diff mbox series

dt-bindings: mtd: spi-nand: Convert to DT schema format

Message ID 20210718004125.733-1-a-nandan@ti.com
State New
Headers show
Series dt-bindings: mtd: spi-nand: Convert to DT schema format | expand

Commit Message

Apurva Nandan July 18, 2021, 12:41 a.m. UTC
Convert spi-nand.txt binding to YAML format with an added example.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 .../devicetree/bindings/mtd/spi-nand.txt      |  5 --
 .../devicetree/bindings/mtd/spi-nand.yaml     | 74 +++++++++++++++++++
 2 files changed, 74 insertions(+), 5 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.yaml

Comments

Rob Herring (Arm) July 19, 2021, 1:47 p.m. UTC | #1
On Sun, 18 Jul 2021 00:41:25 +0000, Apurva Nandan wrote:
> Convert spi-nand.txt binding to YAML format with an added example.

> 

> Signed-off-by: Apurva Nandan <a-nandan@ti.com>

> ---

>  .../devicetree/bindings/mtd/spi-nand.txt      |  5 --

>  .../devicetree/bindings/mtd/spi-nand.yaml     | 74 +++++++++++++++++++

>  2 files changed, 74 insertions(+), 5 deletions(-)

>  delete mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt

>  create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.yaml

> 


My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.example.dt.yaml: spi-flash@1: $nodename:0: 'spi-flash@1' does not match '^flash(@.*)?$'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/spi-nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.example.dt.yaml: spi-flash@1: 'rx-sample-delay-ns' does not match any of the regexes: '^otp(-[0-9]+)?$', '^partition@', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/spi-nand.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1506558

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) July 19, 2021, 3:24 p.m. UTC | #2
On Sun, Jul 18, 2021 at 12:41:25AM +0000, Apurva Nandan wrote:
> Convert spi-nand.txt binding to YAML format with an added example.
> 
> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
> ---
>  .../devicetree/bindings/mtd/spi-nand.txt      |  5 --
>  .../devicetree/bindings/mtd/spi-nand.yaml     | 74 +++++++++++++++++++
>  2 files changed, 74 insertions(+), 5 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
>  create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
> deleted file mode 100644
> index 8b51f3b6d55c..000000000000
> --- a/Documentation/devicetree/bindings/mtd/spi-nand.txt
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -SPI NAND flash
> -
> -Required properties:
> -- compatible: should be "spi-nand"
> -- reg: should encode the chip-select line used to access the NAND chip
> diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.yaml b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
> new file mode 100644
> index 000000000000..366b86e1b19c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SPI NAND flash
> +
> +maintainers:
> +  - Apurva Nandan <a-nandan@ti.com>
> +
> +allOf:
> +  - $ref: "mtd.yaml#"
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: spi-nand

Drop 'oneOf' as there is only one.

> +
> +  reg:
> +    items:
> +      description:
> +        should encode the chip-select line used to access the NAND chip

Just:

reg:
  maxItems: 1

> +
> +  spi-max-frequency: true
> +  spi-rx-bus-width: true
> +  spi-tx-bus-width: true
> +
> +  partitions:
> +    type: object
> +
> +  '#address-cells': true
> +  '#size-cells': true
> +
> +patternProperties:
> +  # Note: use 'partitions' node for new users
> +  '^partition@':
> +    type: object
> +
> +  "^otp(-[0-9]+)?$":
> +    type: object
> +
> +additionalProperties: false

Just do:

additionalProperties:
  type: object

and then drop partitions, partition@, and ^otp(-[0-9]+)?$.

