@@ -1,7 +1,7 @@
* ARM AMBA Primecell PL011 serial UART
Required properties:
-- compatible: must be "arm,primecell", "arm,pl011"
+- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
- reg: exactly one register range with length 0x1000
- interrupts: exactly one interrupt specifier
@@ -47,12 +47,12 @@ config SERIAL_AMBA_PL010_CONSOLE
config SERIAL_AMBA_PL011
tristate "ARM AMBA PL011 serial port support"
- depends on ARM_AMBA
+ depends on ARM_AMBA || SOC_ZX296702
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
- here.
+ here. Say yes if you have SOC_ZX296702.
If unsure, say N.
@@ -74,6 +74,10 @@ static u8 *reg_lut;
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
+ unsigned int fr_busy;
+ unsigned int fr_dsr;
+ unsigned int fr_cts;
+ unsigned int u1_fr_ri;
u8 *reg_lut;
bool oversampling;
bool dma_threshold;
@@ -82,6 +86,7 @@ struct vendor_data {
unsigned int (*get_fifosize)(struct amba_device *dev);
};
+#ifdef CONFIG_ARM_AMBA
static unsigned int get_fifosize_arm(struct amba_device *dev)
{
return amba_rev(dev) < 3 ? 16 : 32;
@@ -112,6 +117,10 @@ static u8 arm_reg[] = {
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .u1_fr_ri = UART011_FR_RI,
.reg_lut = arm_reg,
.oversampling = false,
.dma_threshold = false,
@@ -149,12 +158,60 @@ static u8 st_reg[] = {
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .u1_fr_ri = UART011_FR_RI,
.reg_lut = st_reg,
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
.get_fifosize = get_fifosize_st,
};
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static unsigned int get_fifosize_zx(struct amba_device *dev)
+{
+ return 16;
+}
+
+static u8 zx_reg[] = {
+ /* Remap, origin */
+ 0x04, /* 0x00 */
+ 0x04, /* 0x04 */
+ 0x08, /* 0x08 */
+ 0x0C, /* 0x0c */
+ 0x10, /* 0x10 */
+ 0x14, /* 0x14 */
+ 0x14, /* 0x18 */
+ 0x1c, /* 0x1c */
+ 0x20, /* 0x20 */
+ 0x24, /* 0x24 */
+ 0x28, /* 0x28 */
+ 0x30, /* 0x2c */
+ 0x34, /* 0x30 */
+ 0x38, /* 0x34 */
+ 0x40, /* 0x38 */
+ 0x3c, /* 0x3c */
+ 0x48, /* 0x40 */
+ 0x4c, /* 0x44 */
+ 0x50, /* 0x48 */
+};
+
+static struct vendor_data vendor_zx = {
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = ZX_UART01x_FR_BUSY,
+ .fr_dsr = ZX_UART01x_FR_DSR,
+ .fr_cts = ZX_UART01x_FR_CTS,
+ .u1_fr_ri = ZX_UART011_FR_RI,
+ .reg_lut = zx_reg,
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .get_fifosize = get_fifosize_zx,
+};
+#endif
/* Deals with DMA transactions */
@@ -197,6 +254,10 @@ struct uart_amba_port {
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
+ unsigned int fr_busy; /* vendor-specific */
+ unsigned int fr_dsr; /* vendor-specific */
+ unsigned int fr_cts; /* vendor-specific */
+ unsigned int u1_fr_ri; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
bool autorts;
char type[12];
@@ -1156,7 +1217,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (pl011_readw(&uap->port, UART01x_FR) & UART01x_FR_BUSY)
+ while (pl011_readw(&uap->port, UART01x_FR) & uap->fr_busy)
barrier();
spin_lock_irq(&uap->port.lock);
@@ -1383,11 +1444,11 @@ static void pl011_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_DCD)
uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
- if (delta & UART01x_FR_DSR)
+ if (delta & uap->fr_dsr)
uap->port.icount.dsr++;
- if (delta & UART01x_FR_CTS)
- uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+ if (delta & uap->fr_cts)
+ uart_handle_cts_change(&uap->port, status & uap->fr_cts);
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
@@ -1450,12 +1511,17 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
static unsigned int pl011_tx_empty(struct uart_port *port)
{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+
unsigned int status = pl011_readw(port, UART01x_FR);
- return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ return status & (uap->fr_busy|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
static unsigned int pl011_get_mctrl(struct uart_port *port)
{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
unsigned int result = 0;
unsigned int status = pl011_readw(port, UART01x_FR);
@@ -1464,9 +1530,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
result |= tiocmbit
TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
- TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
- TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
- TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
+ TIOCMBIT(uap->fr_dsr, TIOCM_DSR);
+ TIOCMBIT(uap->fr_cts, TIOCM_CTS);
+ TIOCMBIT(uap->u1_fr_ri, TIOCM_RNG);
#undef TIOCMBIT
return result;
}
@@ -1661,7 +1727,7 @@ static int pl011_startup(struct uart_port *port)
pl011_writew(port, 1, UART011_IBRD);
pl011_write_lcr_h(uap, 0);
pl011_writew(&uap->port, 0, UART01x_DR);
- while (pl011_readw(port, UART01x_FR) & UART01x_FR_BUSY)
