diff mbox series

[v3,10/11] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver

Message ID 20210624192200.22559-11-p.yadav@ti.com
State Superseded
Headers show
Series CSI2RX support on J721E | expand

Commit Message

Pratyush Yadav June 24, 2021, 7:21 p.m. UTC
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>

---

(no changes since v2)

Changes in v2:
- Rename to ti,j721e-csi2rx.yaml
- Add an entry in MAINTAINERS.
- Add a description for the binding.
- Change compatible to ti,j721e-csi2rx to make it SoC specific.
- Remove description from dmas, reg, power-domains.
- Remove a limit of 2 from #address-cells and #size-cells.
- Fix add ^ to csi-bridge subnode regex.
- Make ranges mandatory.
- Add unit address in example.
- Add a reference to cdns,csi2rx in csi-bridge subnode.
- Expand the example to include the csi-bridge subnode as well.
- Re-order subject prefixes.

 .../bindings/media/ti,j721e-csi2rx.yaml       | 101 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml

Comments

Rob Herring July 1, 2021, 2:02 p.m. UTC | #1
On Fri, 25 Jun 2021 00:51:59 +0530, Pratyush Yadav wrote:
> TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate

> capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the

> parts together.

> 

> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>

> 

> ---

> 

> (no changes since v2)

> 

> Changes in v2:

> - Rename to ti,j721e-csi2rx.yaml

> - Add an entry in MAINTAINERS.

> - Add a description for the binding.

> - Change compatible to ti,j721e-csi2rx to make it SoC specific.

> - Remove description from dmas, reg, power-domains.

> - Remove a limit of 2 from #address-cells and #size-cells.

> - Fix add ^ to csi-bridge subnode regex.

> - Make ranges mandatory.

> - Add unit address in example.

> - Add a reference to cdns,csi2rx in csi-bridge subnode.

> - Expand the example to include the csi-bridge subnode as well.

> - Re-order subject prefixes.

> 

>  .../bindings/media/ti,j721e-csi2rx.yaml       | 101 ++++++++++++++++++

>  MAINTAINERS                                   |   1 +

>  2 files changed, 102 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml

> 


My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/media/cdns,csi2rx.yaml'
xargs: dt-doc-validate: exited with status 255; aborting
make[1]: *** Deleting file 'Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dt.yaml'
Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/media/cdns,csi2rx.yaml'
make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dt.yaml] Error 255
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1416: dt_binding_check] Error 2
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1496774

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
new file mode 100644
index 000000000000..db87cfd65bed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
@@ -0,0 +1,101 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E CSI2RX Wrapper Device Tree Bindings
+
+description: |
+  The TI J721E CSI2RX Wrapper is a wrapper around Cadence CSI2RX bridge that
+  enables sending captured frames to memory over PSI-L DMA. In the J721E
+  Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the
+  CSI_RX_IF section.
+
+maintainers:
+  - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,j721e-csi2rx
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx0
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+patternProperties:
+  "^csi-bridge@":
+    type: object
+    description: CSI2 bridge node.
+    $ref: cdns,csi2rx.yaml#
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - power-domains
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    ti_csi2rx0: ticsi2rx@4500000 {
+        compatible = "ti,j721e-csi2rx";
+        dmas = <&main_udmap 0x4940>;
+        dma-names = "rx0";
+        reg = <0x4500000 0x1000>;
+        power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        cdns_csi2rx: csi-bridge@4504000 {
+            compatible = "cdns,csi2rx";
+            reg = <0x4504000 0x1000>;
+            clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
+              <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
+            clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+              "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+            phys = <&dphy0>;
+            phy-names = "dphy";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                csi2_0: port@0 {
+
+                    reg = <0>;
+
+                    csi2rx0_in_sensor: endpoint {
+                        remote-endpoint = <&csi2_cam0>;
+                        bus-type = <4>; /* CSI2 DPHY. */
+                        clock-lanes = <0>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 96f002b9046d..e9b110115e5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18471,6 +18471,7 @@  TI J721E CSI2RX DRIVER
 M:	Pratyush Yadav <p.yadav@ti.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
 F:	drivers/media/platform/ti/j721e-csi2rx/
 
 TI DAVINCI MACHINE SUPPORT