diff mbox series

[v3,1/2] iio: adc: rn5t618: Add iio map

Message ID 20210712212111.18896-2-andreas@kemnade.info
State Accepted
Commit 1a844ddf06b0a6f39c9d8974dfecfda347e87cb6
Headers show
Series mfd: rn5t618: Extend ADC support | expand

Commit Message

Andreas Kemnade July 12, 2021, 9:21 p.m. UTC 
Add iio map to allow power driver to read out values as a consumer.
This approach does not block later addition of devicetree support
which would be helpful if there is an in-kernel consumer for AIN0/1.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Changes in v3:
- none

Changes in v2:
- provide consumer mapping via iio_map instead of devicetree

 drivers/iio/adc/rn5t618-adc.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/drivers/iio/adc/rn5t618-adc.c b/drivers/iio/adc/rn5t618-adc.c
index 7010c4276947..c56fccb2c8e1 100644
--- a/drivers/iio/adc/rn5t618-adc.c
+++ b/drivers/iio/adc/rn5t618-adc.c
@@ -16,6 +16,8 @@ 
 #include <linux/completion.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/machine.h>
 #include <linux/slab.h>
 
 #define RN5T618_ADC_CONVERSION_TIMEOUT   (msecs_to_jiffies(500))
@@ -189,6 +191,19 @@  static const struct iio_chan_spec rn5t618_adc_iio_channels[] = {
 	RN5T618_ADC_CHANNEL(AIN0, IIO_VOLTAGE, "AIN0")
 };
 
+static struct iio_map rn5t618_maps[] = {
+	IIO_MAP("VADP", "rn5t618-power", "vadp"),
+	IIO_MAP("VUSB", "rn5t618-power", "vusb"),
+	{ /* sentinel */ }
+};
+
+static void unregister_map(void *data)
+{
+	struct iio_dev *iio_dev = (struct iio_dev *) data;
+
+	iio_map_array_unregister(iio_dev);
+}
+
 static int rn5t618_adc_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -239,6 +254,14 @@  static int rn5t618_adc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = iio_map_array_register(iio_dev, rn5t618_maps);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(adc->dev, unregister_map, iio_dev);
+	if (ret < 0)
+		return ret;
+
 	return devm_iio_device_register(adc->dev, iio_dev);
 }