + return ret; > + > + /* > + * It's unknown what happens if this bit is unset due to lack of > + * access to the datasheet, assume it's limit-enable. > + */ > + if (!(val & CFG_OTG_CURRENT_LIMIT_250mA)) > + return 0; > + > + return val & CFG_OTG_CURRENT_LIMIT_750mA ? 750000 : 250000; > +} > + > +static int smb347_usb_vbus_set_new_current_limit(struct smb347_charger *smb, > + int max_uA) > +{ > + const unsigned int mask = CFG_OTG_CURRENT_LIMIT_750mA | > + CFG_OTG_CURRENT_LIMIT_250mA; > + unsigned int val = CFG_OTG_CURRENT_LIMIT_250mA; > + int ret; > + > + if (max_uA >= 750000) > + val |= CFG_OTG_CURRENT_LIMIT_750mA; > + > + ret = regmap_update_bits(smb->regmap, CFG_OTG, mask, val); > + if (ret < 0) > + dev_err(smb->dev, "failed to change USB current limit\n"); > + > + return ret; > +} > + > +static int smb347_usb_vbus_set_current_limit(struct regulator_dev *rdev, > + int min_uA, int max_uA) > +{ > + struct smb347_charger *smb = rdev_get_drvdata(rdev); > + int ret; > + > + ret = smb347_set_writable(smb, true, true); > + if (ret < 0) > + return ret; > + > + ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA); > + smb347_set_writable(smb, false, true); > + > + return ret; > +} > + > +static int smb347_usb_vbus_regulator_enable(struct regulator_dev *rdev) > +{ > + struct smb347_charger *smb = rdev_get_drvdata(rdev); > + int ret, max_uA; > + > + ret = smb347_set_writable(smb, true, true); > + if (ret < 0) > + return ret; > + > + smb347_charging_disable(smb); > + > + if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) { > + unsigned int sysok = 0; > + > + if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_LOW) > + sysok = CFG_SYSOK_INOK_ACTIVE_HIGH; > + > + /* > + * VBUS won't be powered if INOK is active, so we need to > + * manually disable INOK on some platforms. > + */ > + ret = regmap_update_bits(smb->regmap, CFG_SYSOK, > + CFG_SYSOK_INOK_ACTIVE_HIGH, sysok); > + if (ret < 0) { > + dev_err(smb->dev, "failed to disable INOK\n"); > + goto done; > + } > + } > + > + ret = smb347_usb_vbus_get_current_limit(rdev); > + if (ret < 0) { > + dev_err(smb->dev, "failed to get USB VBUS current limit\n"); > + goto done; > + } > + > + max_uA = ret; > + > + ret = smb347_usb_vbus_set_new_current_limit(smb, 250000); > + if (ret < 0) { > + dev_err(smb->dev, "failed to preset USB VBUS current limit\n"); > + goto done; > + } > + > + ret = regmap_set_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED); > + if (ret < 0) { > + dev_err(smb->dev, "failed to enable USB VBUS\n"); > + goto done; > + } > + > + smb->usb_vbus_enabled = true; > + > + ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA); > + if (ret < 0) { > + dev_err(smb->dev, "failed to restore USB VBUS current limit\n"); > + goto done; > + } > +done: > + smb347_set_writable(smb, false, true); > + > + return ret; > +} > + > +static int smb347_usb_vbus_regulator_disable(struct regulator_dev *rdev) > +{ > + struct smb347_charger *smb = rdev_get_drvdata(rdev); > + int ret; > + > + ret = smb347_set_writable(smb, true, true); > + if (ret < 0) > + return ret; > + > + ret = regmap_clear_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED); > + if (ret < 0) { > + dev_err(smb->dev, "failed to disable USB VBUS\n"); > + goto done; > + } > + > + smb->usb_vbus_enabled = false; > + > + if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) { > + unsigned int sysok = 0; > + > + if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_HIGH) > + sysok = CFG_SYSOK_INOK_ACTIVE_HIGH; > + > + ret = regmap_update_bits(smb->regmap, CFG_SYSOK, > + CFG_SYSOK_INOK_ACTIVE_HIGH, sysok); > + if (ret < 0) { > + dev_err(smb->dev, "failed to enable INOK\n"); > + goto done; > + } > + } > + > + smb347_start_stop_charging(smb); > +done: > + smb347_set_writable(smb, false, true); > + > + return ret; > +} > + > static const struct regmap_config smb347_regmap = { > .reg_bits = 8, > .val_bits = 8, > @@ -1314,6 +1492,14 @@ static const struct regmap_config smb347_regmap = { > .num_reg_defaults_raw = SMB347_MAX_REGISTER, > }; > > +static const struct regulator_ops smb347_usb_vbus_regulator_ops = { > + .is_enabled = regulator_is_enabled_regmap, > + .enable = smb347_usb_vbus_regulator_enable, > + .disable = smb347_usb_vbus_regulator_disable, > + .get_current_limit = smb347_usb_vbus_get_current_limit, > + .set_current_limit = smb347_usb_vbus_set_current_limit, > +}; > + > static const struct power_supply_desc smb347_mains_desc = { > .name = "smb347-mains", > .type = POWER_SUPPLY_TYPE_MAINS, > @@ -1330,10 +1516,24 @@ static const struct power_supply_desc smb347_usb_desc = { > .num_properties = ARRAY_SIZE(smb347_properties), > }; > > +static const struct regulator_desc smb347_usb_vbus_regulator_desc = { > + .name = "smb347-usb-vbus", > + .of_match = of_match_ptr("usb-vbus"), > + .ops = &smb347_usb_vbus_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .owner = THIS_MODULE, > + .enable_reg = CMD_A, > + .enable_mask = CMD_A_OTG_ENABLED, > + .enable_val = CMD_A_OTG_ENABLED, > + .fixed_uV = 5000000, > + .n_voltages = 1, > +}; > + > static int smb347_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > struct power_supply_config mains_usb_cfg = {}; > + struct regulator_config usb_rdev_cfg = {}; > struct device *dev = &client->dev; > struct smb347_charger *smb; > int ret; > @@ -1381,6 +1581,18 @@ static int smb347_probe(struct i2c_client *client, > if (ret) > return ret; > > + usb_rdev_cfg.dev = dev; > + usb_rdev_cfg.driver_data = smb; > + usb_rdev_cfg.regmap = smb->regmap; > + > + smb->usb_rdev = devm_regulator_register(dev, > + &smb347_usb_vbus_regulator_desc, > + &usb_rdev_cfg); > + if (IS_ERR(smb->usb_rdev)) { > + smb347_irq_disable(smb); > + return PTR_ERR(smb->usb_rdev); > + } > + > return 0; > } > > @@ -1388,11 +1600,17 @@ static int smb347_remove(struct i2c_client *client) > { > struct smb347_charger *smb = i2c_get_clientdata(client); > > + smb347_usb_vbus_regulator_disable(smb->usb_rdev); > smb347_irq_disable(smb); > > return 0; > } > > +static void smb347_shutdown(struct i2c_client *client) > +{ > + smb347_remove(client); > +} > + > static const struct i2c_device_id smb347_id[] = { > { "smb345", SMB345 }, > { "smb347", SMB347 }, > @@ -1416,6 +1634,7 @@ static struct i2c_driver smb347_driver = { > }, > .probe = smb347_probe, > .remove = smb347_remove, > + .shutdown = smb347_shutdown, > .id_table = smb347_id, > }; > module_i2c_driver(smb347_driver); > -- > 2.32.0 >
