@@ -9,3 +9,10 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_PM
+ bool "Qualcomm Power Management"
+ depends on ARCH_QCOM
+ help
+ QCOM Platform specific power driver to manage cores and L2 low power
+ modes. It interface with various system drivers to put the cores in
+ low power modes.
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_PM) += spm.o
new file mode 100644
@@ -0,0 +1,385 @@
+/*
+ * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014,2015, Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+
+#define MAX_PMIC_DATA 2
+#define MAX_SEQ_DATA 64
+#define SPM_CTL_INDEX 0x7f
+#define SPM_CTL_INDEX_SHIFT 4
+#define SPM_CTL_EN BIT(0)
+
+enum pm_sleep_mode {
+ PM_SLEEP_MODE_STBY,
+ PM_SLEEP_MODE_RET,
+ PM_SLEEP_MODE_SPC,
+ PM_SLEEP_MODE_PC,
+ PM_SLEEP_MODE_NR,
+};
+
+enum spm_reg {
+ SPM_REG_CFG,
+ SPM_REG_SPM_CTL,
+ SPM_REG_DLY,
+ SPM_REG_PMIC_DLY,
+ SPM_REG_PMIC_DATA_0,
+ SPM_REG_PMIC_DATA_1,
+ SPM_REG_VCTL,
+ SPM_REG_SEQ_ENTRY,
+ SPM_REG_SPM_STS,
+ SPM_REG_PMIC_STS,
+ SPM_REG_NR,
+};
+
+struct spm_reg_data {
+ const u8 *reg_offset;
+ u32 spm_cfg;
+ u32 spm_dly;
+ u32 pmic_dly;
+ u32 pmic_data[MAX_PMIC_DATA];
+ u8 seq[MAX_SEQ_DATA];
+ u8 start_index[PM_SLEEP_MODE_NR];
+};
+
+struct spm_driver_data {
+ void __iomem *reg_base;
+ const struct spm_reg_data *reg_data;
+};
+
+static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
+ [SPM_REG_CFG] = 0x08,
+ [SPM_REG_SPM_CTL] = 0x30,
+ [SPM_REG_DLY] = 0x34,
+ [SPM_REG_SEQ_ENTRY] = 0x80,
+};
+
+/* SPM register data for 8974, 8084 */
+static const struct spm_reg_data spm_reg_8974_8084_cpu = {
+ .reg_offset = spm_reg_offset_v2_1,
+ .spm_cfg = 0x1,
+ .spm_dly = 0x3C102800,
+ .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
+ 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
+ 0x0F },
+ .start_index[PM_SLEEP_MODE_STBY] = 0,
+ .start_index[PM_SLEEP_MODE_SPC] = 3,
+};
+
+static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
+ [SPM_REG_CFG] = 0x08,
+ [SPM_REG_SPM_CTL] = 0x20,
+ [SPM_REG_PMIC_DLY] = 0x24,
+ [SPM_REG_PMIC_DATA_0] = 0x28,
+ [SPM_REG_PMIC_DATA_1] = 0x2C,
+ [SPM_REG_SEQ_ENTRY] = 0x80,
+};
+
+/* SPM register data for 8064 */
+static const struct spm_reg_data spm_reg_8064_cpu = {
+ .reg_offset = spm_reg_offset_v1_1,
+ .spm_cfg = 0x1F,
+ .pmic_dly = 0x02020004,
+ .pmic_data[0] = 0x0084009C,
+ .pmic_data[1] = 0x00A4001C,
+ .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
+ 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
+ .start_index[PM_SLEEP_MODE_STBY] = 0,
+ .start_index[PM_SLEEP_MODE_SPC] = 2,
+};
+
+static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
+
+typedef int (*idle_fn)(int);
+static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
+
+static inline void spm_register_write(struct spm_driver_data *drv,
+ enum spm_reg reg, u32 val)
+{
+ if (drv->reg_data->reg_offset[reg])
+ writel_relaxed(val, drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+}
+
+/* Ensure a guaranteed write, before return */
+static inline void spm_register_write_sync(struct spm_driver_data *drv,
+ enum spm_reg reg, u32 val)
+{
+ u32 ret;
+
+ if (!drv->reg_data->reg_offset[reg])
+ return;
+
+ do {
+ writel_relaxed(val, drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+ ret = readl_relaxed(drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+ if (ret == val)
+ break;
+ cpu_relax();
+ } while (1);
+}
+
+static inline u32 spm_register_read(struct spm_driver_data *drv,
+ enum spm_reg reg)
+{
+ return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
+}
+
+static void spm_set_low_power_mode(struct spm_driver_data *drv,
+ enum pm_sleep_mode mode)
+{
+ u32 start_index;
+ u32 ctl_val;
+
+ start_index = drv->reg_data->start_index[mode];
+
+ ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
+ ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
+ ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
+ ctl_val |= SPM_CTL_EN;
+ spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
+}
+
+static int qcom_pm_collapse(unsigned long int unused)
+{
+ qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON);
+
+ /*
+ * Returns here only if there was a pending interrupt and we did not
+ * power down as a result.
+ */
+ return -1;
+}
+
+static int qcom_cpu_spc(int cpu)
+{
+ int ret;
+ struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
+
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
+ ret = cpu_suspend(0, qcom_pm_collapse);
+ /*
+ * ARM common code executes WFI without calling into our driver and
+ * if the SPM mode is not reset, then we may accidently power down the
+ * cpu when we intended only to gate the cpu clock.
