diff mbox series

[v6,04/24] mpi3mr: add support of queue command processing

Message ID 20210520152545.2710479-5-kashyap.desai@broadcom.com
State New
Headers show
Series Introducing mpi3mr driver | expand

Commit Message

Kashyap Desai May 20, 2021, 3:25 p.m. UTC
Send Port Enable Request to FW for Device Discovery.
As part of port enable completion driver calls scan_start and
scan_finished hooks.
scsi layer reference like sdev, starget etc is added but actual
device discovery will be supported once driver add complete event
process handling (It is added in subsequent patches)

This patch provides interface which is used to interact with FW
via operational queue pairs.

Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>

Cc: sathya.prakash@broadcom.com
Cc: hare@suse.de
---
 drivers/scsi/mpi3mr/mpi3mr.h    |  51 +++
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 244 ++++++++++++
 drivers/scsi/mpi3mr/mpi3mr_os.c | 634 +++++++++++++++++++++++++++++++-
 3 files changed, 927 insertions(+), 2 deletions(-)

Comments

Hannes Reinecke June 1, 2021, 1:30 p.m. UTC | #1
On 5/20/21 5:25 PM, Kashyap Desai wrote:
> Send Port Enable Request to FW for Device Discovery.

> As part of port enable completion driver calls scan_start and

> scan_finished hooks.

> scsi layer reference like sdev, starget etc is added but actual

> device discovery will be supported once driver add complete event

> process handling (It is added in subsequent patches)

> 

> This patch provides interface which is used to interact with FW

> via operational queue pairs.

> 

> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>

> Reviewed-by: Tomas Henzl <thenzl@redhat.com>

> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>

> 

> Cc: sathya.prakash@broadcom.com

> Cc: hare@suse.de

> ---

>  drivers/scsi/mpi3mr/mpi3mr.h    |  51 +++

>  drivers/scsi/mpi3mr/mpi3mr_fw.c | 244 ++++++++++++

>  drivers/scsi/mpi3mr/mpi3mr_os.c | 634 +++++++++++++++++++++++++++++++-

>  3 files changed, 927 insertions(+), 2 deletions(-)

> 

Reviewed-by: Hannes Reinecke <hare@suse.de>


Cheers,

Hannes
-- 
Dr. Hannes Reinecke		        Kernel Storage Architect
hare@suse.de			               +49 911 74053 688
SUSE Software Solutions Germany GmbH, 90409 Nürnberg
GF: F. Imendörffer, HRB 36809 (AG Nürnberg)
diff mbox series

Patch

diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 9582ef2..4b3b76c 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -99,6 +99,7 @@  extern struct list_head mrioc_list;
 
 /* command/controller interaction timeout definitions in seconds */
 #define MPI3MR_INTADMCMD_TIMEOUT		10
+#define MPI3MR_PORTENABLE_TIMEOUT		300
 #define MPI3MR_RESETTM_TIMEOUT			30
 #define MPI3MR_DEFAULT_SHUTDOWN_TIME		120
 
@@ -315,7 +316,43 @@  struct mpi3mr_intr_info {
 	char name[MPI3MR_NAME_LENGTH];
 };
 
+/**
+ * struct mpi3mr_stgt_priv_data - SCSI target private structure
+ *
+ * @starget: Scsi_target pointer
+ * @dev_handle: FW device handle
+ * @perst_id: FW assigned Persistent ID
+ * @num_luns: Number of Logical Units
+ * @block_io: I/O blocked to the device or not
+ * @dev_removed: Device removed in the Firmware
+ * @dev_removedelay: Device is waiting to be removed in FW
+ * @dev_type: Device type
+ * @tgt_dev: Internal target device pointer
+ */
+struct mpi3mr_stgt_priv_data {
+	struct scsi_target *starget;
+	u16 dev_handle;
+	u16 perst_id;
+	u32 num_luns;
+	atomic_t block_io;
+	u8 dev_removed;
+	u8 dev_removedelay;
+	u8 dev_type;
+	struct mpi3mr_tgt_dev *tgt_dev;
+};
 
