diff mbox series

[1/3] dt-bindings: watchdog: sama5d4-wdt: convert to yaml

Message ID 20210527100120.266796-1-eugen.hristev@microchip.com
State Accepted
Commit 13b191692d917b62d50c3956ed9c6ef3d0fbb001
Headers show
Series [1/3] dt-bindings: watchdog: sama5d4-wdt: convert to yaml | expand

Commit Message

Eugen Hristev May 27, 2021, 10:01 a.m. UTC 
Convert the old txt binding to yaml format.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
 .../bindings/watchdog/atmel,sama5d4-wdt.yaml  | 73 +++++++++++++++++++
 .../bindings/watchdog/atmel-sama5d4-wdt.txt   | 34 ---------
 2 files changed, 73 insertions(+), 34 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
 delete mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

Comments

Rob Herring June 4, 2021, 8:20 p.m. UTC | #1 
On Thu, 27 May 2021 13:01:18 +0300, Eugen Hristev wrote:
> Convert the old txt binding to yaml format.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
>  .../bindings/watchdog/atmel,sama5d4-wdt.yaml  | 73 +++++++++++++++++++
>  .../bindings/watchdog/atmel-sama5d4-wdt.txt   | 34 ---------
>  2 files changed, 73 insertions(+), 34 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Nicolas Ferre June 6, 2021, 4:52 p.m. UTC | #2 
On 27/05/2021 at 12:01, Eugen Hristev wrote:
> Convert the old txt binding to yaml format.

> 

> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>


Series queued on at91-dt for 5.14. Will be sent to arm-soc soon.
Thanks, best regards,
   Nicolas

> ---

>   .../bindings/watchdog/atmel,sama5d4-wdt.yaml  | 73 +++++++++++++++++++

>   .../bindings/watchdog/atmel-sama5d4-wdt.txt   | 34 ---------

>   2 files changed, 73 insertions(+), 34 deletions(-)

>   create mode 100644 Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml

>   delete mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

> 

> diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml

> new file mode 100644

> index 000000000000..0d0ab81da040

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml

> @@ -0,0 +1,73 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller

> +

> +maintainers:

> +  - Eugen Hristev <eugen.hristev@microchip.com>

> +

> +allOf:

> +  - $ref: "watchdog.yaml#"

> +

> +properties:

> +  compatible:

> +    enum:

> +      - atmel,sama5d4-wdt

> +      - microchip,sam9x60-wdt

> +

> +  reg:

> +    maxItems: 1

> +

> +  atmel,watchdog-type:

> +    $ref: /schemas/types.yaml#/definitions/string

> +    description: should be hardware or software.

> +    oneOf:

> +      - description:

> +          Enable watchdog fault reset. A watchdog fault triggers

> +          watchdog reset.

> +        const: hardware

> +      - description:

> +          Enable watchdog fault interrupt. A watchdog fault asserts

> +          watchdog interrupt.

> +        const: software

> +    default: hardware

> +

> +  atmel,idle-halt:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: |

> +      present if you want to stop the watchdog when the CPU is in idle state.

> +      CAUTION: This property should be used with care, it actually makes the

> +      watchdog not counting when the CPU is in idle state, therefore the

> +      watchdog reset time depends on mean CPU usage and will not reset at all

> +      if the CPU stop working while it is in idle state, which is probably

> +      not what you want.

> +

> +  atmel,dbg-halt:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: |

> +      present if you want to stop the watchdog when the CPU is in debug state.

> +

> +required:

> +  - compatible

> +  - reg

> +

> +unevaluatedProperties: false

> +

> +examples:

> +  - |

> +    #include <dt-bindings/interrupt-controller/irq.h>

> +

> +    watchdog@fc068640 {

> +      compatible = "atmel,sama5d4-wdt";

> +      reg = <0xfc068640 0x10>;

> +      interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;

> +      timeout-sec = <10>;

> +      atmel,watchdog-type = "hardware";

> +      atmel,dbg-halt;

> +      atmel,idle-halt;

> +    };

> +

> +...

> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

> deleted file mode 100644

> index 44727fcc2729..000000000000

> --- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

> +++ /dev/null

> @@ -1,34 +0,0 @@

> -* Atmel SAMA5D4 Watchdog Timer (WDT) Controller

> -

> -Required properties:

> -- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"

> -- reg: base physical address and length of memory mapped region.