+ while (pl011_readw(port, UART01x_FR) & uap->fr_busy)
barrier();
pl011_writew(port, fbrd, UART011_FBRD);
@@ -2045,7 +2111,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
*/
do {
status = pl011_readw(&uap->port, UART01x_FR);
- } while (status & UART01x_FR_BUSY);
+ } while (status & uap->fr_busy);
pl011_writew(&uap->port, old_cr, UART011_CR);
if (locked)
@@ -2150,10 +2216,13 @@ static struct console amba_console = {
static void pl011_putc(struct uart_port *port, int c)
{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+
while (pl011_readw(port, UART01x_FR) & UART01x_FR_TXFF)
;
pl011_writeb(port, c, UART01x_DR);
- while (pl011_readw(port, UART01x_FR) & UART01x_FR_BUSY)
+ while (pl011_readw(port, UART01x_FR) & uap->fr_busy)
;
}
@@ -2190,6 +2259,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
+#ifdef CONFIG_ARM_AMBA
static int pl011_probe_dt_alias(int index, struct device *dev)
{
struct device_node *np;
@@ -2254,6 +2324,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
reg_lut = vendor->reg_lut;
uap->vendor = vendor;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->u1_fr_ri = vendor->u1_fr_ri;
uap->old_cr = 0;
uap->fifosize = vendor->get_fifosize(dev);
uap->port.dev = &dev->dev;
@@ -2314,6 +2388,101 @@ static int pl011_remove(struct amba_device *dev)
uart_unregister_driver(&amba_reg);
return 0;
}
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static int zx_uart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct uart_amba_port *uap;
+ struct vendor_data *vendor = &vendor_zx;
+ struct resource *res;
+ void __iomem *base;
+ int i, ret;
+
+ uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (uap == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ i = of_alias_get_id(np, "serial");
+ if (i < 0) {
+ dev_err(&pdev->dev, "failed to get alias id: %d\n", i);
+ ret = i;
+ goto out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (!base) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ uap->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uap->clk)) {
+ ret = PTR_ERR(uap->clk);
+ goto out;
+ }
+
+ reg_lut = vendor->reg_lut;
+ uap->vendor = vendor;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->u1_fr_ri = vendor->u1_fr_ri;
+ uap->old_cr = 0;
+ uap->fifosize = 16;
+ uap->port.dev = &pdev->dev;
+ uap->port.mapbase = res->start;
+ uap->port.membase = base;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = platform_get_irq(pdev, 0);
+ uap->port.fifosize = uap->fifosize;
+ uap->port.ops = &amba_pl011_pops;
+ uap->port.flags = UPF_BOOT_AUTOCONF;
+ uap->port.line = i;
+ uap->port.uartclk = clk_get_rate(uap->clk);
+ pl011_dma_probe(&pdev->dev, uap);
+
+ /* Ensure interrupts from this UART are masked and cleared */
+ pl011_writew(&uap->port, 0, UART011_IMSC);
+ pl011_writew(&uap->port, 0xffff, UART011_ICR);
+
+ amba_ports[i] = uap;
+
+ platform_set_drvdata(pdev, uap);
+ ret = uart_register_driver(&amba_reg);
+ if (ret < 0) {
+ pr_err("Failed to register AMBA-PL011 driver\n");
+ return ret;
+ }
+ ret = uart_add_one_port(&amba_reg, &uap->port);
+ if (ret) {
+ amba_ports[i] = NULL;
+ pl011_dma_remove(uap);
+ }
+out:
+ return ret;
+}
+
+static int zx_uart_remove(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap = platform_get_drvdata(pdev);
+ int i;
+
+ uart_remove_one_port(&amba_reg, &uap->port);
+
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
+
+ pl011_dma_remove(uap);
+ return 0;
+}
+#endif
#ifdef CONFIG_PM_SLEEP
static int pl011_suspend(struct device *dev)
@@ -2339,6 +2508,7 @@ static int pl011_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+#ifdef CONFIG_ARM_AMBA
static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
@@ -2365,16 +2535,48 @@ static struct amba_driver pl011_driver = {
.remove = pl011_remove,
};
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static const struct of_device_id zx_uart_dt_ids[] = {
+ { .compatible = "zte,zx296702-uart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zx_uart_dt_ids);
+
+static struct platform_driver zx_uart_driver = {
+ .driver = {
+ .name = "zx-uart",
+ .owner = THIS_MODULE,
+ .pm = &pl011_dev_pm_ops,
+ .of_match_table = zx_uart_dt_ids,
+ },
+ .probe = zx_uart_probe,
+ .remove = zx_uart_remove,
+};
+#endif
+
static int __init pl011_init(void)
{
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+#ifdef CONFIG_ARM_AMBA
return amba_driver_register(&pl011_driver);
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+ return platform_driver_register(&zx_uart_driver);
+#endif
}
static void __exit pl011_exit(void)
{
+#ifdef CONFIG_ARM_AMBA
amba_driver_unregister(&pl011_driver);
+#endif
+#ifdef CONFIG_SOC_ZX296702
+ platform_driver_unregister(&zx_uart_driver);
+#endif
}
/*
@@ -31,6 +31,7 @@
* UART Register Offsets.
