diff mbox series

[net-next] net: phy: marvell: use phy_modify_changed() for marvell_set_polarity()

Message ID E1lomyE-0003mc-RP@rmk-PC.armlinux.org.uk
State New
Headers show
Series [net-next] net: phy: marvell: use phy_modify_changed() for marvell_set_polarity() | expand

Commit Message

Russell King (Oracle) June 3, 2021, 1:01 p.m. UTC 
Rather than open-coding the phy_modify_changed() sequence, use this
helper in marvell_set_polarity().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/marvell.c | 27 ++++++---------------------
 1 file changed, 6 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index e6721c1c26c2..23751d95855b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -367,39 +367,24 @@  static irqreturn_t marvell_handle_interrupt(struct phy_device *phydev)
 
 static int marvell_set_polarity(struct phy_device *phydev, int polarity)
 {
-	int reg;
-	int err;
-	int val;
-
-	/* get the current settings */
-	reg = phy_read(phydev, MII_M1011_PHY_SCR);
-	if (reg < 0)
-		return reg;
+	u16 val;
 
-	val = reg;
-	val &= ~MII_M1011_PHY_SCR_AUTO_CROSS;
 	switch (polarity) {
 	case ETH_TP_MDI:
-		val |= MII_M1011_PHY_SCR_MDI;
+		val = MII_M1011_PHY_SCR_MDI;
 		break;
 	case ETH_TP_MDI_X:
-		val |= MII_M1011_PHY_SCR_MDI_X;
+		val = MII_M1011_PHY_SCR_MDI_X;
 		break;
 	case ETH_TP_MDI_AUTO:
 	case ETH_TP_MDI_INVALID:
 	default:
-		val |= MII_M1011_PHY_SCR_AUTO_CROSS;
+		val = MII_M1011_PHY_SCR_AUTO_CROSS;
 		break;
 	}
 
-	if (val != reg) {
-		/* Set the new polarity value in the register */
-		err = phy_write(phydev, MII_M1011_PHY_SCR, val);
-		if (err)
-			return err;
-	}
-
-	return val != reg;
+	return phy_modify_changed(phydev, MII_M1011_PHY_SCR,
+				  MII_M1011_PHY_SCR_AUTO_CROSS, val);
 }
 
 static int marvell_config_aneg(struct phy_device *phydev)