diff mbox series

[v2,2/3] hw: aspeed_gpio: Simplify 1.8V defines

Message ID 20210713065854.134634-3-joel@jms.id.au
State Superseded
Headers show
Series hw: aspeed_gpio: MMIO region fix and cleanups | expand

Commit Message

Joel Stanley July 13, 2021, 6:58 a.m. UTC 
There's no need to define the registers relative to the 0x800 offset
where the controller is mapped, as the device is instantiated as it's
own model at the correct memory address.

Simplify the defines and remove the offset to save future confusion.

Signed-off-by: Joel Stanley <joel@jms.id.au>

---
 hw/gpio/aspeed_gpio.c | 73 +++++++++++++++++++++----------------------
 1 file changed, 36 insertions(+), 37 deletions(-)

-- 
2.32.0

Comments

Rashmica Gupta July 13, 2021, 7:46 a.m. UTC | #1 
On Tue, 2021-07-13 at 16:28 +0930, Joel Stanley wrote:
> There's no need to define the registers relative to the 0x800 offset

> where the controller is mapped, as the device is instantiated as it's

> own model at the correct memory address.

> 

> Simplify the defines and remove the offset to save future confusion.

> 

> Signed-off-by: Joel Stanley <joel@jms.id.au>


Makes sense, and it is cleaner.
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>

> ---

>  hw/gpio/aspeed_gpio.c | 73 +++++++++++++++++++++--------------------

> --

>  1 file changed, 36 insertions(+), 37 deletions(-)

> 

> diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c

> index b3dec4448009..dc721aec5da7 100644

> --- a/hw/gpio/aspeed_gpio.c

> +++ b/hw/gpio/aspeed_gpio.c

> @@ -169,44 +169,43 @@

>  

>  /* AST2600 only - 1.8V gpios */

>  /*

> - * The AST2600 has same 3.6V gpios as the AST2400 (memory offsets

> 0x0-0x198)

> - * and additional 1.8V gpios (memory offsets 0x800-0x9D4).

> + * The AST2600 two copies of the GPIO controller: the same 3.6V

> gpios as the

> + * AST2400 (memory offsets 0x0-0x198) and a second controller with

> 1.8V gpios

> + * (memory offsets 0x800-0x9D4).

>   */

> -#define GPIO_1_8V_REG_OFFSET          0x800

> -#define GPIO_1_8V_ABCD_DATA_VALUE     ((0x800 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DIRECTION      ((0x804 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_ENABLE     ((0x808 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_SENS_0     ((0x80C -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_SENS_1     ((0x810 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_SENS_2     ((0x814 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_STATUS     ((0x818 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DATA_VALUE        ((0x820 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DIRECTION         ((0x824 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_ENABLE        ((0x828 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_SENS_0        ((0x82C -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_SENS_1        ((0x830 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_SENS_2        ((0x834 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_STATUS        ((0x838 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_RESET_TOLERANT    ((0x83C -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DEBOUNCE_1     ((0x840 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DEBOUNCE_2     ((0x844 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DEBOUNCE_1        ((0x848 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DEBOUNCE_2        ((0x84C -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_DEBOUNCE_TIME_1     ((0x850 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_DEBOUNCE_TIME_2     ((0x854 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_DEBOUNCE_TIME_3     ((0x858 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_COMMAND_SRC_0  ((0x860 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_COMMAND_SRC_1  ((0x864 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_COMMAND_SRC_0     ((0x868 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_COMMAND_SRC_1     ((0x86C -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DATA_READ      ((0x8C0 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DATA_READ         ((0x8C4 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INPUT_MASK     ((0x9D0 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INPUT_MASK        ((0x9D4 -

> GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_MEM_SIZE            0x9D8

> -#define GPIO_1_8V_REG_ARRAY_SIZE      ((GPIO_1_8V_MEM_SIZE - \

> -                                      GPIO_1_8V_REG_OFFSET) >> 2)

