@@ -61,6 +61,7 @@
* rate for most user case.
*/
#define ASPEED_ADC_DEF_SAMPLING_RATE 65000
+#define ASPEED_ADC_MAX_RAW_DATA GENMASK(9, 0)
enum aspeed_adc_version {
aspeed_adc_ast2400,
@@ -84,6 +85,7 @@ struct aspeed_adc_data {
struct reset_control *rst;
int vref;
u32 sample_period_ns;
+ int cv;
};
#define ASPEED_CHAN(_idx, _data_reg_addr) { \
@@ -115,6 +117,48 @@ static const struct iio_chan_spec aspeed_adc_iio_channels[] = {
ASPEED_CHAN(15, 0x2E),
};
+static int aspeed_adc_compensation(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct aspeed_adc_data *data = iio_priv(indio_dev);
+ u32 index, adc_raw = 0;
+ u32 adc_engine_control_reg_val =
+ readl(data->base + ASPEED_REG_ENGINE_CONTROL);
+ adc_engine_control_reg_val |=
+ (ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE);
+
+ /*
+ * Enable compensating sensing:
+ * After that, the input voltage of adc will force to half of the reference
+ * voltage. So the expected reading raw data will become half of the max
+ * value. We can get compensating value = 0x200 - adc read raw value.
+ * It is recommended to average at least 10 samples to get a final CV.
+ */
+ writel(adc_engine_control_reg_val | ASPEED_ADC_CTRL_COMPENSATION |
+ ASPEED_ADC_CTRL_CHANNEL_ENABLE(0),
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+ /*
+ * After enable compensating sensing mode need to wait some time for adc stable
+ * Experiment result is 1ms.
+ */
+ mdelay(1);
+
+ for (index = 0; index < 16; index++) {
+ /*
+ * Waiting for the sampling period ensures that the value acquired
+ * is fresh each time.
+ */
+ ndelay(data->sample_period_ns);
+ adc_raw += readw(data->base + aspeed_adc_iio_channels[0].address);
+ }
+ adc_raw >>= 4;
+ data->cv = BIT(ASPEED_RESOLUTION_BITS - 1) - adc_raw;
+ writel(adc_engine_control_reg_val,
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+ dev_dbg(data->dev, "compensating value = %d\n", data->cv);
+ return 0;
+}
+
static int aspeed_adc_set_sampling_rate(struct iio_dev *indio_dev, u32 rate)
{
struct aspeed_adc_data *data = iio_priv(indio_dev);
@@ -143,7 +187,11 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
- *val = readw(data->base + chan->address);
+ *val = readw(data->base + chan->address) + data->cv;
+ if (*val < 0)
+ *val = 0;
+ else if (*val >= ASPEED_ADC_MAX_RAW_DATA)
+ *val = ASPEED_ADC_MAX_RAW_DATA;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
@@ -347,7 +395,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
if (ret)
goto poll_timeout_error;
}
-
+ aspeed_adc_compensation(pdev);
adc_engine_control_reg_val =
readl(data->base + ASPEED_REG_ENGINE_CONTROL);
/* Start all channels in normal mode. */
This patch adds a compensation phase to improve the accurate of adc measurement. This is the builtin function though input half of the reference voltage to get the adc offset. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/iio/adc/aspeed_adc.c | 52 ++++++++++++++++++++++++++++++++++-- 1 file changed, 50 insertions(+), 2 deletions(-)