> +
> +examples:
> +  - |
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        flash@6 {
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            compatible = "spi-nand";
> +            reg = <0x6>;
> +            spi-max-frequency = <42000000>;
> +
> +            partitions {
> +                compatible = "fixed-partitions";
> +                #address-cells = <1>;
> +                #size-cells = <1>;
> +
> +                partition@0 {
> +                    label = "boot";
> +                    reg = <0 0x200000>;
> +                };
> +
> +                partition@200000 {
> +                    label = "rootfs";
> +                    reg = <0x200000 0xce0000>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.17.1
> 
>
Apurva Nandan July 20, 2021, 2:13 p.m. UTC | #3
On 19-Jul-21 7:17 PM, Rob Herring wrote:
> On Sun, 18 Jul 2021 00:41:25 +0000, Apurva Nandan wrote:
>> Convert spi-nand.txt binding to YAML format with an added example.
>>
>> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
>> ---
>>  .../devicetree/bindings/mtd/spi-nand.txt      |  5 --
>>  .../devicetree/bindings/mtd/spi-nand.yaml     | 74 +++++++++++++++++++
>>  2 files changed, 74 insertions(+), 5 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
>>  create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.yaml
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.example.dt.yaml: spi-flash@1: $nodename:0: 'spi-flash@1' does not match '^flash(@.*)?$'

I propose to change the nodename in snps,dw-apb-ssi.yaml from
'spi-flash@1' to 'flash@1', making it similar to the convention followed
by jedec,spi-nor.yaml. Currently, there is no user of snps,dw-apb-ssi
with a spi-nand as child node, so let's make the node name uniform
across different types of flashes i.e. 'flash@*'. What do you suggest?

> 	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/spi-nand.yaml
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.example.dt.yaml: spi-flash@1: 'rx-sample-delay-ns' does not match any of the regexes: '^otp(-[0-9]+)?$', '^partition@', 'pinctrl-[0-9]+'
> 	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/spi-nand.yaml
> \ndoc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/patch/1506558
> 
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
> 

Yes, yamllint was not installed. I will correct them and send as v2.

Thanks,
Apurva Nandan
Apurva Nandan July 20, 2021, 2:15 p.m. UTC | #4
On 19-Jul-21 8:54 PM, Rob Herring wrote:
> On Sun, Jul 18, 2021 at 12:41:25AM +0000, Apurva Nandan wrote:
>> Convert spi-nand.txt binding to YAML format with an added example.
>>
>> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
>> ---
>>  .../devicetree/bindings/mtd/spi-nand.txt      |  5 --
>>  .../devicetree/bindings/mtd/spi-nand.yaml     | 74 +++++++++++++++++++
>>  2 files changed, 74 insertions(+), 5 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
>>  create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
>> deleted file mode 100644
>> index 8b51f3b6d55c..000000000000
>> --- a/Documentation/devicetree/bindings/mtd/spi-nand.txt
>> +++ /dev/null
>> @@ -1,5 +0,0 @@
>> -SPI NAND flash
>> -
>> -Required properties:
>> -- compatible: should be "spi-nand"
>> -- reg: should encode the chip-select line used to access the NAND chip
>> diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.yaml b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
>> new file mode 100644
>> index 000000000000..366b86e1b19c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
>> @@ -0,0 +1,74 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: SPI NAND flash
>> +
>> +maintainers:
>> +  - Apurva Nandan <a-nandan@ti.com>
>> +
>> +allOf:
>> +  - $ref: "mtd.yaml#"
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - const: spi-nand
> 
> Drop 'oneOf' as there is only one.
> 
>> +
>> +  reg:
>> +    items:
>> +      description:
>> +        should encode the chip-select line used to access the NAND chip
> 
> Just:
> 
> reg:
>   maxItems: 1
> 
>> +
>> +  spi-max-frequency: true
>> +  spi-rx-bus-width: true
>> +  spi-tx-bus-width: true
>> +
>> +  partitions:
>> +    type: object
>> +
>> +  '#address-cells': true
>> +  '#size-cells': true
>> +
>> +patternProperties:
>> +  # Note: use 'partitions' node for new users
>> +  '^partition@':
>> +    type: object
>> +
>> +  "^otp(-[0-9]+)?$":
>> +    type: object
>> +
>> +additionalProperties: false
> 
> Just do:
> 
> additionalProperties:
>   type: object
> 
> and then drop partitions, partition@, and ^otp(-[0-9]+)?$.
> 
>> +
>> +examples:
>> +  - |
>> +    spi {
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        flash@6 {
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>> +            compatible = "spi-nand";
>> +            reg = <0x6>;
>> +            spi-max-frequency = <42000000>;
>> +
>> +            partitions {
>> +                compatible = "fixed-partitions";
>> +                #address-cells = <1>;
>> +                #size-cells = <1>;
>> +
>> +                partition@0 {
>> +                    label = "boot";
>> +                    reg = <0 0x200000>;
>> +                };
>> +
>> +                partition@200000 {
>> +                    label = "rootfs";
>> +                    reg = <0x200000 0xce0000>;
>> +                };
>> +            };
>> +        };
>> +    };
>> -- 
>> 2.17.1
>>
>>