> +#define GPIO_1_8V_ABCD_DATA_VALUE     (0x000 >> 2)

> +#define GPIO_1_8V_ABCD_DIRECTION      (0x004 >> 2)

> +#define GPIO_1_8V_ABCD_INT_ENABLE     (0x008 >> 2)

> +#define GPIO_1_8V_ABCD_INT_SENS_0     (0x00C >> 2)

> +#define GPIO_1_8V_ABCD_INT_SENS_1     (0x010 >> 2)

> +#define GPIO_1_8V_ABCD_INT_SENS_2     (0x014 >> 2)

> +#define GPIO_1_8V_ABCD_INT_STATUS     (0x018 >> 2)

> +#define GPIO_1_8V_ABCD_RESET_TOLERANT (0x01C >> 2)

> +#define GPIO_1_8V_E_DATA_VALUE        (0x020 >> 2)

> +#define GPIO_1_8V_E_DIRECTION         (0x024 >> 2)

> +#define GPIO_1_8V_E_INT_ENABLE        (0x028 >> 2)

> +#define GPIO_1_8V_E_INT_SENS_0        (0x02C >> 2)

> +#define GPIO_1_8V_E_INT_SENS_1        (0x030 >> 2)

> +#define GPIO_1_8V_E_INT_SENS_2        (0x034 >> 2)

> +#define GPIO_1_8V_E_INT_STATUS        (0x038 >> 2)

> +#define GPIO_1_8V_E_RESET_TOLERANT    (0x03C >> 2)

> +#define GPIO_1_8V_ABCD_DEBOUNCE_1     (0x040 >> 2)

> +#define GPIO_1_8V_ABCD_DEBOUNCE_2     (0x044 >> 2)

> +#define GPIO_1_8V_E_DEBOUNCE_1        (0x048 >> 2)

> +#define GPIO_1_8V_E_DEBOUNCE_2        (0x04C >> 2)

> +#define GPIO_1_8V_DEBOUNCE_TIME_1     (0x050 >> 2)

> +#define GPIO_1_8V_DEBOUNCE_TIME_2     (0x054 >> 2)

> +#define GPIO_1_8V_DEBOUNCE_TIME_3     (0x058 >> 2)

> +#define GPIO_1_8V_ABCD_COMMAND_SRC_0  (0x060 >> 2)

> +#define GPIO_1_8V_ABCD_COMMAND_SRC_1  (0x064 >> 2)

> +#define GPIO_1_8V_E_COMMAND_SRC_0     (0x068 >> 2)

> +#define GPIO_1_8V_E_COMMAND_SRC_1     (0x06C >> 2)

> +#define GPIO_1_8V_ABCD_DATA_READ      (0x0C0 >> 2)

> +#define GPIO_1_8V_E_DATA_READ         (0x0C4 >> 2)

> +#define GPIO_1_8V_ABCD_INPUT_MASK     (0x1D0 >> 2)

> +#define GPIO_1_8V_E_INPUT_MASK        (0x1D4 >> 2)

> +#define GPIO_1_8V_MEM_SIZE            0x1D8

> +#define GPIO_1_8V_REG_ARRAY_SIZE      (GPIO_1_8V_MEM_SIZE >> 2)

>  

>  static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high,

> int gpio)

>  {
Cédric Le Goater July 19, 2021, 4:02 p.m. UTC | #2 
On 7/13/21 8:58 AM, Joel Stanley wrote:
> There's no need to define the registers relative to the 0x800 offset

> where the controller is mapped, as the device is instantiated as it's

> own model at the correct memory address.

> 

> Simplify the defines and remove the offset to save future confusion.