+ * Ensure the state is set to standby before returning.
+ */
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+
+ return ret;
+}
+
+static int qcom_idle_enter(int cpu, unsigned long index)
+{
+ return per_cpu(qcom_idle_ops, cpu)[index](cpu);
+}
+
+static const struct of_device_id qcom_idle_state_match[] __initconst = {
+ { .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc },
+ { },
+};
+
+static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
+{
+ const struct of_device_id *match_id;
+ struct device_node *state_node;
+ int i;
+ int state_count = 1;
+ idle_fn idle_fns[CPUIDLE_STATE_MAX];
+ idle_fn *fns;
+ cpumask_t mask;
+ bool use_scm_power_down = false;
+
+ for (i = 0; ; i++) {
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ if (!state_node)
+ break;
+
+ if (!of_device_is_available(state_node))
+ continue;
+
+ if (i == CPUIDLE_STATE_MAX) {
+ pr_warn("%s: cpuidle states reached max possible\n",
+ __func__);
+ break;
+ }
+
+ match_id = of_match_node(qcom_idle_state_match, state_node);
+ if (!match_id)
+ return -ENODEV;
+
+ idle_fns[state_count] = match_id->data;
+
+ /* Check if any of the states allow power down */
+ if (match_id->data == qcom_cpu_spc)
+ use_scm_power_down = true;
+
+ state_count++;
+ }
+
+ if (state_count == 1)
+ goto check_spm;
+
+ fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns),
+ GFP_KERNEL);
+ if (!fns)
+ return -ENOMEM;
+
+ for (i = 1; i < state_count; i++)
+ fns[i] = idle_fns[i];
+
+ if (use_scm_power_down) {
+ /* We have atleast one power down mode */
+ cpumask_clear(&mask);
+ cpumask_set_cpu(cpu, &mask);
+ qcom_scm_set_warm_boot_addr(cpu_resume, &mask);
+ }
+
+ per_cpu(qcom_idle_ops, cpu) = fns;
+
+ /*
+ * SPM probe for the cpu should have happened by now, if the
+ * SPM device does not exist, return -ENXIO to indicate that the
+ * cpu does not support idle states.
+ */
+check_spm:
+ return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;
+}
+
+static struct cpuidle_ops qcom_cpuidle_ops __initdata = {
+ .suspend = qcom_idle_enter,
+ .init = qcom_cpuidle_init,
+};
+
+CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops);
+CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops);
+
+static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
+ int *spm_cpu)
+{
+ struct spm_driver_data *drv = NULL;
+ struct device_node *cpu_node, *saw_node;
+ int cpu;
+ bool found;
+
+ for_each_possible_cpu(cpu) {
+ cpu_node = of_cpu_device_node_get(cpu);
+ if (!cpu_node)
+ continue;
+ saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+ found = (saw_node == pdev->dev.of_node);
+ of_node_put(saw_node);
+ of_node_put(cpu_node);
+ if (found)
+ break;
+ }
+
+ if (found) {
+ drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
+ if (drv)
+ *spm_cpu = cpu;
+ }
+
+ return drv;
+}
+
+static const struct of_device_id spm_match_table[] = {
+ { .compatible = "qcom,msm8974-saw2-v2.1-cpu",
+ .data = &spm_reg_8974_8084_cpu },
+ { .compatible = "qcom,apq8084-saw2-v2.1-cpu",
+ .data = &spm_reg_8974_8084_cpu },
+ { .compatible = "qcom,apq8064-saw2-v1.1-cpu",
+ .data = &spm_reg_8064_cpu },
+ { },
+};
+
+static int spm_dev_probe(struct platform_device *pdev)
+{
+ struct spm_driver_data *drv;
+ struct resource *res;
+ const struct of_device_id *match_id;
+ void __iomem *addr;
+ int cpu;
+
+ drv = spm_get_drv(pdev, &cpu);
+ if (!drv)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drv->reg_base))
+ return PTR_ERR(drv->reg_base);
+
+ match_id = of_match_node(spm_match_table, pdev->dev.of_node);
+ if (!match_id)
+ return -ENODEV;
+
+ drv->reg_data = match_id->data;
+
+ /* Write the SPM sequences first.. */
+ addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
+ __iowrite32_copy(addr, drv->reg_data->seq,
+ ARRAY_SIZE(drv->reg_data->seq) / 4);
+
+ /*
+ * ..and then the control registers.
+ * On some SoC if the control registers are written first and if the
+ * CPU was held in reset, the reset signal could trigger the SPM state
+ * machine, before the sequences are completely written.
+ */
+ spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
+ spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
+ spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_0,
+ drv->reg_data->pmic_data[0]);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_1,
+ drv->reg_data->pmic_data[1]);
+
+ /* Set up Standby as the default low power mode */
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+
+ per_cpu(cpu_spm_drv, cpu) = drv;
+
+ return 0;
+}
+
+static struct platform_driver spm_driver = {
+ .probe = spm_dev_probe,
+ .driver = {
+ .name = "saw",
+ .of_match_table = spm_match_table,
+ },
+};
+module_platform_driver(spm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SAW power controller driver");
+MODULE_ALIAS("platform:saw");