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 8543c89a0c1a..e83e9e4d512c 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -694,6 +694,7 @@ config CHARGER_BQ256XX config CHARGER_SMB347 tristate "Summit Microelectronics SMB3XX Battery Charger" depends on I2C + depends on REGULATOR select REGMAP_I2C help Say Y to include support for Summit Microelectronics SMB345, diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c index 1c9205ca0993..753944e774c4 100644 --- a/drivers/power/supply/smb347-charger.c +++ b/drivers/power/supply/smb347-charger.c @@ -18,6 +18,7 @@ #include <linux/power_supply.h> #include <linux/property.h> #include <linux/regmap.h> +#include <linux/regulator/driver.h> #include <dt-bindings/power/summit,smb347-charger.h> @@ -63,12 +64,15 @@ #define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT 2 #define CFG_THERM_MONITOR_DISABLED BIT(4) #define CFG_SYSOK 0x08 +#define CFG_SYSOK_INOK_ACTIVE_HIGH BIT(0) #define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED BIT(2) #define CFG_OTHER 0x09 #define CFG_OTHER_RID_MASK 0xc0 #define CFG_OTHER_RID_ENABLED_AUTO_OTG 0xc0 #define CFG_OTG 0x0a #define CFG_OTG_TEMP_THRESHOLD_MASK 0x30 +#define CFG_OTG_CURRENT_LIMIT_250mA BIT(2) +#define CFG_OTG_CURRENT_LIMIT_750mA BIT(3) #define CFG_OTG_TEMP_THRESHOLD_SHIFT 4 #define CFG_OTG_CC_COMPENSATION_MASK 0xc0 #define CFG_OTG_CC_COMPENSATION_SHIFT 6 @@ -92,6 +96,7 @@ #define CMD_A 0x30 #define CMD_A_CHG_ENABLED BIT(1) #define CMD_A_SUSPEND_ENABLED BIT(2) +#define CMD_A_OTG_ENABLED BIT(4) #define CMD_A_ALLOW_WRITE BIT(7) #define CMD_B 0x31 #define CMD_C 0x33 @@ -133,10 +138,12 @@ * @regmap: pointer to driver regmap * @mains: power_supply instance for AC/DC power * @usb: power_supply instance for USB power + * @usb_rdev: USB VBUS regulator device * @id: SMB charger ID * @mains_online: is AC/DC input connected * @usb_online: is USB input connected * @irq_unsupported: is interrupt unsupported by SMB hardware + * @usb_vbus_enabled: is USB VBUS powered by SMB charger * @max_charge_current: maximum current (in uA) the battery can be charged * @max_charge_voltage: maximum voltage (in uV) the battery can be charged * @pre_charge_current: current (in uA) to use in pre-charging phase @@ -167,6 +174,8 @@ * @use_usb_otg: USB OTG output can be used (not implemented yet) * @enable_control: how charging enable/disable is controlled * (driver/pin controls) + * @inok_polarity: polarity of INOK signal which denotes presence of external + * power supply * * @use_main, @use_usb, and @use_usb_otg are means to enable/disable * hardware support for these. This is useful when we want to have for @@ -189,10 +198,12 @@ struct smb347_charger { struct regmap *regmap; struct power_supply *mains; struct power_supply *usb; + struct regulator_dev *usb_rdev; unsigned int id; bool mains_online; bool usb_online; bool irq_unsupported; + bool usb_vbus_enabled; unsigned int max_charge_current; unsigned int max_charge_voltage; @@ -213,6 +224,7 @@ struct smb347_charger { bool use_usb; bool use_usb_otg; unsigned int enable_control; + unsigned int inok_polarity; }; enum smb_charger_chipid { @@ -362,6 +374,11 @@ static int smb347_charging_set(struct smb347_charger *smb, bool enable) return 0; } + if (enable && smb->usb_vbus_enabled) { + dev_dbg(smb->dev, "charging not enabled because USB is in host mode\n"); + return 0; + } + return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED, enable ? CMD_A_CHG_ENABLED : 0); } @@ -1253,6 +1270,13 @@ static void smb347_dt_parse_dev_info(struct smb347_charger *smb) /* Select charging control */ device_property_read_u32(dev, "summit,enable-charge-control", &smb->enable_control); + + /* + * Polarity of INOK signal indicating