diff mbox series

clk: qcom: gdsc: Ensure regulator init state matches GDSC state

Message ID 20210625225414.1318338-1-bjorn.andersson@linaro.org
State New
Headers show
Series clk: qcom: gdsc: Ensure regulator init state matches GDSC state | expand

Commit Message

Bjorn Andersson June 25, 2021, 10:54 p.m. UTC
As GDSCs are registered and found to be already enabled
gdsc_toggle_logic() will be invoked for votable GDSCs and ensure that
the vote is matching the hardware state. Part of this the related
regulator will be enabled.

But for non-votable GDSCs the regulator and GDSC status will be out of
sync and as the GDSC is later disabled regulator_disable() will face an
unbalanced enable-count, or something might turn off the supply under
the feet of the GDSC.

So ensure that the regulator is enabled even for non-votable GDSCs.

Cc: stable@vger.kernel.org
Fixes: 37416e554961 ("clk: qcom: gdsc: Handle GDSC regulator supplies")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
 drivers/clk/qcom/gdsc.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

-- 
2.29.2

Comments

Vinod Koul June 28, 2021, 5:42 a.m. UTC | #1
On 25-06-21, 15:54, Bjorn Andersson wrote:
> As GDSCs are registered and found to be already enabled

> gdsc_toggle_logic() will be invoked for votable GDSCs and ensure that

> the vote is matching the hardware state. Part of this the related

> regulator will be enabled.

> 

> But for non-votable GDSCs the regulator and GDSC status will be out of

> sync and as the GDSC is later disabled regulator_disable() will face an

> unbalanced enable-count, or something might turn off the supply under

> the feet of the GDSC.

> 

> So ensure that the regulator is enabled even for non-votable GDSCs.


Reviewed-by: Vinod Koul <vkoul@kernel.org>


-- 
~Vinod
Bjorn Andersson June 29, 2021, 9:05 p.m. UTC | #2
On Fri 25 Jun 17:54 CDT 2021, Bjorn Andersson wrote:

> As GDSCs are registered and found to be already enabled
> gdsc_toggle_logic() will be invoked for votable GDSCs and ensure that
> the vote is matching the hardware state. Part of this the related
> regulator will be enabled.
> 
> But for non-votable GDSCs the regulator and GDSC status will be out of
> sync and as the GDSC is later disabled regulator_disable() will face an
> unbalanced enable-count, or something might turn off the supply under
> the feet of the GDSC.
> 
> So ensure that the regulator is enabled even for non-votable GDSCs.
> 
> Cc: stable@vger.kernel.org
> Fixes: 37416e554961 ("clk: qcom: gdsc: Handle GDSC regulator supplies")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  drivers/clk/qcom/gdsc.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
> index 51ed640e527b..f7e7759cdb90 100644
> --- a/drivers/clk/qcom/gdsc.c
> +++ b/drivers/clk/qcom/gdsc.c
> @@ -359,10 +359,17 @@ static int gdsc_init(struct gdsc *sc)
>  
>  	/*
>  	 * Votable GDSCs can be ON due to Vote from other masters.
> -	 * If a Votable GDSC is ON, make sure we have a Vote.
> +	 * If a Votable GDSC is ON, make sure we have a Vote. If
> +	 * non-votable, ensure that the supply is kept enabled (as
> +	 * is done by gdsc_enable).
>  	 */
> -	if ((sc->flags & VOTABLE) && on)
> +	if ((sc->flags & VOTABLE) && on) {
>  		gdsc_enable(&sc->pd);
> +	} else if (on) {

I somehow lost the check for sc->rsupply != NULL while trying to make
this readable. In other words, this is broken.

Regards,
Bjorn

> +		ret = regulator_enable(sc->rsupply);
> +		if (ret < 0)
> +			return ret;
> +	}
>  
>  	/*
>  	 * Make sure the retain bit is set if the GDSC is already on, otherwise
> -- 
> 2.29.2
>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index 51ed640e527b..f7e7759cdb90 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -359,10 +359,17 @@  static int gdsc_init(struct gdsc *sc)
 
 	/*
 	 * Votable GDSCs can be ON due to Vote from other masters.
-	 * If a Votable GDSC is ON, make sure we have a Vote.
+	 * If a Votable GDSC is ON, make sure we have a Vote. If
+	 * non-votable, ensure that the supply is kept enabled (as
+	 * is done by gdsc_enable).
 	 */
-	if ((sc->flags & VOTABLE) && on)
+	if ((sc->flags & VOTABLE) && on) {
 		gdsc_enable(&sc->pd);
+	} else if (on) {
+		ret = regulator_enable(sc->rsupply);
+		if (ret < 0)
+			return ret;
+	}
 
 	/*
 	 * Make sure the retain bit is set if the GDSC is already on, otherwise