Agree with all the suggestions made, will correct and send v2.

Thanks,
Apurva Nandan
kernel test robot July 21, 2021, 10:17 a.m. UTC | #5
Hi Apurva,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on mtd/mtd/next]
[also build test WARNING on mtd/mtd/fixes robh/for-next v5.14-rc2 next-20210720]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Apurva-Nandan/dt-bindings-mtd-spi-nand-Convert-to-DT-schema-format/20210718-103130
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next
compiler: arm-linux-gnueabi-gcc (GCC) 10.3.0
reproduce: make ARCH=arm dtbs_check

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


dtcheck warnings: (new ones prefixed by >>)
   	From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml: clock-controller@1800000: '#power-domain-cells' is a required property
   	From schema: Documentation/devicetree/bindings/clock/qcom,gcc.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/rng@22000: failed to match any schema with compatible: ['qcom,prng']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/pinctrl@1000000: failed to match any schema with compatible: ['qcom,ipq4019-pinctrl']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml: usb-power: $nodename:0: 'usb-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
   	From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/gpio/gpio-hog.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/sdhci@7824900: failed to match any schema with compatible: ['qcom,sdhci-msm-v4']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/dma@7884000: failed to match any schema with compatible: ['qcom,bam-v1.7.0']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/spi@78b5000: failed to match any schema with compatible: ['qcom,spi-qup-v2.2.1']
>> arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml: nand@1: $nodename:0: 'nand@1' does not match '^flash(@.*)?$'
   	From schema: Documentation/devicetree/bindings/mtd/spi-nand.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/spi@78b6000: failed to match any schema with compatible: ['qcom,spi-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/i2c@78b7000: failed to match any schema with compatible: ['qcom,i2c-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/i2c@78b8000: failed to match any schema with compatible: ['qcom,i2c-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/dma@8e04000: failed to match any schema with compatible: ['qcom,bam-v1.7.0']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/crypto@8e3a000: failed to match any schema with compatible: ['qcom,crypto-v5.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/clock-controller@b088000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/clock-controller@b098000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/clock-controller@b0a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dt.yaml:0:0: /soc/clock-controller@b0b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
--
   	From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml: clock-controller@1800000: '#power-domain-cells' is a required property
   	From schema: Documentation/devicetree/bindings/clock/qcom,gcc.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/rng@22000: failed to match any schema with compatible: ['qcom,prng']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/pinctrl@1000000: failed to match any schema with compatible: ['qcom,ipq4019-pinctrl']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml: usb-power: $nodename:0: 'usb-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
   	From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/gpio/gpio-hog.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/sdhci@7824900: failed to match any schema with compatible: ['qcom,sdhci-msm-v4']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/dma@7884000: failed to match any schema with compatible: ['qcom,bam-v1.7.0']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/spi@78b5000: failed to match any schema with compatible: ['qcom,spi-qup-v2.2.1']
>> arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml: nand@1: $nodename:0: 'nand@1' does not match '^flash(@.*)?$'
   	From schema: Documentation/devicetree/bindings/mtd/spi-nand.yaml
