@@ -135,7 +135,6 @@
* @id: SMB charger ID
* @mains_online: is AC/DC input connected
* @usb_online: is USB input connected
- * @charging_enabled: is charging enabled
* @irq_unsupported: is interrupt unsupported by SMB hardware
* @max_charge_current: maximum current (in uA) the battery can be charged
* @max_charge_voltage: maximum voltage (in uV) the battery can be charged
@@ -192,7 +191,6 @@ struct smb347_charger {
unsigned int id;
bool mains_online;
bool usb_online;
- bool charging_enabled;
bool irq_unsupported;
unsigned int max_charge_current;
@@ -358,21 +356,13 @@ static int smb347_charging_status(struct smb347_charger *smb)
static int smb347_charging_set(struct smb347_charger *smb, bool enable)
{
- int ret = 0;
-
if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
return 0;
}
- if (smb->charging_enabled != enable) {
- ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
- enable ? CMD_A_CHG_ENABLED : 0);
- if (!ret)
- smb->charging_enabled = enable;
- }
-
- return ret;
+ return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
+ enable ? CMD_A_CHG_ENABLED : 0);
}
static inline int smb347_charging_enable(struct smb347_charger *smb)
@@ -1310,6 +1300,8 @@ static const struct regmap_config smb347_regmap = {
.max_register = SMB347_MAX_REGISTER,
.volatile_reg = smb347_volatile_reg,
.readable_reg = smb347_readable_reg,
+ .cache_type = REGCACHE_FLAT,
+ .num_reg_defaults_raw = SMB347_MAX_REGISTER,
};
static const struct power_supply_desc smb347_mains_desc = {
Utilize generic regmap caching in order to avoid unnecessary slow I2C accesses to all constant registers each time the supply status updated and remove local caching of charger state to make code cleaner. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/power/supply/smb347-charger.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-)