> 

> Signed-off-by: Joel Stanley <joel@jms.id.au>


Reviewed-by: Cédric Le Goater <clg@kaod.org>


> ---

>  hw/gpio/aspeed_gpio.c | 73 +++++++++++++++++++++----------------------

>  1 file changed, 36 insertions(+), 37 deletions(-)

> 

> diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c

> index b3dec4448009..dc721aec5da7 100644

> --- a/hw/gpio/aspeed_gpio.c

> +++ b/hw/gpio/aspeed_gpio.c

> @@ -169,44 +169,43 @@

>  

>  /* AST2600 only - 1.8V gpios */

>  /*

> - * The AST2600 has same 3.6V gpios as the AST2400 (memory offsets 0x0-0x198)

> - * and additional 1.8V gpios (memory offsets 0x800-0x9D4).

> + * The AST2600 two copies of the GPIO controller: the same 3.6V gpios as the

> + * AST2400 (memory offsets 0x0-0x198) and a second controller with 1.8V gpios

> + * (memory offsets 0x800-0x9D4).

>   */

> -#define GPIO_1_8V_REG_OFFSET          0x800

> -#define GPIO_1_8V_ABCD_DATA_VALUE     ((0x800 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DIRECTION      ((0x804 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_ENABLE     ((0x808 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_SENS_0     ((0x80C - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_SENS_1     ((0x810 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_SENS_2     ((0x814 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INT_STATUS     ((0x818 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DATA_VALUE        ((0x820 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DIRECTION         ((0x824 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_ENABLE        ((0x828 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_SENS_0        ((0x82C - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_SENS_1        ((0x830 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_SENS_2        ((0x834 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INT_STATUS        ((0x838 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_RESET_TOLERANT    ((0x83C - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DEBOUNCE_1     ((0x840 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DEBOUNCE_2     ((0x844 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DEBOUNCE_1        ((0x848 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DEBOUNCE_2        ((0x84C - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_DEBOUNCE_TIME_1     ((0x850 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_DEBOUNCE_TIME_2     ((0x854 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_DEBOUNCE_TIME_3     ((0x858 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_COMMAND_SRC_0  ((0x860 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_COMMAND_SRC_1  ((0x864 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_COMMAND_SRC_0     ((0x868 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_COMMAND_SRC_1     ((0x86C - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_DATA_READ      ((0x8C0 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_DATA_READ         ((0x8C4 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_ABCD_INPUT_MASK     ((0x9D0 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_E_INPUT_MASK        ((0x9D4 - GPIO_1_8V_REG_OFFSET) >> 2)

> -#define GPIO_1_8V_MEM_SIZE            0x9D8

> -#define GPIO_1_8V_REG_ARRAY_SIZE      ((GPIO_1_8V_MEM_SIZE - \

> -                                      GPIO_1_8V_REG_OFFSET) >> 2)

> +#define GPIO_1_8V_ABCD_DATA_VALUE     (0x000 >> 2)

> +#define GPIO_1_8V_ABCD_DIRECTION      (0x004 >> 2)

> +#define GPIO_1_8V_ABCD_INT_ENABLE     (0x008 >> 2)

> +#define GPIO_1_8V_ABCD_INT_SENS_0     (0x00C >> 2)

> +#define GPIO_1_8V_ABCD_INT_SENS_1     (0x010 >> 2)

> +#define GPIO_1_8V_ABCD_INT_SENS_2     (0x014 >> 2)

> +#define GPIO_1_8V_ABCD_INT_STATUS     (0x018 >> 2)

> +#define GPIO_1_8V_ABCD_RESET_TOLERANT (0x01C >> 2)

> +#define GPIO_1_8V_E_DATA_VALUE        (0x020 >> 2)

> +#define GPIO_1_8V_E_DIRECTION         (0x024 >> 2)

> +#define GPIO_1_8V_E_INT_ENABLE        (0x028 >> 2)

> +#define GPIO_1_8V_E_INT_SENS_0        (0x02C >> 2)

> +#define GPIO_1_8V_E_INT_SENS_1        (0x030 >> 2)

> +#define GPIO_1_8V_E_INT_SENS_2        (0x034 >> 2)

