@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/slab.h>
-#include <linux/clk.h>
+#include <linux/pm_runtime.h>
#include <linux/coresight.h>
#include <linux/amba/bus.h>
@@ -36,14 +36,12 @@
* @base: memory mapped base address for this component.
* @dev: the device entity associated to this component.
* @csdev: component vitals needed by the framework.
- * @clk: the clock this component is associated to.
* @priority: port selection order.
*/
struct funnel_drvdata {
void __iomem *base;
struct device *dev;
struct coresight_device *csdev;
- struct clk *clk;
unsigned long priority;
};
@@ -67,12 +65,8 @@ static int funnel_enable(struct coresight_device *csdev, int inport,
int outport)
{
struct funnel_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
- int ret;
-
- ret = clk_prepare_enable(drvdata->clk);
- if (ret)
- return ret;
+ pm_runtime_get_sync(drvdata->dev);
funnel_enable_hw(drvdata, inport);
dev_info(drvdata->dev, "FUNNEL inport %d enabled\n", inport);
@@ -98,8 +92,7 @@ static void funnel_disable(struct coresight_device *csdev, int inport,
struct funnel_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
funnel_disable_hw(drvdata, inport);
-
- clk_disable_unprepare(drvdata->clk);
+ pm_runtime_put(drvdata->dev);
dev_info(drvdata->dev, "FUNNEL inport %d disabled\n", inport);
}
@@ -153,16 +146,14 @@ static u32 get_funnel_ctrl_hw(struct funnel_drvdata *drvdata)
static ssize_t funnel_ctrl_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- int ret;
u32 val;
struct funnel_drvdata *drvdata = dev_get_drvdata(dev->parent);
- ret = clk_prepare_enable(drvdata->clk);
- if (ret)
- return ret;
+ pm_runtime_get_sync(drvdata->dev);
val = get_funnel_ctrl_hw(drvdata);
- clk_disable_unprepare(drvdata->clk);
+
+ pm_runtime_put(drvdata->dev);
return sprintf(buf, "%#x\n", val);
}
@@ -205,8 +196,7 @@ static int funnel_probe(struct amba_device *adev, const struct amba_id *id)
return PTR_ERR(base);
drvdata->base = base;
-
- drvdata->clk = adev->pclk;
+ pm_runtime_put(&adev->dev);
desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
if (!desc)
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will uprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as clk_disable_unprepare() was not called. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Rebased on the coresight git tree. - Added Ulf's review tag. --- drivers/hwtracing/coresight/coresight-funnel.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-)