+/**
+ * struct mpi3mr_stgt_priv_data - SCSI device private structure
+ *
+ * @tgt_priv_data: Scsi_target private data pointer
+ * @lun_id: LUN ID of the device
+ * @ncq_prio_enable: NCQ priority enable for SATA device
+ */
+struct mpi3mr_sdev_priv_data {
+	struct mpi3mr_stgt_priv_data *tgt_priv_data;
+	u32 lun_id;
+	u8 ncq_prio_enable;
+};
 
 /**
  * struct mpi3mr_drv_cmd - Internal command tracker
@@ -445,12 +482,16 @@  struct scmd_priv {
  * @sbq_lock: Sense buffer queue lock
  * @sbq_host_index: Sense buffer queuehost index
  * @is_driver_loading: Is driver still loading
+ * @scan_started: Async scan started
+ * @scan_failed: Asycn scan failed
+ * @stop_drv_processing: Stop all command processing
  * @max_host_ios: Maximum host I/O count
  * @chain_buf_count: Chain buffer count
  * @chain_buf_pool: Chain buffer pool
  * @chain_sgl_list: Chain SGL list
  * @chain_bitmap_sz: Chain buffer allocator bitmap size
  * @chain_bitmap: Chain buffer allocator bitmap
+ * @chain_buf_lock: Chain buffer list lock
  * @reset_in_progress: Reset in progress flag
  * @unrecoverable: Controller unrecoverable flag
  * @logging_level: Controller debug logging level
@@ -535,6 +576,9 @@  struct mpi3mr_ioc {
 	u32 sbq_host_index;
 
 	u8 is_driver_loading;
+	u8 scan_started;
+	u16 scan_failed;
+	u8 stop_drv_processing;
 
 	u16 max_host_ios;
 
@@ -543,6 +587,7 @@  struct mpi3mr_ioc {
 	struct chain_element *chain_sgl_list;
 	u16  chain_bitmap_sz;
 	void *chain_bitmap;
+	spinlock_t chain_buf_lock;
 
 	u8 reset_in_progress;
 	u8 unrecoverable;
@@ -559,8 +604,11 @@  int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
 void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
 int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
 void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc);
+int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async);
 int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
 u16 admin_req_sz, u8 ignore_reset);
+int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
+			   struct op_req_qinfo *opreqq, u8 *req);
 void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length,
 			  dma_addr_t dma_addr);
 void mpi3mr_build_zero_len_sge(void *paddr);
@@ -571,6 +619,9 @@  void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
 void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
 				     u64 sense_buf_dma);
 
+void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
+				  struct mpi3_default_reply_descriptor *reply_desc,
+				  u64 *reply_dma, u16 qidx);
 void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc);
 void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc);
 
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 353bbf4..dad7ef1 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -25,6 +25,22 @@  static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr)
 }
 #endif
 
+static inline bool
+mpi3mr_check_req_qfull(struct op_req_qinfo *op_req_q)
+{
+	u16 pi, ci, max_entries;
+	bool is_qfull = false;
+
+	pi = op_req_q->pi;
+	ci = READ_ONCE(op_req_q->ci);
+	max_entries = op_req_q->num_requests;
+
+	if ((ci == (pi + 1)) || ((!ci) && (pi == (max_entries - 1))))
+		is_qfull = true;
+
+	return is_qfull;
+}
+
 static void mpi3mr_sync_irqs(struct mpi3mr_ioc *mrioc)
 {
 	u16 i, max_vectors;
@@ -283,6 +299,83 @@  static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
 	return num_admin_replies;
 }
 
