@@ -87,7 +87,7 @@
#define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8)
#define AUART_LINECTRL_SPS (1 << 7)
#define AUART_LINECTRL_WLEN_MASK 0x00000060
-#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5)
+#define AUART_LINECTRL_WLEN(v) ((((v) - 5) & 0x3) << 5)
#define AUART_LINECTRL_FEN (1 << 4)
#define AUART_LINECTRL_STP2 (1 << 3)
#define AUART_LINECTRL_EPS (1 << 2)
@@ -973,16 +973,16 @@ static void mxs_auart_settermios(struct uart_port *u,
/* byte size */
switch (cflag & CSIZE) {
case CS5:
- bm = 0;
+ bm = 5;
break;
case CS6:
- bm = 1;
+ bm = 6;
break;
case CS7:
- bm = 2;
+ bm = 7;
break;
case CS8:
- bm = 3;
+ bm = 8;
break;
default:
return;
@@ -1403,7 +1403,7 @@ auart_console_get_options(struct mxs_auart_port *s, int *baud,
*parity = 'o';
}
- if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2))
+ if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(7))
*bits = 7;
else
*bits = 8;
It's a bit illogical to take magic constants in AUART_LINECTRL_WLEN. Like in auart_console_get_options(), 2 means 7 bits. Switch AUART_LINECTRL_WLEN to accept bit length, i.e. let it subtract 5 from the parameter before doing the logic. This will ease conversion from CSIZE to bits in mxs_auart_settermios() in the next patch. Signed-off-by: Jiri Slaby <jslaby@suse.cz> --- drivers/tty/serial/mxs-auart.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)