> +#define GPIO_1_8V_E_INT_STATUS        (0x038 >> 2)

> +#define GPIO_1_8V_E_RESET_TOLERANT    (0x03C >> 2)

> +#define GPIO_1_8V_ABCD_DEBOUNCE_1     (0x040 >> 2)

> +#define GPIO_1_8V_ABCD_DEBOUNCE_2     (0x044 >> 2)

> +#define GPIO_1_8V_E_DEBOUNCE_1        (0x048 >> 2)

> +#define GPIO_1_8V_E_DEBOUNCE_2        (0x04C >> 2)

> +#define GPIO_1_8V_DEBOUNCE_TIME_1     (0x050 >> 2)

> +#define GPIO_1_8V_DEBOUNCE_TIME_2     (0x054 >> 2)

> +#define GPIO_1_8V_DEBOUNCE_TIME_3     (0x058 >> 2)

> +#define GPIO_1_8V_ABCD_COMMAND_SRC_0  (0x060 >> 2)

> +#define GPIO_1_8V_ABCD_COMMAND_SRC_1  (0x064 >> 2)

> +#define GPIO_1_8V_E_COMMAND_SRC_0     (0x068 >> 2)

> +#define GPIO_1_8V_E_COMMAND_SRC_1     (0x06C >> 2)

> +#define GPIO_1_8V_ABCD_DATA_READ      (0x0C0 >> 2)

> +#define GPIO_1_8V_E_DATA_READ         (0x0C4 >> 2)

> +#define GPIO_1_8V_ABCD_INPUT_MASK     (0x1D0 >> 2)

> +#define GPIO_1_8V_E_INPUT_MASK        (0x1D4 >> 2)

> +#define GPIO_1_8V_MEM_SIZE            0x1D8

> +#define GPIO_1_8V_REG_ARRAY_SIZE      (GPIO_1_8V_MEM_SIZE >> 2)

>  

>  static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio)

>  {

>
Philippe Mathieu-Daudé July 19, 2021, 10:05 p.m. UTC | #3 
On 7/13/21 8:58 AM, Joel Stanley wrote:
> There's no need to define the registers relative to the 0x800 offset

> where the controller is mapped, as the device is instantiated as it's

> own model at the correct memory address.

> 

> Simplify the defines and remove the offset to save future confusion.

> 

> Signed-off-by: Joel Stanley <joel@jms.id.au>

> ---

>  hw/gpio/aspeed_gpio.c | 73 +++++++++++++++++++++----------------------

>  1 file changed, 36 insertions(+), 37 deletions(-)


Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
diff mbox series

Patch

diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c
index b3dec4448009..dc721aec5da7 100644
--- a/hw/gpio/aspeed_gpio.c
+++ b/hw/gpio/aspeed_gpio.c
@@ -169,44 +169,43 @@ 
 
