diff mbox series

Expose Peak USB device id in sysfs via phys_port_name.

Message ID 20210721124048.590426-1-nautsch2@gmail.com
State New
Headers show
Series Expose Peak USB device id in sysfs via phys_port_name. | expand

Commit Message

Andre Naujoks July 21, 2021, 12:40 p.m. UTC 
The Peak USB CAN adapters can be assigned a device id via the Peak
provided tools (pcan-settings). This id can currently not be set by the
upstream kernel drivers, but some devices expose this id already.

The id can be used for consistent naming of CAN interfaces regardless of
order of attachment or recognition on the system. The classical CAN Peak
USB adapters expose this id via bcdDevice (combined with another value)
on USB-level in the sysfs tree and this value is then available in
ID_REVISION from udev. This is not a feasible approach, when a single
USB device offers more than one CAN-interface, like e.g. the PCAN-USB
Pro FD devices.

This patch exposes those ids via the, up to now unused, netdevice sysfs
attribute phys_port_name as a simple decimal ASCII representation of the
id. phys_port_id was not used, since the default print functions from
net/core/net-sysfs.c output a hex-encoded binary value, which is
overkill for a one-byte device id, like this one.
---
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index e8f43ed90b72..f6cbb01a58cc 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -408,6 +408,21 @@  static netdev_tx_t peak_usb_ndo_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 }
 
+static int peak_usb_ndo_get_phys_port_name(struct net_device *netdev,
+					   char *name, size_t len)
+{
+	const struct peak_usb_device *dev = netdev_priv(netdev);
+	int err;
+
+	err = snprintf(name, len, "%u", dev->device_number);
+
+	if (err >= len || err <= 0) {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /*
  * start the CAN interface.
  * Rx and Tx urbs are allocated here. Rx urbs are submitted here.
@@ -769,6 +784,7 @@  static const struct net_device_ops peak_usb_netdev_ops = {
 	.ndo_stop = peak_usb_ndo_stop,
 	.ndo_start_xmit = peak_usb_ndo_start_xmit,
 	.ndo_change_mtu = can_change_mtu,
+	.ndo_get_phys_port_name = peak_usb_ndo_get_phys_port_name,
 };
 
 /*