diff mbox series

[1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add DT bindings for RZ/G2L pinctrl

Message ID 20210616132641.29087-2-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series [1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add DT bindings for RZ/G2L pinctrl | expand

Commit Message

Prabhakar Mahadev Lad June 16, 2021, 1:26 p.m. UTC
Add device tree binding documentation and header file for Renesas
RZ/G2L pinctrl.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../pinctrl/renesas,rzg2l-pinctrl.yaml        | 121 ++++++++++++++++++
 include/dt-bindings/pinctrl/pinctrl-rzg2l.h   |  16 +++
 2 files changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-rzg2l.h

Comments

Rob Herring (Arm) June 16, 2021, 4:03 p.m. UTC | #1
On Wed, 16 Jun 2021 14:26:39 +0100, Lad Prabhakar wrote:
> Add device tree binding documentation and header file for Renesas
> RZ/G2L pinctrl.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
>  .../pinctrl/renesas,rzg2l-pinctrl.yaml        | 121 ++++++++++++++++++
>  include/dt-bindings/pinctrl/pinctrl-rzg2l.h   |  16 +++
>  2 files changed, 137 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-rzg2l.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.example.dts:20:18: fatal error: dt-bindings/clock/r9a07g044-cpg.h: No such file or directory
   20 |         #include <dt-bindings/clock/r9a07g044-cpg.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1416: dt_binding_check] Error 2
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1492923

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Geert Uytterhoeven June 24, 2021, 9:48 a.m. UTC | #2
Hi Prabhakar,

On Wed, Jun 16, 2021 at 3:27 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add device tree binding documentation and header file for Renesas

> RZ/G2L pinctrl.

>

> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>


Thanks for your patch!

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml

> @@ -0,0 +1,121 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: Renesas RZ/G2L combined Pin and GPIO controller

> +

> +maintainers:

> +  - Geert Uytterhoeven <geert+renesas@glider.be>

> +

> +description:

> +  The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO

> +  controller.

> +  Pin multiplexing and GPIO configuration is performed on a per-pin basis.

> +  Each port features up to 8 pins, each of them configurable for GPIO function

> +  (port mode) or in alternate function mode.

> +  Up to 8 different alternate function modes exist for each single pin.

> +

> +properties:

> +  compatible:

> +    enum:

> +      - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}

> +

> +  reg:

> +    maxItems: 1

> +

> +  gpio-controller: true

> +

> +  '#gpio-cells':

> +    const: 2

> +    description:

> +      The first cell contains the global GPIO port index, constructed using the

> +      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/pinctrl-rzg2l.h> and the


<dt-bindings/pinctrl/rzg2l-pinctrl.h>, for consistency with other Renesas
header files?

> +      second cell represents consumer flag as mentioned in ../gpio/gpio.txt

> +      E.g. "RZG2L_GPIO(39, 1)" for P39_1.

> +

> +  gpio-ranges:

> +    maxItems: 1

> +

> +  clocks:

> +    maxItems: 1

> +

> +  power-domains:

> +    maxItems: 1

> +

> +  resets:

> +    maxItems: 1

> +

> +additionalProperties:

> +  anyOf:

> +    - type: object

> +      allOf:

> +        - $ref: pincfg-node.yaml#

> +        - $ref: pinmux-node.yaml#

> +

> +      description:

> +        Pin controller client devices use pin configuration subnodes (children

> +        and grandchildren) for desired pin configuration.

> +        Client device subnodes use below standard properties.

> +

> +      properties:

> +        phandle: true

> +        function: true

> +        groups: true


RZ/G2L uses per-pin configuration, and, unlike R-Car, the configuration
registers do not have the concept of pin groups.  Hence I'm wondering
why you are using "function" and "group" properties, and not per-pin
"pinmux" properties, like RZ/A2?

> +        pins: true

> +        bias-disable: true

> +        bias-pull-down: true

> +        bias-pull-up: true

> +        drive-strength:

> +          enum: [ 2, 4, 8, 12 ]

> +        power-source:

> +          enum: [ 1800, 2500, 3300 ]

> +        slew-rate: true

> +        gpio-hog: true

> +        gpios: true

> +        input-enable: true

> +        output-high: true

> +        output-low: true

> +        line-name: true


> --- /dev/null

> +++ b/include/dt-bindings/pinctrl/pinctrl-rzg2l.h


include/dt-bindings/pinctrl/rzg2l-pinctrl.h, for consistency?

> @@ -0,0 +1,16 @@

> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */

> +/*

> + * This header provides constants for Renesas RZ/G2{L,LC} pinctrl bindings.

> + *

> + * Copyright (C) 2021 Renesas Electronics Corp.

> + *

> + */

> +

> +#ifndef __DT_BINDINGS_PINCTRL_RZG2L_H

> +#define __DT_BINDINGS_PINCTRL_RZG2L_H


__DT_BINDINGS_RZG2L_PINCTRL_H

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
new file mode 100644
index 000000000000..e8ab5a0a46b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -0,0 +1,121 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L combined Pin and GPIO controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO
+  controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 8 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/pinctrl-rzg2l.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZG2L_GPIO(39, 1)" for P39_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength:
+          enum: [ 2, 4, 8, 12 ]
+        power-source:
+          enum: [ 1800, 2500, 3300 ]
+        slew-rate: true
+        gpio-hog: true
+        gpios: true
+        input-enable: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-rzg2l.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    pinctrl: pinctrl@11030000 {
+            compatible = "renesas,r9a07g044l-pinctrl";
+            reg = <0x11030000 0x10000>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 392>;
+            clocks = <&cpg CPG_MOD R9A07G044_CLK_GPIO>;
+            resets = <&cpg R9A07G044_CLK_GPIO>;
+            power-domains = <&cpg>;
+
+            scif0_pins: scif0 {
+                    groups = "scif0_data";
+                    function = "scif0";
+            };
+
+            sd1-pwr-en-hog {
+                    gpio-hog;
+                    gpios = <RZG2L_GPIO(39, 2) 0>;
+                    output-high;
+                    line-name = "sd1_pwr_en";
+            };
+    };
diff --git a/include/dt-bindings/pinctrl/pinctrl-rzg2l.h b/include/dt-bindings/pinctrl/pinctrl-rzg2l.h
new file mode 100644
index 000000000000..d285d9e8c60a
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-rzg2l.h
@@ -0,0 +1,16 @@ 
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * This header provides constants for Renesas RZ/G2{L,LC} pinctrl bindings.
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ *
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_RZG2L_H
+#define __DT_BINDINGS_PINCTRL_RZG2L_H
+
+#define RZG2L_PINS_PER_PORT	8
+
+#define RZG2L_GPIO(port, pos)	((port) * RZG2L_PINS_PER_PORT + (pos))
+
+#endif /* __DT_BINDINGS_PINCTRL_RZG2L_H */