@@ -272,3 +272,19 @@ config ARM_PXA2xx_CPUFREQ
This add the CPUFreq driver support for Intel PXA2xx SOCs.
If in doubt, say N.
+
+config ACPI_CPPC_CPUFREQ
+ tristate "CPUFreq driver based on the ACPI CPPC spec"
+ depends on ACPI_CPPC
+ default n
+ help
+ This adds a CPUFreq driver which uses CPPC methods
+ as described in the ACPIv5.1 spec. CPPC stands for
+ Collaborative Processor Performance Controls. It
+ is based on an abstract continuous scale of CPU
+ performance values which allows the remote power
+ processor to flexibly optimize for power and
+ performance. CPPC relies on power management firmware
+ for its operation.
+
+ If in doubt, say N.
@@ -79,6 +79,8 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
+obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
+
##################################################################################
# PowerPC platform drivers
new file mode 100644
@@ -0,0 +1,197 @@
+/*
+ * CPPC (Collaborative Processor Performance Control) driver for
+ * interfacing with the CPUfreq layer and governors. See
+ * cppc_acpi.c for CPPC specific methods.
+ *
+ * (C) Copyright 2014 Linaro Ltd.
+ * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#define pr_fmt(fmt) "CPPC Cpufreq:" fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/vmalloc.h>
+
+#include <acpi/cppc_acpi.h>
+
+static struct cpudata **all_cpu_data;
+
+static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpudata *cpu;
+ struct cpufreq_freqs freqs;
+ int ret;
+
+ cpu = all_cpu_data[policy->cpu];
+
+ cpu->perf_ctrls.desired_perf = target_freq;
+ freqs.old = policy->cur;
+ freqs.new = target_freq;
+
+ cpufreq_freq_transition_begin(policy, &freqs);
+ ret = cppc_set_perf(cpu->cpu, &cpu->perf_ctrls);
+ cpufreq_freq_transition_end(policy, &freqs, ret != 0);
+
+ if (ret) {
+ pr_debug("Failed to set target on CPU:%d. ret:%d\n",
+ cpu->cpu, ret);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned int cppc_cpufreq_get_perf(unsigned int cpu_num)
+{
+ struct cpudata *cpu;
+ int32_t delivered_perf = 1;
+ int ret;
+
+ cpu = all_cpu_data[cpu_num];
+ if (!cpu)
+ return 0;
+
+ ret = cppc_get_perf_ctrs(cpu_num, &cpu->perf_fb_ctrs);
+
+ if (ret) {
+ pr_err("Err reading CPU%d, perf counters. ret:%d\n",
+ cpu->cpu, ret);
+ return -ENODEV;
+ }
+ delivered_perf = cpu->perf_caps.reference_perf *
+ cpu->perf_fb_ctrs.delivered;
+ delivered_perf /= cpu->perf_fb_ctrs.reference;
+ pr_debug("delivered_perf: %d\n", delivered_perf);
+ pr_debug("reference_perf: %d\n",
+ cpu->perf_caps.reference_perf);
+ pr_debug("delivered, reference deltas: %lld, %lld\n",
+ cpu->perf_fb_ctrs.delivered,
+ cpu->perf_fb_ctrs.reference);
+
+ return delivered_perf;
+}
+
+static int cppc_verify_policy(struct cpufreq_policy *policy)
+{
+ cpufreq_verify_within_cpu_limits(policy);
+ return 0;
+}
+
+static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy)
+{
+ int cpu_num = policy->cpu;
+ struct cpudata *cpu = all_cpu_data[cpu_num];
+ int ret;
+
+ pr_info("CPU %d exiting\n", cpu_num);
+
+ cpu->perf_ctrls.desired_perf = cpu->perf_caps.lowest_perf;
+
+ ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
+ if (ret)
+ pr_err("Err setting perf value:%d on CPU:%d. ret:%d\n",
+ cpu->perf_caps.lowest_perf, cpu_num, ret);
+}
+
+static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ struct cpudata *cpu;
+ int ret;
+
+ cpu = all_cpu_data[policy->cpu];
+
+ cpu->cpu = policy->cpu;
+ ret = cppc_get_perf_caps(policy->cpu, &cpu->perf_caps);
+
+ if (ret) {
+ pr_err("Err reading CPU%d, perf capabilities. ret:%d\n",
+ cpu->cpu, ret);
+ return -ENODEV;
+ }
+
+ policy->min = cpu->perf_caps.lowest_perf;
+ policy->max = cpu->perf_caps.highest_perf;
+ /* cpuinfo and default policy values */
+ policy->cpuinfo.min_freq = cpu->perf_caps.lowest_perf;
+ policy->cpuinfo.max_freq = cpu->perf_caps.highest_perf;
+
+ if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
+ policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+ cpumask_copy(policy->cpus, cpu->shared_cpu_map);
+
+ cpumask_set_cpu(policy->cpu, policy->cpus);
+ cpu->cur_policy = policy;
+
+ pr_info("Initialized on cpu:%d\n", cpu->cpu);
+ return 0;
+}
+
+static struct cpufreq_driver cppc_cpufreq_driver = {
+ .flags = CPUFREQ_CONST_LOOPS,
+ .verify = cppc_verify_policy,
+ .target = cppc_cpufreq_set_target,
+ .get = cppc_cpufreq_get_perf,
+ .init = cppc_cpufreq_cpu_init,
+ .stop_cpu = cppc_cpufreq_stop_cpu,
+ .name = "cppc_cpufreq",
+};
+
+static int __init cppc_cpufreq_init(void)
+{
+ int i, rc = 0;
+ struct cpudata *cpu;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus());
+ if (!all_cpu_data)
+ return -ENOMEM;
+
+ for_each_possible_cpu(i) {
+ all_cpu_data[i] = kzalloc(sizeof(struct cpudata), GFP_KERNEL);
+ if (!all_cpu_data[i])
+ goto out;
+
+ cpu = all_cpu_data[i];
+ if (!zalloc_cpumask_var(&cpu->shared_cpu_map,
+ GFP_KERNEL)) {
+ pr_debug("No memory for shared_cpus cpumask\n");
+ goto out;
+ }
+ }
+
+ rc = acpi_get_psd_map(all_cpu_data);
+ if (rc) {
+ pr_err("Error parsing PSD data\n");
+ goto out;
+ }
+
+ rc = cpufreq_register_driver(&cppc_cpufreq_driver);
+ if (rc)
+ goto out;
+
+ pr_info("Registration completed\n");
+ return rc;
+
+out:
+ for_each_possible_cpu(i)
+ if (all_cpu_data[i])
+ kfree(all_cpu_data[i]);
+
+ vfree(all_cpu_data);
+ return -ENODEV;
+}
+
+late_initcall(cppc_cpufreq_init);
This driver utilizes the methods introduced in the previous patch - "ACPI: Introduce CPU performance controls using CPPC" and enables usage with existing CPUFreq governors. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> --- drivers/cpufreq/Kconfig.arm | 16 ++++ drivers/cpufreq/Makefile | 2 + drivers/cpufreq/cppc_cpufreq.c | 197 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 215 insertions(+) create mode 100644 drivers/cpufreq/cppc_cpufreq.c