@@ -3536,6 +3536,46 @@ static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
.pwrdn_delay_max = 1005, /* us */
};
+static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .tx_tbl = qmp_v4_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
+ .usb_cfg = &sm8150_usb3phy_cfg,
+ .dp_cfg = &sc8180x_dpphy_cfg,
+};
+
static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -5377,6 +5417,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sc8180x-qmp-usb3-phy",
.data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ /* It's a combo phy */
}, {
.compatible = "qcom,sdm845-qhp-pcie-phy",
.data = &sdm845_qhp_pciephy_cfg,
@@ -5454,6 +5497,10 @@ static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
.data = &sm8250_usb3dpphy_cfg,
},
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
{ }
};
The two USB QMPs are USB/DP compbo PHYs, add the compatible for this combination to allow DP output. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) -- 2.29.2