*/
#define UART01x_DR 0x00 /* Data read or written from the interface. */
+#define ZX_UART01x_DR 0x04 /* Data read or written from the interface. */
#define UART01x_RSR 0x04 /* Receive status register (Read). */
#define UART01x_ECR 0x04 /* Error clear register (Write). */
#define UART010_LCRH 0x08 /* Line control register, high byte. */
@@ -39,6 +40,7 @@
#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */
#define UART010_LCRL 0x10 /* Line control register, low byte. */
#define UART010_CR 0x14 /* Control register. */
+#define ZX_UART01x_FR 0x14 /* Flag register (Read only). */
#define UART01x_FR 0x18 /* Flag register (Read only). */
#define UART010_IIR 0x1C /* Interrupt identification register (Read). */
#define UART010_ICR 0x1C /* Interrupt clear register (Write). */
@@ -50,14 +52,22 @@
#define UART011_LCRH 0x2c /* Line control register. */
#define UART011_LCRH_TX 0x2c /* Line control register. */
#define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */
+#define ZX_UART011_LCRH_TX 0x30 /* Tx Line control register. */
#define UART011_CR 0x30 /* Control register. */
#define UART011_IFLS 0x34 /* Interrupt fifo level select. */
+#define ZX_UART011_CR 0x34 /* Control register. */
+#define ZX_UART011_IFLS 0x38 /* Interrupt fifo level select. */
#define UART011_IMSC 0x38 /* Interrupt mask. */
#define UART011_RIS 0x3c /* Raw interrupt status. */
+#define ZX_UART011_IMSC 0x40 /* Interrupt mask. */
#define UART011_MIS 0x40 /* Masked interrupt status. */
+#define ZX_UART011_RIS 0x44 /* Raw interrupt status. */
#define UART011_ICR 0x44 /* Interrupt clear register. */
#define UART011_DMACR 0x48 /* DMA control register. */
+#define ZX_UART011_MIS 0x48 /* Masked interrupt status. */
+#define ZX_UART011_ICR 0x4c /* Interrupt clear register. */
#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */
+#define ZX_UART011_DMACR 0x50 /* DMA control register. */
#define ST_UART011_XON1 0x54 /* XON1 register. */
#define ST_UART011_XON2 0x58 /* XON2 register. */
#define ST_UART011_XOFF1 0x5C /* XON1 register. */
@@ -79,15 +89,19 @@
#define UART011_FR_TXBUSY 0x100
#define UART011_FR_RXBUSY 0x200
+#define ZX_UART01x_FR_BUSY (UART011_FR_RXBUSY | UART011_FR_TXBUSY)
#define UART011_FR_RI 0x100
#define UART011_FR_TXFE 0x080
#define UART011_FR_RXFF 0x040
#define UART01x_FR_TXFF 0x020
#define UART01x_FR_RXFE 0x010
#define UART01x_FR_BUSY 0x008
+#define ZX_UART01x_FR_DSR 0x008
#define UART01x_FR_DCD 0x004
#define UART01x_FR_DSR 0x002
+#define ZX_UART01x_FR_CTS 0x002
#define UART01x_FR_CTS 0x001
+#define ZX_UART011_FR_RI 0x001
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */
Support ZTE uart with some registers differing offset. Probe as platform device for not AMBA IP ID is available on ZTE uart. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- Documentation/devicetree/bindings/serial/pl011.txt | 2 +- drivers/tty/serial/Kconfig | 4 +- drivers/tty/serial/amba-pl011.c | 224 ++++++++++++++++++++- include/linux/amba/serial.h | 14 ++ 4 files changed, 230 insertions(+), 14 deletions(-)