| Message ID | 1425548783-13110-1-git-send-email-srinivas.kandagatla@linaro.org |
|---|---|
| State | New |
| Headers | show |
Thankyou for the comments, On 05/03/15 10:02, Paul Bolle wrote: > On Thu, 2015-03-05 at 09:46 +0000, Srinivas Kandagatla wrote: >> diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig >> index bff8ecb..65325c7 100644 >> --- a/drivers/eeprom/Kconfig >> +++ b/drivers/eeprom/Kconfig >> @@ -28,4 +28,11 @@ config EEPROM_SUNXI_SID >> This driver can also be built as a module. If so, the module >> will be called sunxi_sid. >> >> +config QCOM_QFPROM >> + tristate "QCOM QFPROM Support" >> + depends on EEPROM > > Make this one tab, please. > >> + select REGMAP_MMIO >> + help >> + Say y here to enable QFPROM support. The QFPROM provides access >> + functions for QFPROM data to rest of the drivers via eeprom interface. > > And this one tab and two spaces, please. > > All utterly trivial, of course, but I found a less trivial problem with > this patch, so I included these two comments anyway. > Will fix it in next version. >> endif >> diff --git a/drivers/eeprom/Makefile b/drivers/eeprom/Makefile >> index 661422c..f99c824 100644 >> --- a/drivers/eeprom/Makefile >> +++ b/drivers/eeprom/Makefile >> @@ -8,3 +8,4 @@ obj-$(CONFIG_EEPROM) += core.o >> >> # Devices >> obj-$(CONFIG_EEPROM_SUNXI_SID) += eeprom-sunxi-sid.o >> +obj-$(CONFIG_QCOM_QFPROM) += qfprom.o >> diff --git a/drivers/eeprom/qfprom.c b/drivers/eeprom/qfprom.c >> new file mode 100644 >> index 0000000..371a8c0 >> --- /dev/null >> +++ b/drivers/eeprom/qfprom.c >> @@ -0,0 +1,74 @@ >> +#include <linux/device.h> >> +#include <linux/module.h> >> +#include <linux/err.h> >> +#include <linux/of.h> >> +#include <linux/platform_device.h> >> +#include <linux/eeprom-provider.h> > > [...] > >> +MODULE_LICENSE("GPL2"); > > This will taint the kernel on module load. I guess you meant > MODULE_LICENSE("GPL v2"); > > but there's no comment with some lines about the license at the top of > this file, so I can't be sure. > Yes, I meant GPL v2, and will fix the license header too in next version. --srini > > Paul Bolle > > (Chances are that by the end of this week everybody is so tired of > messages like this that people actually check this stuff before > submitting, and there's no need to review this anymore for the rest of > this year. That would be mission accomplished, I guess.) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig index bff8ecb..65325c7 100644 --- a/drivers/eeprom/Kconfig +++ b/drivers/eeprom/Kconfig @@ -28,4 +28,11 @@ config EEPROM_SUNXI_SID This driver can also be built as a module. If so, the module will be called sunxi_sid. +config QCOM_QFPROM + tristate "QCOM QFPROM Support" + depends on EEPROM + select REGMAP_MMIO + help + Say y here to enable QFPROM support. The QFPROM provides access + functions for QFPROM data to rest of the drivers via eeprom interface. endif diff --git a/drivers/eeprom/Makefile b/drivers/eeprom/Makefile index 661422c..f99c824 100644 --- a/drivers/eeprom/Makefile +++ b/drivers/eeprom/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_EEPROM) += core.o # Devices obj-$(CONFIG_EEPROM_SUNXI_SID) += eeprom-sunxi-sid.o +obj-$(CONFIG_QCOM_QFPROM) += qfprom.o diff --git a/drivers/eeprom/qfprom.c b/drivers/eeprom/qfprom.c new file mode 100644 index 0000000..371a8c0 --- /dev/null +++ b/drivers/eeprom/qfprom.c @@ -0,0 +1,74 @@ +#include <linux/device.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/eeprom-provider.h> + +static struct regmap_config qfprom_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, +}; + +static struct eeprom_config econfig = { + .stride = 1, + .name = "qfprom", +}; + +static int qfprom_remove(struct platform_device *pdev) +{ + struct eeprom_device *eeprom = platform_get_drvdata(pdev); + + return eeprom_unregister(eeprom); +} + +static int qfprom_probe(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + struct device *dev = &pdev->dev; + struct eeprom_device *eeprom; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + qfprom_regmap_config.max_register = resource_size(res) - 1; + + econfig.regmap = devm_regmap_init_mmio(dev, base, + &qfprom_regmap_config); + if (IS_ERR(econfig.regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(econfig.regmap); + } + econfig.owner = THIS_MODULE; + econfig.dev = dev; + econfig.size = resource_size(res) - 1; + eeprom = eeprom_register(&econfig); + if (IS_ERR(eeprom)) + return PTR_ERR(eeprom); + + platform_set_drvdata(pdev, eeprom); + return 0; +} + +static const struct of_device_id qfprom_of_match[] = { + { .compatible = "qcom,qfprom"}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, qfprom_of_match); + +static struct platform_driver qfprom_driver = { + .probe = qfprom_probe, + .remove = qfprom_remove, + .driver = { + .name = "qcom,qfprom", + .of_match_table = qfprom_of_match, + }, +}; +module_platform_driver(qfprom_driver); +MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>"); +MODULE_DESCRIPTION("Qualcomm QFPROM driver"); +MODULE_LICENSE("GPL2");
This patch adds QFPROM support driver which is used by other drivers like thermal sensor and cpufreq. On MSM parts there are some efuses (called qfprom) these fuses store things like calibration data, speed bins.. etc. Drivers like cpufreq, thermal sensors would read out this data for configuring the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/eeprom/Kconfig | 7 +++++ drivers/eeprom/Makefile | 1 + drivers/eeprom/qfprom.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 82 insertions(+) create mode 100644 drivers/eeprom/qfprom.c