@@ -24,6 +24,7 @@
#include <linux/regmap.h>
#include <linux/swab.h>
#include <linux/types.h>
+#include <linux/units.h>
#include "i2c-designware-core.h"
@@ -350,7 +351,7 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
*
* If your hardware is free from tHD;STA issue, try this one.
*/
- return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
+ return DIV_ROUND_CLOSEST(ic_clk * tSYMBOL, MICRO) - 8 + offset;
else
/*
* Conditional expression:
@@ -366,8 +367,7 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
* The reason why we need to take into account "tf" here,
* is the same as described in i2c_dw_scl_lcnt().
*/
- return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
- - 3 + offset;
+ return DIV_ROUND_CLOSEST(ic_clk * (tSYMBOL + tf), MICRO) - 3 + offset;
}
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
@@ -383,7 +383,7 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
* account the fall time of SCL signal (tf). Default tf value
* should be 0.3 us, for safety.
*/
- return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
+ return DIV_ROUND_CLOSEST(ic_clk * (tLOW + tf), MICRO) - 1 + offset;
}
int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
@@ -31,12 +31,13 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/suspend.h>
+#include <linux/units.h>
#include "i2c-designware-core.h"
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
- return clk_get_rate(dev->clk)/1000;
+ return clk_get_rate(dev->clk) / KILO;
}
#ifdef CONFIG_ACPI
@@ -270,7 +271,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (!dev->sda_hold_time && t->sda_hold_ns)
dev->sda_hold_time =
- div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
+ DIV_S64_ROUND_CLOSEST(clk_khz * t->sda_hold_ns, MICRO);
}
adap = &dev->adapter;
Instead of open-coding DIV_ROUND_CLOSEST() and similar use the macros directly. While at it, replace numbers with predefined SI metric prefixes. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- v3: no changes drivers/i2c/busses/i2c-designware-common.c | 8 ++++---- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++-- 2 files changed, 7 insertions(+), 6 deletions(-)