+/**
+ * mpi3mr_get_reply_desc - get reply descriptor frame corresponding to
+ *	queue's consumer index from operational reply descriptor queue.
+ * @op_reply_q: op_reply_qinfo object
+ * @reply_ci: operational reply descriptor's queue consumer index
+ *
+ * Returns reply descriptor frame address
+ */
+static inline struct mpi3_default_reply_descriptor *
+mpi3mr_get_reply_desc(struct op_reply_qinfo *op_reply_q, u32 reply_ci)
+{
+	void *segment_base_addr;
+	struct segments *segments = op_reply_q->q_segments;
+	struct mpi3_default_reply_descriptor *reply_desc = NULL;
+
+	segment_base_addr =
+	    segments[reply_ci / op_reply_q->segment_qd].segment;
+	reply_desc = (struct mpi3_default_reply_descriptor *)segment_base_addr +
+	    (reply_ci % op_reply_q->segment_qd);
+	return reply_desc;
+}
+
+static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_intr_info *intr_info)
+{
+	struct op_reply_qinfo *op_reply_q = intr_info->op_reply_q;
+	struct op_req_qinfo *op_req_q;
+	u32 exp_phase;
+	u32 reply_ci;
+	u32 num_op_reply = 0;
+	u64 reply_dma = 0;
+	struct mpi3_default_reply_descriptor *reply_desc;
+	u16 req_q_idx = 0, reply_qidx;
+
+	reply_qidx = op_reply_q->qid - 1;
+
+	exp_phase = op_reply_q->ephase;
+	reply_ci = op_reply_q->ci;
+
+	reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
+	if ((le16_to_cpu(reply_desc->reply_flags) &
+	    MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) {
+		return 0;
+	}
+
+	do {
+		req_q_idx = le16_to_cpu(reply_desc->request_queue_id) - 1;
+		op_req_q = &mrioc->req_qinfo[req_q_idx];
+
+		WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci));
+		mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma,
+		    reply_qidx);
+		if (reply_dma)
+			mpi3mr_repost_reply_buf(mrioc, reply_dma);
+		num_op_reply++;
+
+		if (++reply_ci == op_reply_q->num_replies) {
+			reply_ci = 0;
+			exp_phase ^= 1;
+		}
+
+		reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
+
+		if ((le16_to_cpu(reply_desc->reply_flags) &
+		    MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase)
+			break;
+
+	} while (1);
+
+	writel(reply_ci,
+	    &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].consumer_index);
+	op_reply_q->ci = reply_ci;
+	op_reply_q->ephase = exp_phase;
+
+	return num_op_reply;
+}
+
 static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata)
 {
 	struct mpi3mr_intr_info *intr_info = privdata;
@@ -1302,6 +1395,74 @@  out_failed:
 	return retval;
 }
 
+/**
+ * mpi3mr_op_request_post - Post request to operational queue
+ * @mrioc: Adapter reference
+ * @op_req_q: Operational request queue info
+ * @req: MPI3 request
+ *
+ * Post the MPI3 request into operational request queue and
+ * inform the controller, if the queue is full return
+ * appropriate error.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
+	struct op_req_qinfo *op_req_q, u8 *req)
+{
+	u16 pi = 0, max_entries, reply_qidx = 0, midx;
+	int retval = 0;
+	unsigned long flags;
+	u8 *req_entry;
+	void *segment_base_addr;
+	u16 req_sz = mrioc->facts.op_req_sz;
+	struct segments *segments = op_req_q->q_segments;
+
+	reply_qidx = op_req_q->reply_qid - 1;
+
+	if (mrioc->unrecoverable)
+		return -EFAULT;
+
+	spin_lock_irqsave(&op_req_q->q_lock, flags);
+	pi = op_req_q->pi;
+	max_entries = op_req_q->num_requests;
+
+	if (mpi3mr_check_req_qfull(op_req_q)) {
+		midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(
+		    reply_qidx, mrioc->op_reply_q_offset);
+		mpi3mr_process_op_reply_q(mrioc, &mrioc->intr_info[midx]);
+
+		if (mpi3mr_check_req_qfull(op_req_q)) {
+			retval = -EAGAIN;
+			goto out;
+		}
+	}
+
+	if (mrioc->reset_in_progress) {
+		ioc_err(mrioc, "OpReqQ submit reset in progress\n");
+		retval = -EAGAIN;
+		goto out;
+	}
+
+	segment_base_addr = segments[pi / op_req_q->segment_qd].segment;
+	req_entry = (u8 *)segment_base_addr +
+	    ((pi % op_req_q->segment_qd) * req_sz);
+
+	memset(req_entry, 0, req_sz);
+	memcpy(req_entry, req, MPI3MR_ADMIN_REQ_FRAME_SZ);
+
+	if (++pi == max_entries)
+		pi = 0;
+	op_req_q->pi = pi;
+
+	writel(op_req_q->pi,
+	    &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].producer_index);
+
+out:
+	spin_unlock_irqrestore(&op_req_q->q_lock, flags);
+	return retval;
+}
+
 /**
  * mpi3mr_setup_admin_qpair - Setup admin queue pair
  * @mrioc: Adapter instance reference
@@ -1887,6 +2048,89 @@  out_failed:
 	return retval;
 }
 
