@@ -2660,7 +2660,6 @@ struct b53_device *b53_switch_alloc(struct device *base,
dev->priv = priv;
dev->ops = ops;
ds->ops = &b53_switch_ops;
- ds->untag_bridge_pvid = true;
dev->vlan_enabled = true;
/* Let DSA handle the case were multiple bridges span the same switch
* device and different VLAN awareness settings are requested, which
@@ -355,14 +355,6 @@ struct dsa_switch {
*/
bool configure_vlan_while_not_filtering;
- /* If the switch driver always programs the CPU port as egress tagged
- * despite the VLAN configuration indicating otherwise, then setting
- * @untag_bridge_pvid will force the DSA receive path to pop the bridge's
- * default_pvid VLAN tagged frames to offer a consistent behavior
- * between a vlan_filtering=0 and vlan_filtering=1 bridge device.
- */
- bool untag_bridge_pvid;
-
/* Let DSA manage the FDB entries towards the CPU, based on the
* software bridge database.
*/
@@ -260,15 +260,6 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
p = netdev_priv(skb->dev);
- if (unlikely(cpu_dp->ds->untag_bridge_pvid)) {
- nskb = dsa_untag_bridge_pvid(skb);
- if (!nskb) {
- kfree_skb(skb);
- return 0;
- }
- skb = nskb;
- }
-
dev_sw_netstats_rx_add(skb->dev, skb->len);
if (dsa_skb_defer_rx_timestamp(p, skb))
@@ -290,65 +290,6 @@ dsa_slave_to_master(const struct net_device *dev)
return dp->cpu_dp->master;
}
-/* If under a bridge with vlan_filtering=0, make sure to send pvid-tagged
- * frames as untagged, since the bridge will not untag them.
- */
-static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)
-{
- struct dsa_port *dp = dsa_slave_to_port(skb->dev);
- struct net_device *br = dp->bridge_dev;
- struct net_device *dev = skb->dev;
- struct net_device *upper_dev;
- u16 vid, pvid, proto;
- int err;
-
- if (!br || br_vlan_enabled(br))
- return skb;
-
- err = br_vlan_get_proto(br, &proto);
- if (err)
- return skb;
-
- /* Move VLAN tag from data to hwaccel */
- if (!skb_vlan_tag_present(skb) && skb->protocol == htons(proto)) {
- skb = skb_vlan_untag(skb);
- if (!skb)
- return NULL;
- }
-
- if (!skb_vlan_tag_present(skb))
- return skb;
-
- vid = skb_vlan_tag_get_id(skb);
-
- /* We already run under an RCU read-side critical section since
- * we are called from netif_receive_skb_list_internal().
- */
- err = br_vlan_get_pvid_rcu(dev, &pvid);
- if (err)
- return skb;
-
- if (vid != pvid)
- return skb;
-
- /* The sad part about attempting to untag from DSA is that we
- * don't know, unless we check, if the skb will end up in
- * the bridge's data path - br_allowed_ingress() - or not.
- * For example, there might be an 8021q upper for the
- * default_pvid of the bridge, which will steal VLAN-tagged traffic
- * from the bridge's data path. This is a configuration that DSA
- * supports because vlan_filtering is 0. In that case, we should
- * definitely keep the tag, to make sure it keeps working.
- */
- upper_dev = __vlan_find_dev_deep_rcu(br, htons(proto), vid);
- if (upper_dev)
- return skb;
-
- __vlan_hwaccel_clear_tag(skb);
-
- return skb;
-}
-
/* switch.c */
int dsa_switch_register_notifier(struct dsa_switch *ds);
void dsa_switch_unregister_notifier(struct dsa_switch *ds);
Now that the only user of the bridge PVID untagging code is no longer forcing the PVID untagged VLAN configuration to be PVID egress tagged for the CPU, we no longer need this support code to pop the VLAN tag automatically. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/b53/b53_common.c | 1 - include/net/dsa.h | 8 ----- net/dsa/dsa.c | 9 ----- net/dsa/dsa_priv.h | 59 -------------------------------- 4 files changed, 77 deletions(-)