> -

> -Optional properties:

> -- timeout-sec: watchdog timeout value (in seconds).

> -- interrupts: interrupt number to the CPU.

> -- atmel,watchdog-type: should be "hardware" or "software".

> -	"hardware": enable watchdog fault reset. A watchdog fault triggers

> -		    watchdog reset.

> -	"software": enable watchdog fault interrupt. A watchdog fault asserts

> -		    watchdog interrupt.

> -- atmel,idle-halt: present if you want to stop the watchdog when the CPU is

> -		   in idle state.

> -	CAUTION: This property should be used with care, it actually makes the

> -	watchdog not counting when the CPU is in idle state, therefore the

> -	watchdog reset time depends on mean CPU usage and will not reset at all

> -	if the CPU stop working while it is in idle state, which is probably

> -	not what you want.

> -- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is

> -		  in debug state.

> -

> -Example:

> -	watchdog@fc068640 {

> -		compatible = "atmel,sama5d4-wdt";

> -		reg = <0xfc068640 0x10>;

> -		interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;

> -		timeout-sec = <10>;

> -		atmel,watchdog-type = "hardware";

> -		atmel,dbg-halt;

> -		atmel,idle-halt;

> -	};

> 



-- 
Nicolas Ferre
Nicolas Ferre June 11, 2021, 12:19 p.m. UTC | #3 
On 06/06/2021 at 18:52, Nicolas Ferre wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

> 

> On 27/05/2021 at 12:01, Eugen Hristev wrote:

>> Convert the old txt binding to yaml format.

>>

>> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>

> 

> Series queued on at91-dt for 5.14. Will be sent to arm-soc soon.


Please ignore this comment which has no meaning as all the content of 
this series must progress with the "watchdog" tree and not at91->arm-soc!

Sorry for the noise and confusion. I'm removing the patches from at91-dt 
right now.

Best regards,
   Nicolas

>> ---

>>    .../bindings/watchdog/atmel,sama5d4-wdt.yaml  | 73 +++++++++++++++++++

>>    .../bindings/watchdog/atmel-sama5d4-wdt.txt   | 34 ---------

>>    2 files changed, 73 insertions(+), 34 deletions(-)

>>    create mode 100644 Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml

>>    delete mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

>>

>> diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml

>> new file mode 100644

>> index 000000000000..0d0ab81da040

>> --- /dev/null

>> +++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml

>> @@ -0,0 +1,73 @@

>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

>> +%YAML 1.2

>> +---

>> +$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#

>> +$schema: http://devicetree.org/meta-schemas/core.yaml#

>> +

>> +title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller

>> +

>> +maintainers:

>> +  - Eugen Hristev <eugen.hristev@microchip.com>

>> +

>> +allOf:

>> +  - $ref: "watchdog.yaml#"

>> +

>> +properties:

>> +  compatible:

>> +    enum:

>> +      - atmel,sama5d4-wdt

>> +      - microchip,sam9x60-wdt

>> +

>> +  reg:

>> +    maxItems: 1

>> +

>> +  atmel,watchdog-type:

>> +    $ref: /schemas/types.yaml#/definitions/string

>> +    description: should be hardware or software.

>> +    oneOf:

>> +      - description:

>> +          Enable watchdog fault reset. A watchdog fault triggers

>> +          watchdog reset.

>> +        const: hardware

>> +      - description:

>> +          Enable watchdog fault interrupt. A watchdog fault asserts

>> +          watchdog interrupt.

>> +        const: software

>> +    default: hardware

>> +

>> +  atmel,idle-halt:

>> +    $ref: /schemas/types.yaml#/definitions/flag

>> +    description: |

>> +      present if you want to stop the watchdog when the CPU is in idle state.

>> +      CAUTION: This property should be used with care, it actually makes the

>> +      watchdog not counting when the CPU is in idle state, therefore the

>> +      watchdog reset time depends on mean CPU usage and will not reset at all

>> +      if the CPU stop working while it is in idle state, which is probably

>> +      not what you want.

>> +

>> +  atmel,dbg-halt:

>> +    $ref: /schemas/types.yaml#/definitions/flag

>> +    description: |

>> +      present if you want to stop the watchdog when the CPU is in debug state.