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/spi@78b6000: failed to match any schema with compatible: ['qcom,spi-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/i2c@78b7000: failed to match any schema with compatible: ['qcom,i2c-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/i2c@78b8000: failed to match any schema with compatible: ['qcom,i2c-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/dma@8e04000: failed to match any schema with compatible: ['qcom,bam-v1.7.0']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/crypto@8e3a000: failed to match any schema with compatible: ['qcom,crypto-v5.1']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/clock-controller@b088000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/clock-controller@b098000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/clock-controller@b0a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dt.yaml:0:0: /soc/clock-controller@b0b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
--
   	From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/reg.yaml
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml: soc: pci@40000000:reg:0: [1073741824, 3869, 1073745696, 168, 524288, 8192, 1074790400, 4096] is too long
   	From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml: clock-controller@1800000: '#power-domain-cells' is a required property
   	From schema: Documentation/devicetree/bindings/clock/qcom,gcc.yaml
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/rng@22000: failed to match any schema with compatible: ['qcom,prng']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/pinctrl@1000000: failed to match any schema with compatible: ['qcom,ipq4019-pinctrl']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/sdhci@7824900: failed to match any schema with compatible: ['qcom,sdhci-msm-v4']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/dma@7884000: failed to match any schema with compatible: ['qcom,bam-v1.7.0']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/spi@78b5000: failed to match any schema with compatible: ['qcom,spi-qup-v2.2.1']
>> arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml: spi-nand@1: $nodename:0: 'spi-nand@1' does not match '^flash(@.*)?$'
   	From schema: Documentation/devicetree/bindings/mtd/spi-nand.yaml
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/spi@78b6000: failed to match any schema with compatible: ['qcom,spi-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/i2c@78b7000: failed to match any schema with compatible: ['qcom,i2c-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/i2c@78b8000: failed to match any schema with compatible: ['qcom,i2c-qup-v2.2.1']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/dma@8e04000: failed to match any schema with compatible: ['qcom,bam-v1.7.0']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/crypto@8e3a000: failed to match any schema with compatible: ['qcom,crypto-v5.1']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/clock-controller@b088000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/clock-controller@b098000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/clock-controller@b0a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
   arch/arm/boot/dts/qcom-ipq4018-jalapeno.dt.yaml:0:0: /soc/clock-controller@b0b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
deleted file mode 100644
index 8b51f3b6d55c..000000000000
--- a/Documentation/devicetree/bindings/mtd/spi-nand.txt
+++ /dev/null
@@ -1,5 +0,0 @@ 
-SPI NAND flash
-
-Required properties:
-- compatible: should be "spi-nand"
-- reg: should encode the chip-select line used to access the NAND chip
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.yaml b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
new file mode 100644
index 000000000000..366b86e1b19c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
@@ -0,0 +1,74 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI NAND flash
+
+maintainers:
+  - Apurva Nandan <a-nandan@ti.com>
+
+allOf:
+  - $ref: "mtd.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: spi-nand
+
+  reg:
+    items:
+      description:
+        should encode the chip-select line used to access the NAND chip
+
+  spi-max-frequency: true
+  spi-rx-bus-width: true
+  spi-tx-bus-width: true
+
+  partitions:
+    type: object
+
+  '#address-cells': true
+  '#size-cells': true
+
+patternProperties:
+  # Note: use 'partitions' node for new users
+  '^partition@':
+    type: object
+
+  "^otp(-[0-9]+)?$":
+    type: object
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@6 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            compatible = "spi-nand";
+            reg = <0x6>;
+            spi-max-frequency = <42000000>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "boot";
+                    reg = <0 0x200000>;
+                };
+
+                partition@200000 {
+                    label = "rootfs";
+                    reg = <0x200000 0xce0000>;
+                };
+            };
+        };
+    };