diff mbox series

[4.14,286/323] usb: dwc3: omap: improve extcon initialization

Message ID 20210520092130.022895967@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH May 20, 2021, 9:22 a.m. UTC
From: Marcel Hamer <marcel@solidxs.se>

commit e17b02d4970913233d543c79c9c66e72cac05bdd upstream.

When extcon is used in combination with dwc3, it is assumed that the dwc3
registers are untouched and as such are only configured if VBUS is valid
or ID is tied to ground.

In case VBUS is not valid or ID is floating, the registers are not
configured as such during driver initialization, causing a wrong
default state during boot.

If the registers are not in a default state, because they are for
instance touched by a boot loader, this can cause for a kernel error.

Signed-off-by: Marcel Hamer <marcel@solidxs.se>
Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/dwc3-omap.c |    5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -440,8 +440,13 @@  static int dwc3_omap_extcon_register(str
 
 		if (extcon_get_state(edev, EXTCON_USB) == true)
 			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+		else
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
 		if (extcon_get_state(edev, EXTCON_USB_HOST) == true)
 			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+		else
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
 
 		omap->edev = edev;
 	}