diff mbox

[v2,06/12] watchdog: bindings: Supply knowledge of a third supported device - clocksource

Message ID 1431435500-22899-7-git-send-email-lee.jones@linaro.org
State Accepted
Commit 82c32c0326dc758bdf202c82cb05594ba0dd0d2e
Headers show

Commit Message

Lee Jones May 12, 2015, 12:58 p.m. UTC
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
index 388c88a..039c5ca 100644
--- a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
@@ -1,9 +1,11 @@ 
 STMicroelectronics Low Power Controller (LPC) - Watchdog
 ========================================================
 
-LPC currently supports Watchdog OR Real Time Clock functionality.
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
 
 [See: ../rtc/rtc-st-lpc.txt for RTC options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
 
 Required properties
 
@@ -12,9 +14,11 @@  Required properties
 - reg		: LPC registers base address + size
 - interrupts    : LPC interrupt line number and associated flags
 - clocks	: Clock used by LPC device (See: ../clock/clock-bindings.txt)
-- st,lpc-mode	: The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
-		  ST_LPC_MODE_WDT [1].  One (and only one) mode must be
-		  selected.
+- st,lpc-mode	: The LPC can run either one of three modes:
+                  ST_LPC_MODE_RTC    [0]
+                  ST_LPC_MODE_WDT    [1]
+                  ST_LPC_MODE_CLKSRC [2]
+		 One (and only one) mode must be selected.
 
 Required properties [watchdog mode]