diff mbox

[01/10] ARM: dts: apq8064: add RPM regulators support

Message ID 1428567761-10765-1-git-send-email-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla April 9, 2015, 8:22 a.m. UTC 
This patch adds rpm node to apq8064 dt as rpm would be used by other
devices for regulator support. Also adds all the regulators in the rpm.

Most content of this patch was originally posted by Stephen Boyd on the
list.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 272 ++++++++++++++++++++++++++++++++++++
 1 file changed, 272 insertions(+)

Comments

Srinivas Kandagatla April 9, 2015, 9:18 p.m. UTC | #1 
Thanks Bjorn for comments

On 09/04/15 21:16, Bjorn Andersson wrote:
> On Thu 09 Apr 01:22 PDT 2015, Srinivas Kandagatla wrote:
>
>> This patch adds rpm node to apq8064 dt as rpm would be used by other
>> devices for regulator support. Also adds all the regulators in the rpm.
>>
>> Most content of this patch was originally posted by Stephen Boyd on the
>> list.
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   arch/arm/boot/dts/qcom-apq8064.dtsi | 272 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 272 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
>> index 6c15112..d9166eb 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
>> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
>> @@ -3,6 +3,7 @@
>>   #include "skeleton.dtsi"
>>   #include <dt-bindings/clock/qcom,gcc-msm8960.h>
>>   #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
>> +#include <dt-bindings/mfd/qcom-rpm.h>
>>   #include <dt-bindings/soc/qcom,gsbi.h>
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>
>> @@ -276,6 +277,277 @@
>>   			#reset-cells = <1>;
>>   		};
>>
>> +		l2cc: clock-controller@2011000 {
>> +			compatible	= "syscon";
>> +			reg		= <0x2011000 0x1000>;
>> +		};
>> +
>> +		rpm@108000 {
>> +			compatible	= "qcom,rpm-apq8064";
>> +			reg		= <0x108000 0x1000>;
>> +			qcom,ipc	= <&l2cc 0x8 2>;
>> +
>> +			interrupts	= <GIC_SPI 19 IRQ_TYPE_NONE>,
>> +					  <GIC_SPI 21 IRQ_TYPE_NONE>,
>> +					  <GIC_SPI 22 IRQ_TYPE_NONE>;
>
> All three interrupts should be IRQ_TYPE_EDGE_RISING, currently the
> driver overrides this with IRQF_TRIGGER_RISING but it should just obey
> the dt.

Yes, I will change the type to IRQF_TRIGGER_RISING in next version.
>
>> +			interrupt-names	= "ack", "err", "wakeup";
>> +
>> +			regulators {
>> +				compatible = "qcom,rpm-pm8921-regulators";
>> +				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
>> +				vin_lvs1_3_6-supply = <&pm8921_s4>;
>> +				vin_lvs2-supply = <&pm8921_s4>;
>> +				vin_lvs4_5_7-supply = <&pm8921_s4>;
>> +				vdd_ncp-supply = <&pm8921_l6>;
>> +				vdd_l24-supply = <&pm8921_s1>;
>> +				vdd_l25-supply = <&pm8921_s1>;
>> +				vdd_l27-supply = <&pm8921_s7>;
>> +				vdd_l28-supply = <&pm8921_s7>;
>
> These are actually possible to change when designing a device, but
> it's not unlikely that everyone have these values so they are reasonable
> to have here.
Ok.
>
> But for several of the regulators we're running our 8064 devices with
> different configuration, especially voltage, so I don't think they
> should be specified here.
>
Yep it makes sense, I will move the voltage ranges to the board specific 
dts files.
> Having the phandles listed here are sane though, so that we can address
> them from the platform files.
	>
>> +
>> +				/* Buck SMPS */
>> +				pm8921_s1: s1 {
>> +					regulator-always-on;
>> +					regulator-min-microvolt = <1225000>;
>> +					regulator-max-microvolt = <1225000>;
>> +					qcom,switch-mode-frequency = <3200000>;
>> +					bias-pull-down;
>> +				};
>> +
> [..]
>
> Regards,
> Bjorn
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 6c15112..d9166eb 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -3,6 +3,7 @@ 
 #include "skeleton.dtsi"
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
@@ -276,6 +277,277 @@ 
 			#reset-cells = <1>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-apq8064";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_NONE>,
+					  <GIC_SPI 21 IRQ_TYPE_NONE>,
+					  <GIC_SPI 22 IRQ_TYPE_NONE>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+				vdd_ncp-supply = <&pm8921_l6>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s2: s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				pm8921_s4: s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode =
+						<QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				pm8921_s8: s8 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				/* PMOS LDO */
+				pm8921_l1: l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					bias-pull-down;
+				};
+
+				pm8921_l2: l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l6: l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l7: l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l8: l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l9: l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l10: l10 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+
+				pm8921_l11: l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l12: l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l13: l13 {
+					regulator-min-microvolt = <2220000>;
+					regulator-max-microvolt = <2220000>;
+				};
+
+				pm8921_l14: l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l15: l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l16: l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l17: l17 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l18: l18 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l21: l21 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l22: l22 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l24: l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8921_l25: l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				pm8921_l27: l27 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				pm8921_l28: l28 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l29: l29 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs2: lvs2 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs3: lvs3 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs4: lvs4 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs5: lvs5 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs7: lvs7 {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				pm8921_hdmi_switch: hdmi-switch {
+					bias-pull-down;
+				};
+			};
+		};
+
 		/* Temporary fixed regulator */
 		vsdcc_fixed: vsdcc-regulator {
 			compatible = "regulator-fixed";