diff mbox series

[1/2] Bluetooth: btrtl: rename USB fw for RTL8761

Message ID 20210528152645.25577-1-joakim.tjernlund@infinera.com
State Accepted
Commit beb1dd87ab58f0d9e67d317e228a2502259d6d75
Headers show
Series [1/2] Bluetooth: btrtl: rename USB fw for RTL8761 | expand

Commit Message

Joakim Tjernlund May 28, 2021, 3:26 p.m. UTC 
From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>

According Realteks own BT drivers firmware RTL8761B is for UART
and RTL8761BU is for USB.

Change existing 8761B to UART and add an 8761BU entry for USB

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
---
 drivers/bluetooth/btrtl.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

Comments

Marcel Holtmann June 2, 2021, 7:50 p.m. UTC | #1 
Hi Joakim,

> According Realteks own BT drivers firmware RTL8761B is for UART
> and RTL8761BU is for USB.
> 
> Change existing 8761B to UART and add an 8761BU entry for USB
> 
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> ---
> drivers/bluetooth/btrtl.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel
diff mbox series

Patch

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index e7fe5fb22753..ccef8b2cfee2 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -132,12 +132,19 @@  static const struct id_table ic_id_table[] = {
 	  .cfg_name = "rtl_bt/rtl8761a_config" },
 
 	/* 8761B */
-	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .fw_name  = "rtl_bt/rtl8761b_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8761b_config" },
 
+	/* 8761BU */
+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8761bu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8761bu_config" },
+
 	/* 8822C with UART interface */
 	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
 	  .config_needed = true,