presence of external power + * supply connected to the charger. + */ + device_property_read_u32(dev, "summit,inok-polarity", + &smb->inok_polarity); } static int smb347_get_battery_info(struct smb347_charger *smb) @@ -1304,6 +1328,160 @@ static int smb347_get_battery_info(struct smb347_charger *smb) return 0; } +static int smb347_usb_vbus_get_current_limit(struct regulator_dev *rdev) +{ + struct smb347_charger *smb = rdev_get_drvdata(rdev); + unsigned int val; + int ret; + + ret = regmap_read(smb->regmap, CFG_OTG, &val); + if (ret < 0) + return ret; + + /* + * It's unknown what happens if this bit is unset due to lack of + * access to the datasheet, assume it's limit-enable. + */ + if (!(val & CFG_OTG_CURRENT_LIMIT_250mA)) + return 0; + + return val & CFG_OTG_CURRENT_LIMIT_750mA ? 750000 : 250000; +} + +static int smb347_usb_vbus_set_new_current_limit(struct smb347_charger *smb, + int max_uA) +{ + const unsigned int mask = CFG_OTG_CURRENT_LIMIT_750mA | + CFG_OTG_CURRENT_LIMIT_250mA; + unsigned int val = CFG_OTG_CURRENT_LIMIT_250mA; + int ret; + + if (max_uA >= 750000) + val |= CFG_OTG_CURRENT_LIMIT_750mA; + + ret = regmap_update_bits(smb->regmap, CFG_OTG, mask, val); + if (ret < 0) + dev_err(smb->dev, "failed to change USB current limit\n"); + + return ret; +} + +static int smb347_usb_vbus_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct smb347_charger *smb = rdev_get_drvdata(rdev); + int ret; + + ret = smb347_set_writable(smb, true, true); + if (ret < 0) + return ret; + + ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA); + smb347_set_writable(smb, false, true); + + return ret; +} + +static int smb347_usb_vbus_regulator_enable(struct regulator_dev *rdev) +{ + struct smb347_charger *smb = rdev_get_drvdata(rdev); + int ret, max_uA; + + ret = smb347_set_writable(smb, true, true); + if (ret < 0) + return ret; + + smb347_charging_disable(smb); + + if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) { + unsigned int sysok = 0; + + if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_LOW) + sysok = CFG_SYSOK_INOK_ACTIVE_HIGH; + + /* + * VBUS won't be powered if INOK is active, so we need to + * manually disable INOK on some platforms. + */ + ret = regmap_update_bits(smb->regmap, CFG_SYSOK, + CFG_SYSOK_INOK_ACTIVE_HIGH, sysok); + if (ret < 0) { + dev_err(smb->dev, "failed to disable INOK\n"); + goto done; + } + } + + ret = smb347_usb_vbus_get_current_limit(rdev); + if (ret < 0) { + dev_err(smb->dev, "failed to get USB VBUS current limit\n"); + goto done; + } + + max_uA = ret; + + ret = smb347_usb_vbus_set_new_current_limit(smb, 250000); + if (ret < 0) { + dev_err(smb->dev, "failed to preset USB VBUS current limit\n"); + goto done; + } + + ret = regmap_set_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED); + if (ret < 0) { + dev_err(smb->dev, "failed to enable USB VBUS\n"); + goto done; + } + + smb->usb_vbus_enabled = true; + + ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA); + if (ret < 0) { + dev_err(smb->dev, "failed to restore USB VBUS current limit\n"); + goto done; + } +done: + smb347_set_writable(smb, false, true); + + return ret; +} + +static int smb347_usb_vbus_regulator_disable(struct regulator_dev *rdev) +{ + struct smb347_charger *smb = rdev_get_drvdata(rdev); + int ret; + + ret = smb347_set_writable(smb, true, true); + if (ret < 0) + return ret; + + ret = regmap_clear_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED); + if (ret < 0) { + dev_err(smb->dev, "failed to disable USB VBUS\n"); + goto done; + } + + smb->usb_vbus_enabled = false; + + if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) { + unsigned int sysok = 0; + + if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_HIGH) + sysok = CFG_SYSOK_INOK_ACTIVE_HIGH; + + ret = regmap_update_bits(smb->regmap, CFG_SYSOK, + CFG_SYSOK_INOK_ACTIVE_HIGH, sysok); + if (ret < 0) { + dev_err(smb->dev, "failed to enable INOK\n"); + goto done; + } + } + + smb347_start_stop_charging(smb); +done: + smb347_set_writable(smb, false, true); + + return ret; +} + static const struct regmap_config smb347_regmap = { .reg_bits = 8, .val_bits = 8, @@ -1314,6 +1492,14 @@ static const struct regmap_config smb347_regmap = { .num_reg_defaults_raw = SMB347_MAX_REGISTER, }; +static const struct regulator_ops smb347_usb_vbus_regulator_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = smb347_usb_vbus_regulator_enable, + .disable = smb347_usb_vbus_regulator_disable, + .get_current_limit = smb347_usb_vbus_get_current_limit, + .set_current_limit = smb347_usb_vbus_set_current_limit, +}; + static const struct power_supply_desc smb347_mains_desc = { .name = "smb347-mains", .type = POWER_SUPPLY_TYPE_MAINS, @@ -1330,10 +1516,24 @@ static const struct power_supply_desc smb347_usb_desc = { .num_properties = ARRAY_SIZE(smb347_properties), }; +static const struct regulator_desc smb347_usb_vbus_regulator_desc = { + .name = "smb347-usb-vbus", + .of_match = of_match_ptr("usb-vbus"), + .ops = &smb347_usb_vbus_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_reg = CMD_A, + .enable_mask = CMD_A_OTG_ENABLED, + .enable_val = CMD_A_OTG_ENABLED, + .fixed_uV = 5000000, + .n_voltages = 1, +}; + static int smb347_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct power_supply_config mains_usb_cfg = {}; + struct regulator_config usb_rdev_cfg = {}; struct device *dev = &client->dev; struct smb347_charger *smb; int ret; @@ -1381,6 +1581,18 @@ static int smb347_probe(struct i2c_client *client, if (ret) return ret; + usb_rdev_cfg.dev = dev; + usb_rdev_cfg.driver_data = smb; + usb_rdev_cfg.regmap = smb->regmap; + + smb->usb_rdev = devm_regulator_register(dev, + &smb347_usb_vbus_regulator_desc, + &usb_rdev_cfg); + if (IS_ERR(smb->usb_rdev)) { + smb347_irq_disable(smb); + return PTR_ERR(smb->usb_rdev); + } + return 0; } @@ -1388,11 +1600,17 @@ static int smb347_remove(struct i2c_client *client) { struct smb347_charger *smb = i2c_get_clientdata(client); + smb347_usb_vbus_regulator_disable(smb->usb_rdev); smb347_irq_disable(smb); return 0; } +static void smb347_shutdown(struct i2c_client *client) +{ + smb347_remove(client); +} + static const struct i2c_device_id smb347_id[] = { { "smb345", SMB345 }, { "smb347", SMB347 }, @@ -1416,6 +1634,7 @@ static struct i2c_driver smb347_driver = { }, .probe = smb347_probe, .remove = smb347_remove, + .shutdown = smb347_shutdown, .id_table = smb347_id, }; module_i2c_driver(smb347_driver);
SMB347 can supply power to USB VBUS, implement the USB VBUS regulator. USB VBUS needs to be powered for switching OTG-cable USB port into host mode. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/power/supply/Kconfig | 1 + drivers/power/supply/smb347-charger.c | 219 ++++++++++++++++++++++++++ 2 files changed, 220 insertions(+)