 /* AST2600 only - 1.8V gpios */
 /*
- * The AST2600 has same 3.6V gpios as the AST2400 (memory offsets 0x0-0x198)
- * and additional 1.8V gpios (memory offsets 0x800-0x9D4).
+ * The AST2600 two copies of the GPIO controller: the same 3.6V gpios as the
+ * AST2400 (memory offsets 0x0-0x198) and a second controller with 1.8V gpios
+ * (memory offsets 0x800-0x9D4).
  */
-#define GPIO_1_8V_REG_OFFSET          0x800
-#define GPIO_1_8V_ABCD_DATA_VALUE     ((0x800 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_DIRECTION      ((0x804 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_INT_ENABLE     ((0x808 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_INT_SENS_0     ((0x80C - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_INT_SENS_1     ((0x810 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_INT_SENS_2     ((0x814 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_INT_STATUS     ((0x818 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_DATA_VALUE        ((0x820 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_DIRECTION         ((0x824 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_INT_ENABLE        ((0x828 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_INT_SENS_0        ((0x82C - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_INT_SENS_1        ((0x830 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_INT_SENS_2        ((0x834 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_INT_STATUS        ((0x838 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_RESET_TOLERANT    ((0x83C - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_DEBOUNCE_1     ((0x840 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_DEBOUNCE_2     ((0x844 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_DEBOUNCE_1        ((0x848 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_DEBOUNCE_2        ((0x84C - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_DEBOUNCE_TIME_1     ((0x850 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_DEBOUNCE_TIME_2     ((0x854 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_DEBOUNCE_TIME_3     ((0x858 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_COMMAND_SRC_0  ((0x860 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_COMMAND_SRC_1  ((0x864 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_COMMAND_SRC_0     ((0x868 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_COMMAND_SRC_1     ((0x86C - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_DATA_READ      ((0x8C0 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_DATA_READ         ((0x8C4 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_ABCD_INPUT_MASK     ((0x9D0 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_E_INPUT_MASK        ((0x9D4 - GPIO_1_8V_REG_OFFSET) >> 2)
-#define GPIO_1_8V_MEM_SIZE            0x9D8
-#define GPIO_1_8V_REG_ARRAY_SIZE      ((GPIO_1_8V_MEM_SIZE - \
-                                      GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DATA_VALUE     (0x000 >> 2)
+#define GPIO_1_8V_ABCD_DIRECTION      (0x004 >> 2)
+#define GPIO_1_8V_ABCD_INT_ENABLE     (0x008 >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_0     (0x00C >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_1     (0x010 >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_2     (0x014 >> 2)
+#define GPIO_1_8V_ABCD_INT_STATUS     (0x018 >> 2)
+#define GPIO_1_8V_ABCD_RESET_TOLERANT (0x01C >> 2)
+#define GPIO_1_8V_E_DATA_VALUE        (0x020 >> 2)
+#define GPIO_1_8V_E_DIRECTION         (0x024 >> 2)
+#define GPIO_1_8V_E_INT_ENABLE        (0x028 >> 2)
+#define GPIO_1_8V_E_INT_SENS_0        (0x02C >> 2)
+#define GPIO_1_8V_E_INT_SENS_1        (0x030 >> 2)
+#define GPIO_1_8V_E_INT_SENS_2        (0x034 >> 2)
+#define GPIO_1_8V_E_INT_STATUS        (0x038 >> 2)
+#define GPIO_1_8V_E_RESET_TOLERANT    (0x03C >> 2)
+#define GPIO_1_8V_ABCD_DEBOUNCE_1     (0x040 >> 2)
+#define GPIO_1_8V_ABCD_DEBOUNCE_2     (0x044 >> 2)
+#define GPIO_1_8V_E_DEBOUNCE_1        (0x048 >> 2)
+#define GPIO_1_8V_E_DEBOUNCE_2        (0x04C >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_1     (0x050 >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_2     (0x054 >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_3     (0x058 >> 2)
+#define GPIO_1_8V_ABCD_COMMAND_SRC_0  (0x060 >> 2)
+#define GPIO_1_8V_ABCD_COMMAND_SRC_1  (0x064 >> 2)
+#define GPIO_1_8V_E_COMMAND_SRC_0     (0x068 >> 2)
+#define GPIO_1_8V_E_COMMAND_SRC_1     (0x06C >> 2)
+#define GPIO_1_8V_ABCD_DATA_READ      (0x0C0 >> 2)
+#define GPIO_1_8V_E_DATA_READ         (0x0C4 >> 2)
+#define GPIO_1_8V_ABCD_INPUT_MASK     (0x1D0 >> 2)
+#define GPIO_1_8V_E_INPUT_MASK        (0x1D4 >> 2)
+#define GPIO_1_8V_MEM_SIZE            0x1D8
+#define GPIO_1_8V_REG_ARRAY_SIZE      (GPIO_1_8V_MEM_SIZE >> 2)
 
 static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio)
 {