new file mode 100644
@@ -0,0 +1,367 @@
+/** @file
+
+ Driver for the virtual Xen PCI device
+
+ Copyright (C) 2012, Red Hat, Inc.
+ Copyright (c) 2012, Intel Corporation. All rights reserved.<BR>
+ Copyright (C) 2013, ARM Ltd.
+ Copyright (C) 2015, Linaro Ltd.
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+ WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/Pci.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Protocol/PciIo.h>
+#include <Protocol/XenIo.h>
+
+#define PCI_VENDOR_ID_XEN 0x5853
+#define PCI_DEVICE_ID_XEN_PLATFORM 0x0001
+
+/**
+
+ Device probe function for this driver.
+
+ The DXE core calls this function for any given device in order to see if the
+ driver can drive the device.
+
+ @param[in] This The EFI_DRIVER_BINDING_PROTOCOL object
+ incorporating this driver (independently of
+ any device).
+
+ @param[in] DeviceHandle The device to probe.
+
+ @param[in] RemainingDevicePath Relevant only for bus drivers, ignored.
+
+
+ @retval EFI_SUCCESS The driver supports the device being probed.
+
+ @retval EFI_UNSUPPORTED The driver does not support the device being probed.
+
+ @return Error codes from the OpenProtocol() boot service or
+ the PciIo protocol.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+XenIoPciDeviceBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE DeviceHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PCI_TYPE00 Pci;
+
+ //
+ // Attempt to open the device with the PciIo set of interfaces. On success,
+ // the protocol is "instantiated" for the PCI device. Covers duplicate open
+ // attempts (EFI_ALREADY_STARTED).
+ //
+ Status = gBS->OpenProtocol (
+ DeviceHandle, // candidate device
+ &gEfiPciIoProtocolGuid, // for generic PCI access
+ (VOID **)&PciIo, // handle to instantiate
+ This->DriverBindingHandle, // requestor driver identity
+ DeviceHandle, // ControllerHandle, according to
+ // the UEFI Driver Model
+ EFI_OPEN_PROTOCOL_BY_DRIVER // get exclusive PciIo access to
+ // the device; to be released
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Read entire PCI configuration header for more extensive check ahead.
+ //
+ Status = PciIo->Pci.Read (
+ PciIo, // (protocol, device)
+ // handle
+ EfiPciIoWidthUint32, // access width & copy
+ // mode
+ 0, // Offset
+ sizeof Pci / sizeof (UINT32), // Count
+ &Pci // target buffer
+ );
+
+ if (Status == EFI_SUCCESS) {
+ if ((Pci.Hdr.VendorId == PCI_VENDOR_ID_XEN) &&
+ (Pci.Hdr.DeviceId == PCI_DEVICE_ID_XEN_PLATFORM)) {
+ Status = EFI_SUCCESS;
+ } else {
+ Status = EFI_UNSUPPORTED;
+ }
+ }
+
+ //
+ // We needed PCI IO access only transitorily, to see whether we support the
+ // device or not.
+ //
+ gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle, DeviceHandle);
+
+ return Status;
+}
+
+/**
+
+ After we've pronounced support for a specific device in
+ DriverBindingSupported(), we start managing said device (passed in by the
+ Driver Exeuction Environment) with the following service.
+
+ See DriverBindingSupported() for specification references.
+
+ @param[in] This The EFI_DRIVER_BINDING_PROTOCOL object
+ incorporating this driver (independently of
+ any device).
+
+ @param[in] DeviceHandle The supported device to drive.
+
+ @param[in] RemainingDevicePath Relevant only for bus drivers, ignored.
+
+
+ @retval EFI_SUCCESS The device was started.
+
+ @retval EFI_OUT_OF_RESOURCES Memory allocation failed.
+
+ @return Error codes from the OpenProtocol() boot
+ service, the PciIo protocol or the
+ InstallProtocolInterface() boot service.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+XenIoPciDeviceBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE DeviceHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ XENIO_PROTOCOL *XenIo;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *BarDesc;
+
+ XenIo = (XENIO_PROTOCOL *) AllocateZeroPool (sizeof *XenIo);
+ if (XenIo == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Status = gBS->OpenProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,
+ (VOID **)&PciIo, This->DriverBindingHandle,
+ DeviceHandle, EFI_OPEN_PROTOCOL_BY_DRIVER);
+ if (EFI_ERROR (Status)) {
+ goto FreeXenIo;
+ }
+
+ //
+ // The BAR1 of this PCI device is used for shared memory and is supposed to
+ // look like MMIO. The address space of the BAR1 will be used to map the
+ // Grant Table.
+ //
+ Status = PciIo->GetBarAttributes (PciIo, PCI_BAR_IDX1, NULL, (VOID**) &BarDesc);
+ ASSERT_EFI_ERROR (Status);
+ ASSERT (BarDesc->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM);
+
+ /* Get a Memory address for mapping the Grant Table. */
+ DEBUG ((EFI_D_INFO, "XenIoPci: BAR at %LX\n", BarDesc->AddrRangeMin));
+ XenIo->GrantTableAddress = BarDesc->AddrRangeMin;
+ FreePool (BarDesc);
+
+ Status = gBS->InstallProtocolInterface (&DeviceHandle,
+ &gXenIoProtocolGuid, EFI_NATIVE_INTERFACE, XenIo);
+
+ if (!EFI_ERROR (Status)) {
+ return EFI_SUCCESS;
+ }
+
+ gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle, DeviceHandle);
+
+FreeXenIo:
+ FreePool (XenIo);
+
+ return Status;
+}
+
+/**
+
+ Stop driving the XenIo PCI device
+
+ @param[in] This The EFI_DRIVER_BINDING_PROTOCOL object
+ incorporating this driver (independently of any
+ device).
