@@ -790,6 +790,8 @@ config CHARGER_WILCO
config RN5T618_POWER
tristate "RN5T618 charger/fuel gauge support"
depends on MFD_RN5T618
+ depends on RN5T618_ADC
+ depends on IIO
help
Say Y here to have support for RN5T618 PMIC family fuel gauge and charger.
This driver can also be built as a module. If so, the module will be
@@ -9,10 +9,12 @@
#include <linux/device.h>
#include <linux/bitops.h>
#include <linux/errno.h>
+#include <linux/iio/consumer.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/mfd/rn5t618.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
@@ -64,6 +66,8 @@ struct rn5t618_power_info {
struct power_supply *battery;
struct power_supply *usb;
struct power_supply *adp;
+ struct iio_channel *channel_vusb;
+ struct iio_channel *channel_vadp;
int irq;
};
@@ -77,6 +81,7 @@ static enum power_supply_usb_type rn5t618_usb_types[] = {
static enum power_supply_property rn5t618_usb_props[] = {
/* input current limit is not very accurate */
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_USB_TYPE,
POWER_SUPPLY_PROP_ONLINE,
@@ -85,6 +90,7 @@ static enum power_supply_property rn5t618_usb_props[] = {
static enum power_supply_property rn5t618_adp_props[] = {
/* input current limit is not very accurate */
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_ONLINE,
};
@@ -463,6 +469,15 @@ static int rn5t618_adp_get_property(struct power_supply *psy,
return ret;
val->intval = FROM_CUR_REG(regval);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (!info->channel_vadp)
+ return -ENODATA;
+
+ ret = iio_read_channel_processed_scale(info->channel_vadp, &val->intval, 1000);
+ if (ret < 0)
+ return ret;
+
break;
default:
return -EINVAL;
@@ -588,6 +603,15 @@ static int rn5t618_usb_get_property(struct power_supply *psy,
val->intval = FROM_CUR_REG(regval);
}
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (!info->channel_vusb)
+ return -ENODATA;
+
+ ret = iio_read_channel_processed_scale(info->channel_vusb, &val->intval, 1000);
+ if (ret < 0)
+ return ret;
+
break;
default:
return -EINVAL;
@@ -711,6 +735,20 @@ static int rn5t618_power_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, info);
+ info->channel_vusb = devm_iio_channel_get(&pdev->dev, "vusb");
+ if (IS_ERR(info->channel_vusb)) {
+ if (PTR_ERR(info->channel_vusb) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(info->channel_vusb);
+ }
+
+ info->channel_vadp = devm_iio_channel_get(&pdev->dev, "vadp");
+ if (IS_ERR(info->channel_vadp)) {
+ if (PTR_ERR(info->channel_vadp) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(info->channel_vadp);
+ }
+
ret = regmap_read(info->rn5t618->regmap, RN5T618_CONTROL, &v);
if (ret)
return ret;