@@ -529,7 +529,7 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
MemoryRegionAccessFn *access_fn;
uint64_t access_mask;
unsigned access_size;
- unsigned i;
+ signed access_sh;
MemTxResult r = MEMTX_OK;
if (!access_size_min) {
@@ -547,7 +547,6 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
: memory_region_read_with_attrs_accessor);
}
- /* FIXME: support unaligned access? */
/*
* Check for a small access.
*/
@@ -557,6 +556,10 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
* cycle, and many mmio registers have side-effects on read.
* In practice, this appears to be either (1) model error,
* or (2) guest error via the fuzzer.
+ *
+ * TODO: Are all short reads also guest or model errors, because
+ * of said side effects? Or is this valid read-for-effect then
+ * discard the (complete) result via narrow destination register?
*/
if (write) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid short write: %s "
@@ -566,22 +569,134 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
access_size_min, access_size_max);
return MEMTX_ERROR;
}
+
+ /*
+ * If the original access is aligned, we can always extract
+ * from a single larger load.
+ */
+ access_size = access_size_min;
+ if (likely((addr & (size - 1)) == 0)) {
+ goto extract;
+ }
+
+ /*
+ * TODO: We could search for a larger load that happens to
+ * cover the unaligned load, but at some point we will always
+ * require two operations. Extract from two loads.
+ */
+ goto extract2;
}
+ /*
+ * Check for size in range.
+ */
+ if (likely(size <= access_size_max)) {
+ /*
+ * If the access is aligned or if the model supports
+ * unaligned accesses, use one operation directly.
+ */
+ if (likely((addr & (size - 1)) == 0) || mr->ops->impl.unaligned) {
+ access_size = size;
+ access_sh = 0;
+ goto direct;
+ }
+ }
+
+ /*
+ * It is certain that we require multiple operations.
+ * If the access is aligned (or the model supports unaligned),
+ * then we will perform N accesses which exactly cover the
+ * operation requested.
+ */
access_size = MAX(MIN(size, access_size_max), access_size_min);
+ if (unlikely(addr & (access_size - 1))) {
+ unsigned lsb = addr & -addr;
+ if (lsb >= access_size_min) {
+ /*
+ * The model supports small enough loads that we can
+ * exactly match the operation requested. For reads,
+ * this is preferable to touching more than requested.
+ * For writes, this is mandatory.
+ */
+ access_size = lsb;
+ } else if (write) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid unaligned write: %s "
+ "hwaddr: 0x%" HWADDR_PRIx " size: %u "
+ "min: %u max: %u\n", __func__,
+ memory_region_name(mr), addr, size,
+ access_size_min, access_size_max);
+ return MEMTX_ERROR;
+ } else if (size <= access_size_max) {
+ /* As per above, we can use two loads to implement. */
+ access_size = size;
+ goto extract2;
+ } else {
+ /*
+ * TODO: becaseu access_size_max is small, this case requires
+ * more than 2 loads to assemble and extract. Bail out.
+ */
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Unhandled unaligned read: %s "
+ "hwaddr: 0x%" HWADDR_PRIx " size: %u "
+ "min: %u max: %u\n", __func__,
+ memory_region_name(mr), addr, size,
+ access_size_min, access_size_max);
+ return MEMTX_ERROR;
+ }
+ }
+
access_mask = MAKE_64BIT_MASK(0, access_size * 8);
if (memory_region_big_endian(mr)) {
- for (i = 0; i < size; i += access_size) {
+ for (unsigned i = 0; i < size; i += access_size) {
r |= access_fn(mr, addr + i, value, access_size,
- (size - access_size - i) * 8, access_mask, attrs);
+ (size - access_size - i) * 8, access_mask, attrs);
}
} else {
- for (i = 0; i < size; i += access_size) {
+ for (unsigned i = 0; i < size; i += access_size) {
r |= access_fn(mr, addr + i, value, access_size, i * 8,
- access_mask, attrs);
+ access_mask, attrs);
}
}
return r;
+
+ extract2:
+ /*
+ * Extract from one or two loads to produce the result.
+ * Validate that we need two loads before performing them.
+ */
+ access_sh = addr & (access_size - 1);
+ if (access_sh + size > access_size) {
+ addr &= ~(access_size - 1);
+ if (memory_region_big_endian(mr)) {
+ access_sh = (access_size - access_sh) * 8;
+ r |= access_fn(mr, addr, value, access_size, access_sh, -1, attrs);
+ access_sh -= access_size * 8;
+ r |= access_fn(mr, addr, value, access_size, access_sh, -1, attrs);
+ } else {
+ access_sh = (access_sh - access_size) * 8;
+ r |= access_fn(mr, addr, value, access_size, access_sh, -1, attrs);
+ access_sh += access_size * 8;
+ r |= access_fn(mr, addr, value, access_size, access_sh, -1, attrs);
+ }
+ *value &= MAKE_64BIT_MASK(0, size * 8);
+ return r;
+ }
+
+ extract:
+ /*
+ * Extract from one larger load to produce the result.
+ */
+ access_sh = addr & (access_size - 1);
+ addr &= ~(access_size - 1);
+ if (memory_region_big_endian(mr)) {
+ access_sh = access_size - size - access_sh;
+ }
+ /* Note that with this interface, right shift is negative. */
+ access_sh *= -8;
+
+ direct:
+ access_mask = MAKE_64BIT_MASK(0, size * 8);
+ return access_fn(mr, addr, value, access_size, access_sh,
+ access_mask, attrs);
}
static AddressSpace *memory_region_to_address_space(MemoryRegion *mr)
Decline to support writes that cannot be covered by access_size_min. Decline to support unaligned reads that require extraction from more than two reads. Do support exact size match when the model supports unaligned. Do support reducing the operation size to match the alignment. Do support loads that extract from 1 or 2 larger loads. Diagnose anything that we do not handle via LOG_GUEST_ERROR, as any of these cases are probably model or guest errors. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- softmmu/memory.c | 127 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 121 insertions(+), 6 deletions(-) -- 2.25.1