| Message ID | 20210528114345.543761-1-vincent.knecht@mailoo.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v1] arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreen | expand |
On Fri, May 28, 2021 at 01:43:45PM +0200, Vincent Knecht wrote: > Enable the MStar msg2638 touchscreen. > > Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Thanks! Stephan > --- > .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts > index 540b1fa4b260..670bd1bebd73 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts > @@ -45,6 +45,24 @@ &blsp1_uart2 { > status = "okay"; > }; > > +&blsp_i2c4 { > + status = "okay"; > + > + touchscreen@26 { > + compatible = "mstar,msg2638"; > + reg = <0x26>; > + interrupt-parent = <&msmgpio>; > + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; > + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ts_int_reset_default>; > + vdd-supply = <&pm8916_l17>; > + vddio-supply = <&pm8916_l5>; > + touchscreen-size-x = <2048>; > + touchscreen-size-y = <2048>; > + }; > +}; > + > &blsp_i2c5 { > status = "okay"; > > @@ -281,6 +299,14 @@ proximity_int_default: proximity-int-default { > bias-pull-up; > }; > > + ts_int_reset_default: ts-int-reset-default { > + pins = "gpio13", "gpio100"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-disable; > + }; > + > usb_id_default: usb-id-default { > pins = "gpio69"; > function = "gpio"; > -- > 2.31.1 > > >
Hello: This patch was applied to qcom/linux.git (refs/heads/for-next): On Fri, 28 May 2021 13:43:45 +0200 you wrote: > Enable the MStar msg2638 touchscreen. > > Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> > --- > .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) Here is the summary with links: - [v1] arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreen https://git.kernel.org/qcom/c/15c5a08c8427 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 540b1fa4b260..670bd1bebd73 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -45,6 +45,24 @@ &blsp1_uart2 { status = "okay"; }; +&blsp_i2c4 { + status = "okay"; + + touchscreen@26 { + compatible = "mstar,msg2638"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <2048>; + touchscreen-size-y = <2048>; + }; +}; + &blsp_i2c5 { status = "okay"; @@ -281,6 +299,14 @@ proximity_int_default: proximity-int-default { bias-pull-up; }; + ts_int_reset_default: ts-int-reset-default { + pins = "gpio13", "gpio100"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default { pins = "gpio69"; function = "gpio";
Enable the MStar msg2638 touchscreen. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> --- .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)