+
+ @param[in] DeviceHandle Stop driving this device.
+
+ @param[in] NumberOfChildren Since this function belongs to a device driver
+ only (as opposed to a bus driver), the caller
+ environment sets NumberOfChildren to zero, and
+ we ignore it.
+
+ @param[in] ChildHandleBuffer Ignored (corresponding to NumberOfChildren).
+
+ @retval EFI_SUCCESS Driver instance has been stopped and the PCI
+ configuration attributes have been restored.
+
+ @return Error codes from the OpenProtocol() or
+ CloseProtocol(), UninstallProtocolInterface()
+ boot services.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+XenIoPciDeviceBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE DeviceHandle,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ XENIO_PROTOCOL *XenIo;
+
+ Status = gBS->OpenProtocol (
+ DeviceHandle, // candidate device
+ &gXenIoProtocolGuid, // retrieve the XenIo iface
+ (VOID **)&XenIo, // target pointer
+ This->DriverBindingHandle, // requestor driver identity
+ DeviceHandle, // requesting lookup for dev.
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL // lookup only, no ref. added
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Handle Stop() requests for in-use driver instances gracefully.
+ //
+ Status = gBS->UninstallProtocolInterface (DeviceHandle,
+ &gXenIoProtocolGuid, XenIo);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle, DeviceHandle);
+
+ FreePool (XenIo);
+
+ return Status;
+}
+
+
+//
+// The static object that groups the Supported() (ie. probe), Start() and
+// Stop() functions of the driver together. Refer to UEFI Spec 2.3.1 + Errata
+// C, 10.1 EFI Driver Binding Protocol.
+//
+STATIC EFI_DRIVER_BINDING_PROTOCOL gDriverBinding = {
+ &XenIoPciDeviceBindingSupported,
+ &XenIoPciDeviceBindingStart,
+ &XenIoPciDeviceBindingStop,
+ 0x10, // Version, must be in [0x10 .. 0xFFFFFFEF] for IHV-developed drivers
+ NULL, // ImageHandle, to be overwritten by
+ // EfiLibInstallDriverBindingComponentName2() in XenIoPciDeviceEntryPoint()
+ NULL // DriverBindingHandle, ditto
+};
+
+
+//
+// The purpose of the following scaffolding (EFI_COMPONENT_NAME_PROTOCOL and
+// EFI_COMPONENT_NAME2_PROTOCOL implementation) is to format the driver's name
+// in English, for display on standard console devices. This is recommended for
+// UEFI drivers that follow the UEFI Driver Model. Refer to the Driver Writer's
+// Guide for UEFI 2.3.1 v1.01, 11 UEFI Driver and Controller Names.
+//
+STATIC
+EFI_UNICODE_STRING_TABLE mDriverNameTable[] = {
+ { "eng;en", L"XenIo PCI Driver" },
+ { NULL, NULL }
+};
+
+STATIC
+EFI_COMPONENT_NAME_PROTOCOL gComponentName;
+
+EFI_STATUS
+EFIAPI
+XenIoPciGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mDriverNameTable,
+ DriverName,
+ (BOOLEAN)(This == &gComponentName) // Iso639Language
+ );
+}
+
+EFI_STATUS
+EFIAPI
+XenIoPciGetDeviceName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE DeviceHandle,
+ IN EFI_HANDLE ChildHandle,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_COMPONENT_NAME_PROTOCOL gComponentName = {
+ &XenIoPciGetDriverName,
+ &XenIoPciGetDeviceName,
+ "eng" // SupportedLanguages, ISO 639-2 language codes
+};
+
+STATIC
+EFI_COMPONENT_NAME2_PROTOCOL gComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) &XenIoPciGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) &XenIoPciGetDeviceName,
+ "en" // SupportedLanguages, RFC 4646 language codes
+};
+
+
+//
+// Entry point of this driver.
+//
+EFI_STATUS
+EFIAPI
+XenIoPciDeviceEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ return EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gDriverBinding,
+ ImageHandle,
+ &gComponentName,
+ &gComponentName2
+ );
+}
new file mode 100644
@@ -0,0 +1,45 @@
+## @file
+# Driver for the virtual Xen PCI device
+#
+# Copyright (C) 2015, Linaro Ltd.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = XenIoPciDxe
+ FILE_GUID = cf569f50-de44-4f54-b4d7-f4ae25cda599
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = XenIoPciDeviceEntryPoint
+
+[Packages]
+ MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[Sources]
+ XenIoPciDxe.c
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ UefiBootServicesTableLib
+ MemoryAllocationLib
+ BaseMemoryLib
+ BaseLib
+ UefiLib
+ DebugLib
+
+[Protocols]
+ gEfiDriverBindingProtocolGuid
+ gEfiPciIoProtocolGuid
+ gEfiComponentName2ProtocolGuid
+ gEfiComponentNameProtocolGuid
+ gXenIoProtocolGuid