>> +

>> +required:

>> +  - compatible

>> +  - reg

>> +

>> +unevaluatedProperties: false

>> +

>> +examples:

>> +  - |

>> +    #include <dt-bindings/interrupt-controller/irq.h>

>> +

>> +    watchdog@fc068640 {

>> +      compatible = "atmel,sama5d4-wdt";

>> +      reg = <0xfc068640 0x10>;

>> +      interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;

>> +      timeout-sec = <10>;

>> +      atmel,watchdog-type = "hardware";

>> +      atmel,dbg-halt;

>> +      atmel,idle-halt;

>> +    };

>> +

>> +...

>> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

>> deleted file mode 100644

>> index 44727fcc2729..000000000000

>> --- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

>> +++ /dev/null

>> @@ -1,34 +0,0 @@

>> -* Atmel SAMA5D4 Watchdog Timer (WDT) Controller

>> -

>> -Required properties:

>> -- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"

>> -- reg: base physical address and length of memory mapped region.

>> -

>> -Optional properties:

>> -- timeout-sec: watchdog timeout value (in seconds).

>> -- interrupts: interrupt number to the CPU.

>> -- atmel,watchdog-type: should be "hardware" or "software".

>> -     "hardware": enable watchdog fault reset. A watchdog fault triggers

>> -                 watchdog reset.

>> -     "software": enable watchdog fault interrupt. A watchdog fault asserts

>> -                 watchdog interrupt.

>> -- atmel,idle-halt: present if you want to stop the watchdog when the CPU is

>> -                in idle state.

>> -     CAUTION: This property should be used with care, it actually makes the

>> -     watchdog not counting when the CPU is in idle state, therefore the

>> -     watchdog reset time depends on mean CPU usage and will not reset at all

>> -     if the CPU stop working while it is in idle state, which is probably

>> -     not what you want.

>> -- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is

>> -               in debug state.

>> -

>> -Example:

>> -     watchdog@fc068640 {

>> -             compatible = "atmel,sama5d4-wdt";

>> -             reg = <0xfc068640 0x10>;

>> -             interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;

>> -             timeout-sec = <10>;

>> -             atmel,watchdog-type = "hardware";

>> -             atmel,dbg-halt;

>> -             atmel,idle-halt;

>> -     };

>>

> 

> 

> --

> Nicolas Ferre

> 

> _______________________________________________

> linux-arm-kernel mailing list

> linux-arm-kernel@lists.infradead.org

> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

> 



-- 
Nicolas Ferre
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
new file mode 100644
index 000000000000..0d0ab81da040
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d4-wdt
+      - microchip,sam9x60-wdt
+
+  reg:
+    maxItems: 1
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: should be hardware or software.
+    oneOf:
+      - description:
+          Enable watchdog fault reset. A watchdog fault triggers
+          watchdog reset.
+        const: hardware
+      - description:
+          Enable watchdog fault interrupt. A watchdog fault asserts
+          watchdog interrupt.
+        const: software
+    default: hardware
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stop working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in debug state.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fc068640 {
+      compatible = "atmel,sama5d4-wdt";
+      reg = <0xfc068640 0x10>;
+      interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+      timeout-sec = <10>;
+      atmel,watchdog-type = "hardware";
+      atmel,dbg-halt;
+      atmel,idle-halt;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
deleted file mode 100644
index 44727fcc2729..000000000000
--- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
+++ /dev/null
@@ -1,34 +0,0 @@ 
-* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"
-- reg: base physical address and length of memory mapped region.
-
-Optional properties:
-- timeout-sec: watchdog timeout value (in seconds).
-- interrupts: interrupt number to the CPU.
-- atmel,watchdog-type: should be "hardware" or "software".
-	"hardware": enable watchdog fault reset. A watchdog fault triggers
-		    watchdog reset.
-	"software": enable watchdog fault interrupt. A watchdog fault asserts
-		    watchdog interrupt.
-- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
-		   in idle state.
-	CAUTION: This property should be used with care, it actually makes the
-	watchdog not counting when the CPU is in idle state, therefore the
-	watchdog reset time depends on mean CPU usage and will not reset at all
-	if the CPU stop working while it is in idle state, which is probably
-	not what you want.
-- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
-		  in debug state.
-
-Example:
-	watchdog@fc068640 {
-		compatible = "atmel,sama5d4-wdt";
-		reg = <0xfc068640 0x10>;
-		interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
-		timeout-sec = <10>;
-		atmel,watchdog-type = "hardware";
-		atmel,dbg-halt;
-		atmel,idle-halt;
-	};