wireless: rtl8187: replace udev with usb_get_dev()

Replace udev with usb_get_dev() in order to make code cleaner.

Signed-off-by: Salah Triki <salah.triki@gmail.com>
---
 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

On Sat, Jul 24, 2021 at 08:54:34PM +0000, Hin-Tak Leung wrote:
>  
> 
> On Saturday, 24 July 2021, 19:35:12 BST, Salah Triki <salah.triki@gmail.com> wrote:
> 
> 
> > Replace udev with usb_get_dev() in order to make code cleaner.
> 
> > Signed-off-by: Salah Triki <salah.triki@gmail.com>
> > ---
> > drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 4 +---
> > 1 file changed, 1 insertion(+), 3 deletions(-)
> 
> > diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
> > index eb68b2d3caa1..30bb3c2b8407 100644
> > --- a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
> > +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
> > @@ -1455,9 +1455,7 @@ static int rtl8187_probe(struct usb_interface *intf,
> 
> >     SET_IEEE80211_DEV(dev, &intf->dev);
> >     usb_set_intfdata(intf, dev);
> > -    priv->udev = udev;
> > -
> > -    usb_get_dev(udev);
> > +    priv->udev = usb_get_dev(udev);
> 
> >     skb_queue_head_init(&priv->rx_queue);
> 
> > -- 
> > 2.25.1
> 
> It is not cleaner - the change is not functionally equivalent. Before the change, the reference count is increased after the assignment; and after the change, before the assignment. So my question is, does the reference count increasing a little earlier matters? What can go wrong between very short time where the reference count increases, and priv->udev not yet assigned? I think there might be a race condition where the probbe function is called very shortly twice.
> Especially if the time of running the reference count function is non-trivial.

Probe functions are called in order, this should not be an issue.

This patch changes nothing, I do not think it is needed at all.

thanks,

greg k-h

On 7/24/21 3:54 PM, Hin-Tak Leung wrote:
> 
> 
> On Saturday, 24 July 2021, 19:35:12 BST, Salah Triki <salah.triki@gmail.com> wrote:
> 
> 
>  > Replace udev with usb_get_dev() in order to make code cleaner.
> 
>  > Signed-off-by: Salah Triki <salah.triki@gmail.com>
>  > ---
>  > drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 4 +---
>  > 1 file changed, 1 insertion(+), 3 deletions(-)
> 
>  > diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c 
> b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
>  > index eb68b2d3caa1..30bb3c2b8407 100644
>  > --- a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
>  > +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
>  > @@ -1455,9 +1455,7 @@ static int rtl8187_probe(struct usb_interface *intf,
> 
>  >     SET_IEEE80211_DEV(dev, &intf->dev);
>  >     usb_set_intfdata(intf, dev);
>  > -    priv->udev = udev;
>  > -
>  > -    usb_get_dev(udev);
>  > +    priv->udev = usb_get_dev(udev);
> 
>  >     skb_queue_head_init(&priv->rx_queue);
> 
>  > --
>  > 2.25.1
> 
> It is not cleaner - the change is not functionally equivalent. Before the 
> change, the reference count is increased after the assignment; and after the 
> change, before the assignment. So my question is, does the reference count 
> increasing a little earlier matters? What can go wrong between very short time 
> where the reference count increases, and priv->udev not yet assigned? I think 
> there might be a race condition where the probbe function is called very shortly 
> twice.
> Especially if the time of running the reference count function is non-trivial.
> 
> Larry, what do you think?

My belief was that probe routines were called in order, which was confirmed by 
GregKH. As a result, there can be no race condition, and the order of setting 
the reference count does not matter. On the other hand, the current code is not 
misleading, nor unclear. Why should it be changed?

NACK on the patch.

Larry

Hin-Tak Leung <htl10@users.sourceforge.net> writes:

> On Saturday, 24 July 2021, 19:35:12 BST, Salah Triki <salah.triki@gmail.com> wrote:

>

>> Replace udev with usb_get_dev() in order to make code cleaner.

>

>> Signed-off-by: Salah Triki <salah.triki@gmail.com>

>> ---

>> drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 4 +---

>> 1 file changed, 1 insertion(+), 3 deletions(-)

>

>> diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c

> b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c

>> index eb68b2d3caa1..30bb3c2b8407 100644

>> --- a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c

>> +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c

>> @@ -1455,9 +1455,7 @@ static int rtl8187_probe(struct usb_interface *intf,

>

>>     SET_IEEE80211_DEV(dev, &intf->dev);

>>     usb_set_intfdata(intf, dev);

>> -    priv->udev = udev;

>> -

>> -    usb_get_dev(udev);

>> +    priv->udev = usb_get_dev(udev);

>

>>     skb_queue_head_init(&priv->rx_queue);

>

>> -- 

>> 2.25.1

>

> It is not cleaner - the change is not functionally equivalent. Before

> the change, the reference count is increased after the assignment; and

> after the change, before the assignment. So my question is, does the

> reference count increasing a little earlier matters? What can go wrong

> between very short time where the reference count increases, and

> priv->udev not yet assigned? I think there might be a race condition

> where the probbe function is called very shortly twice. Especially if

> the time of running the reference count function is non-trivial.

>

> Larry, what do you think? 


BTW, please don't use HTML in emails. Our lists drop all HTML mail (and
for a good reason).

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches