diff mbox series

backlight: lm3630a: convert to atomic PWM API and check for errors

Message ID 20210618085844.231751-1-u.kleine-koenig@pengutronix.de
State Superseded
Headers show
Series backlight: lm3630a: convert to atomic PWM API and check for errors | expand

Commit Message

Uwe Kleine-König June 18, 2021, 8:58 a.m. UTC
The practical upside here is that this only needs a single API call to
program the hardware which (depending on the underlaying hardware) can
be more effective and prevents glitches.

Up to now the return value of the pwm functions was ignored. Fix this
and propagate the error to the caller.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/video/backlight/lm3630a_bl.c | 33 +++++++++++++++-------------
 1 file changed, 18 insertions(+), 15 deletions(-)

Comments

Daniel Thompson June 18, 2021, 10:31 a.m. UTC | #1
On Fri, Jun 18, 2021 at 10:58:44AM +0200, Uwe Kleine-König wrote:
> The practical upside here is that this only needs a single API call to
> program the hardware which (depending on the underlaying hardware) can
> be more effective and prevents glitches.
> 
> Up to now the return value of the pwm functions was ignored. Fix this
> and propagate the error to the caller.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

New code looks OK but these changes reveal just how crazy the return codes
from this driver's update_status() methods are since now the new (PWM) error path is
structured completely differently to the existing (I2C) error path.

update_status() should return 0 on success and a -ve errno otherwise.

Thus the new code to return -errno is correct and so is the I2C success
code path. However the PWM success path and the I2C error path are both
broken.

Are you OK to add a patch *before* this one to fix the existing code
paths before making the PWM changes?


Daniel.

> ---
>  drivers/video/backlight/lm3630a_bl.c | 33 +++++++++++++++-------------
>  1 file changed, 18 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
> index e88a2b0e5904..24fa7e6938fa 100644
> --- a/drivers/video/backlight/lm3630a_bl.c
> +++ b/drivers/video/backlight/lm3630a_bl.c
> @@ -52,6 +52,7 @@ struct lm3630a_chip {
>  	struct gpio_desc *enable_gpio;
>  	struct regmap *regmap;
>  	struct pwm_device *pwmd;
> +	struct pwm_state pwmd_state;
>  };
>  
>  /* i2c access */
> @@ -167,16 +168,19 @@ static int lm3630a_intr_config(struct lm3630a_chip *pchip)
>  	return rval;
>  }
>  
> -static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
> +static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
>  {
> -	unsigned int period = pchip->pdata->pwm_period;
> -	unsigned int duty = br * period / br_max;
> +	int err;
>  
> -	pwm_config(pchip->pwmd, duty, period);
> -	if (duty)
> -		pwm_enable(pchip->pwmd);
> -	else
> -		pwm_disable(pchip->pwmd);
> +	pchip->pwmd_state.period = pchip->pdata->pwm_period;
> +
> +	err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max);
> +	if (err)
> +		return err;
> +
> +	pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false;
> +
> +	return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state);
>  }
>  
>  /* update and get brightness */
> @@ -188,8 +192,11 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
>  
>  	/* pwm control */
>  	if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
> -		lm3630a_pwm_ctrl(pchip, bl->props.brightness,
> -				 bl->props.max_brightness);
> +		ret = lm3630a_pwm_ctrl(pchip, bl->props.brightness,
> +				       bl->props.max_brightness);
> +		if (ret)
> +			return ret;
> +
>  		return bl->props.brightness;
>  	}
>  
> @@ -563,11 +570,7 @@ static int lm3630a_probe(struct i2c_client *client,
>  			return PTR_ERR(pchip->pwmd);
>  		}
>  
> -		/*
> -		 * FIXME: pwm_apply_args() should be removed when switching to
> -		 * the atomic PWM API.
> -		 */
> -		pwm_apply_args(pchip->pwmd);
> +		pwm_init_state(pchip->pwmd, &pchip->pwmd_state);
>  	}
>  
>  	/* interrupt enable  : irq 0 is not allowed */
> -- 
> 2.30.2
>
diff mbox series

Patch

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index e88a2b0e5904..24fa7e6938fa 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -52,6 +52,7 @@  struct lm3630a_chip {
 	struct gpio_desc *enable_gpio;
 	struct regmap *regmap;
 	struct pwm_device *pwmd;
+	struct pwm_state pwmd_state;
 };
 
 /* i2c access */
@@ -167,16 +168,19 @@  static int lm3630a_intr_config(struct lm3630a_chip *pchip)
 	return rval;
 }
 
-static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
+static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
 {
-	unsigned int period = pchip->pdata->pwm_period;
-	unsigned int duty = br * period / br_max;
+	int err;
 
-	pwm_config(pchip->pwmd, duty, period);
-	if (duty)
-		pwm_enable(pchip->pwmd);
-	else
-		pwm_disable(pchip->pwmd);
+	pchip->pwmd_state.period = pchip->pdata->pwm_period;
+
+	err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max);
+	if (err)
+		return err;
+
+	pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false;
+
+	return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state);
 }
 
 /* update and get brightness */
@@ -188,8 +192,11 @@  static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 
 	/* pwm control */
 	if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
-		lm3630a_pwm_ctrl(pchip, bl->props.brightness,
-				 bl->props.max_brightness);
+		ret = lm3630a_pwm_ctrl(pchip, bl->props.brightness,
+				       bl->props.max_brightness);
+		if (ret)
+			return ret;
+
 		return bl->props.brightness;
 	}
 
@@ -563,11 +570,7 @@  static int lm3630a_probe(struct i2c_client *client,
 			return PTR_ERR(pchip->pwmd);
 		}
 
-		/*
-		 * FIXME: pwm_apply_args() should be removed when switching to
-		 * the atomic PWM API.
-		 */
-		pwm_apply_args(pchip->pwmd);
+		pwm_init_state(pchip->pwmd, &pchip->pwmd_state);
 	}
 
 	/* interrupt enable  : irq 0 is not allowed */