+/**
+ * mpi3mr_port_enable_complete - Mark port enable complete
+ * @mrioc: Adapter instance reference
+ * @drv_cmd: Internal command tracker
+ *
+ * Call back for asynchronous port enable request sets the
+ * driver command to indicate port enable request is complete.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_port_enable_complete(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_drv_cmd *drv_cmd)
+{
+	drv_cmd->state = MPI3MR_CMD_NOTUSED;
+	drv_cmd->callback = NULL;
+	mrioc->scan_failed = drv_cmd->ioc_status;
+	mrioc->scan_started = 0;
+}
+
+/**
+ * mpi3mr_issue_port_enable - Issue Port Enable
+ * @mrioc: Adapter instance reference
+ * @async: Flag to wait for completion or not
+ *
+ * Issue Port Enable MPI request through admin queue and if the
+ * async flag is not set wait for the completion of the port
+ * enable or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async)
+{
+	struct mpi3_port_enable_request pe_req;
+	int retval = 0;
+	u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT;
+
+	memset(&pe_req, 0, sizeof(pe_req));
+	mutex_lock(&mrioc->init_cmds.mutex);
+	if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+		retval = -1;
+		ioc_err(mrioc, "Issue PortEnable: Init command is in use\n");
+		mutex_unlock(&mrioc->init_cmds.mutex);
+		goto out;
+	}
+	mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+	if (async) {
+		mrioc->init_cmds.is_waiting = 0;
+		mrioc->init_cmds.callback = mpi3mr_port_enable_complete;
+	} else {
+		mrioc->init_cmds.is_waiting = 1;
+		mrioc->init_cmds.callback = NULL;
+		init_completion(&mrioc->init_cmds.done);
+	}
+	pe_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+	pe_req.function = MPI3_FUNCTION_PORT_ENABLE;
+
+	retval = mpi3mr_admin_request_post(mrioc, &pe_req, sizeof(pe_req), 1);
+	if (retval) {
+		ioc_err(mrioc, "Issue PortEnable: Admin Post failed\n");
+		goto out_unlock;
+	}
+	if (!async) {
+		wait_for_completion_timeout(&mrioc->init_cmds.done,
+		    (pe_timeout * HZ));
+		if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+			ioc_err(mrioc, "Issue PortEnable: command timed out\n");
+			retval = -1;
+			mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
+			mpi3mr_set_diagsave(mrioc);
+			mpi3mr_issue_reset(mrioc,
+			    MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+			    MPI3MR_RESET_FROM_PE_TIMEOUT);
+			mrioc->unrecoverable = 1;
+			goto out_unlock;
+		}
+		mpi3mr_port_enable_complete(mrioc, &mrioc->init_cmds);
+	}
+out_unlock:
+	mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+	return retval;
+}
+
 /**
  * mpi3mr_cleanup_resources - Free PCI resources
  * @mrioc: Adapter instance reference
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index bda5312..5afcd55 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -26,6 +26,462 @@  module_param(logging_level, int, 0);
 MODULE_PARM_DESC(logging_level,
 	" bits for enabling additional logging info (default=0)");
 
