diff mbox series

[2/4] arm64: dts: qcom: msm8916-wingtech-wt88047: Add touchscreen

Message ID 20210712133735.318250-2-stephan@gerhold.net
State New
Headers show
Series [1/4] arm64: dts: qcom: Add device tree for Xiaomi Redmi 2 (wingtech-wt88047) | expand

Commit Message

Stephan Gerhold July 12, 2021, 1:37 p.m. UTC 
The Xiaomi Redmi 2 has a FocalTech touchscreen. The exact model is
not mentioned anywhere, but it works just fine with the mainline
edt-ft5x06 driver when using the "edt,edt-ft5506" compatible.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../dts/qcom/msm8916-wingtech-wt88047.dts     | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 5ee35a9b7dc6..a4d8d6ff2289 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -42,6 +42,30 @@  usb_id: usb-id {
 	};
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Likely some other model but works just fine with this one */
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l17>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
 &blsp1_uart2 {
 	status = "okay";
 };
@@ -198,6 +222,22 @@  gpio_keys_default: gpio-keys-default {
 		bias-pull-up;
 	};
 
+	touchscreen_default: touchscreen-default {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+
+		reset {
+			pins = "gpio12";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	usb_id_default: usb-id-default {
 		pins = "gpio110";
 		function = "gpio";