deleted file mode 100644
@@ -1,32 +0,0 @@
-Device tree configuration for Renesas RIIC driver
-
-Required properties:
-- compatible :
- "renesas,riic-r7s72100" if the device is a part of a R7S72100 SoC.
- "renesas,riic-r7s9210" if the device is a part of a R7S9210 SoC.
- "renesas,riic-rz" for a generic RZ/A compatible device.
-- reg : address start and address range size of device
-- interrupts : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI)
-- clock-frequency : frequency of bus clock in Hz
-- #address-cells : should be <1>
-- #size-cells : should be <0>
-
-Pinctrl properties might be needed, too. See there.
-
-Example:
-
- i2c0: i2c@fcfee000 {
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee000 0x44>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
- <0 158 IRQ_TYPE_EDGE_RISING>,
- <0 159 IRQ_TYPE_EDGE_RISING>,
- <0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 164 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <100000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
new file mode 100644
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,riic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A I2C Bus Interface (RIIC)
+
+maintainers:
+ - Chris Brandt <chris.brandt@renesas.com>
+ - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,riic-r7s72100 # RZ/A1H
+ - renesas,riic-r7s9210 # RZ/A2M
+ - const: renesas,riic-rz # RZ/A
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Transmit End Interrupt (TEI)
+ - description: Receive Data Full Interrupt (RI)
+ - description: Transmit Data Empty Interrupt (TI)
+ - description: Stop Condition Detection Interrupt (SPI)
+ - description: Start Condition Detection Interrupt (STI)
+ - description: NACK Reception Interrupt (NAKI)
+ - description: Arbitration-Lost Interrupt (ALI)
+ - description: Timeout Interrupt (TMOI)
+
+ clock-frequency:
+ description:
+ Desired I2C bus clock frequency in Hz. The absence of this property
+ indicates the default frequency 100 kHz.
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-frequency
+ - power-domains
+ - '#address-cells'
+ - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r7s72100-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c0: i2c@fcfee000 {
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+ clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
@@ -15641,7 +15641,7 @@ F: drivers/thermal/rcar_thermal.c
RENESAS RIIC DRIVER
M: Chris Brandt <chris.brandt@renesas.com>
S: Supported
-F: Documentation/devicetree/bindings/i2c/renesas,riic.txt
+F: Documentation/devicetree/bindings/i2c/renesas,riic.yaml
F: drivers/i2c/busses/i2c-riic.c
RENESAS USB PHY DRIVER