+/* Forward declarations*/
+/**
+ * mpi3mr_host_tag_for_scmd - Get host tag for a scmd
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ *
+ * Calculate the host tag based on block tag for a given scmd.
+ *
+ * Return: Valid host tag or MPI3MR_HOSTTAG_INVALID.
+ */
+static u16 mpi3mr_host_tag_for_scmd(struct mpi3mr_ioc *mrioc,
+	struct scsi_cmnd *scmd)
+{
+	struct scmd_priv *priv = NULL;
+	u32 unique_tag;
+	u16 host_tag, hw_queue;
+
+	unique_tag = blk_mq_unique_tag(scmd->request);
+
+	hw_queue = blk_mq_unique_tag_to_hwq(unique_tag);
+	if (hw_queue >= mrioc->num_op_reply_q)
+		return MPI3MR_HOSTTAG_INVALID;
+	host_tag = blk_mq_unique_tag_to_tag(unique_tag);
+
+	if (WARN_ON(host_tag >= mrioc->max_host_ios))
+		return MPI3MR_HOSTTAG_INVALID;
+
+	priv = scsi_cmd_priv(scmd);
+	/*host_tag 0 is invalid hence incrementing by 1*/
+	priv->host_tag = host_tag + 1;
+	priv->scmd = scmd;
+	priv->in_lld_scope = 1;
+	priv->req_q_idx = hw_queue;
+	priv->chain_idx = -1;
+	return priv->host_tag;
+}
+
+/**
+ * mpi3mr_scmd_from_host_tag - Get SCSI command from host tag
+ * @mrioc: Adapter instance reference
+ * @host_tag: Host tag
+ * @qidx: Operational queue index
+ *
+ * Identify the block tag from the host tag and queue index and
+ * retrieve associated scsi command using scsi_host_find_tag().
+ *
+ * Return: SCSI command reference or NULL.
+ */
+static struct scsi_cmnd *mpi3mr_scmd_from_host_tag(
+	struct mpi3mr_ioc *mrioc, u16 host_tag, u16 qidx)
+{
+	struct scsi_cmnd *scmd = NULL;
+	struct scmd_priv *priv = NULL;
+	u32 unique_tag = host_tag - 1;
+
+	if (WARN_ON(host_tag > mrioc->max_host_ios))
+		goto out;
+
+	unique_tag |= (qidx << BLK_MQ_UNIQUE_TAG_BITS);
+
+	scmd = scsi_host_find_tag(mrioc->shost, unique_tag);
+	if (scmd) {
+		priv = scsi_cmd_priv(scmd);
+		if (!priv->in_lld_scope)
+			scmd = NULL;
+	}
+out:
+	return scmd;
+}
+
+/**
+ * mpi3mr_clear_scmd_priv - Cleanup SCSI command private date
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ *
+ * Invalidate the SCSI command private data to mark the command
+ * is not in LLD scope anymore.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc,
+	struct scsi_cmnd *scmd)
+{
+	struct scmd_priv *priv = NULL;
+
+	priv = scsi_cmd_priv(scmd);
+
+	if (WARN_ON(priv->in_lld_scope == 0))
+		return;
+	priv->host_tag = MPI3MR_HOSTTAG_INVALID;
+	priv->req_q_idx = 0xFFFF;
+	priv->scmd = NULL;
+	priv->in_lld_scope = 0;
+	if (priv->chain_idx >= 0) {
+		clear_bit(priv->chain_idx, mrioc->chain_bitmap);
+		priv->chain_idx = -1;
+	}
+}
+
+/**
+ * mpi3mr_process_op_reply_desc - reply descriptor handler
+ * @mrioc: Adapter instance reference
+ * @reply_desc: Operational reply descriptor
+ * @reply_dma: place holder for reply DMA address
+ * @qidx: Operational queue index
+ *
+ * Process the operational reply descriptor and identifies the
+ * descriptor type. Based on the descriptor map the MPI3 request
+ * status to a SCSI command status and calls scsi_done call
+ * back.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
+	struct mpi3_default_reply_descriptor *reply_desc, u64 *reply_dma, u16 qidx)
+{
+	u16 reply_desc_type, host_tag = 0;
+	u16 ioc_status = MPI3_IOCSTATUS_SUCCESS;
+	u32 ioc_loginfo = 0;
+	struct mpi3_status_reply_descriptor *status_desc = NULL;
+	struct mpi3_address_reply_descriptor *addr_desc = NULL;
+	struct mpi3_success_reply_descriptor *success_desc = NULL;
+	struct mpi3_scsi_io_reply *scsi_reply = NULL;
+	struct scsi_cmnd *scmd = NULL;
+	struct scmd_priv *priv = NULL;
+	u8 *sense_buf = NULL;
+	u8 scsi_state = 0, scsi_status = 0, sense_state = 0;
+	u32 xfer_count = 0, sense_count = 0, resp_data = 0;
+	u16 dev_handle = 0xFFFF;
+	struct scsi_sense_hdr sshdr;
+
+	*reply_dma = 0;
+	reply_desc_type = le16_to_cpu(reply_desc->reply_flags) &
+	    MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK;
+	switch (reply_desc_type) {
+	case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS:
+		status_desc = (struct mpi3_status_reply_descriptor *)reply_desc;
+		host_tag = le16_to_cpu(status_desc->host_tag);
+		ioc_status = le16_to_cpu(status_desc->ioc_status);
+		if (ioc_status &
+		    MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
+			ioc_loginfo = le32_to_cpu(status_desc->ioc_log_info);
+		ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
+		break;
+	case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY:
+		addr_desc = (struct mpi3_address_reply_descriptor *)reply_desc;
+		*reply_dma = le64_to_cpu(addr_desc->reply_frame_address);
+		scsi_reply = mpi3mr_get_reply_virt_addr(mrioc,
+		    *reply_dma);
+		if (!scsi_reply) {
+			panic("%s: scsi_reply is NULL, this shouldn't happen\n",
+			    mrioc->name);
+			goto out;
+		}
+		host_tag = le16_to_cpu(scsi_reply->host_tag);
+		ioc_status = le16_to_cpu(scsi_reply->ioc_status);
+		scsi_status = scsi_reply->scsi_status;
+		scsi_state = scsi_reply->scsi_state;
+		dev_handle = le16_to_cpu(scsi_reply->dev_handle);
+		sense_state = (scsi_state & MPI3_SCSI_STATE_SENSE_MASK);
+		xfer_count = le32_to_cpu(scsi_reply->transfer_count);
+		sense_count = le32_to_cpu(scsi_reply->sense_count);
+		resp_data = le32_to_cpu(scsi_reply->response_data);
+		sense_buf = mpi3mr_get_sensebuf_virt_addr(mrioc,
+		    le64_to_cpu(scsi_reply->sense_data_buffer_address));
+		if (ioc_status &
+		    MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
+			ioc_loginfo = le32_to_cpu(scsi_reply->ioc_log_info);
+		ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
+		if (sense_state == MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY)
+			panic("%s: Ran out of sense buffers\n", mrioc->name);
+		break;
+	case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS:
+		success_desc = (struct mpi3_success_reply_descriptor *)reply_desc;
+		host_tag = le16_to_cpu(success_desc->host_tag);
+		break;
+	default:
+		break;
+	}
+	scmd = mpi3mr_scmd_from_host_tag(mrioc, host_tag, qidx);
+	if (!scmd) {
+		panic("%s: Cannot Identify scmd for host_tag 0x%x\n",
+		    mrioc->name, host_tag);
+		goto out;
+	}
+	priv = scsi_cmd_priv(scmd);
+	if (success_desc) {
+		scmd->result = DID_OK << 16;
+		goto out_success;
+	}
+	if (ioc_status == MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN &&
+	    xfer_count == 0 && (scsi_status == MPI3_SCSI_STATUS_BUSY ||
+	    scsi_status == MPI3_SCSI_STATUS_RESERVATION_CONFLICT ||
+	    scsi_status == MPI3_SCSI_STATUS_TASK_SET_FULL))
+		ioc_status = MPI3_IOCSTATUS_SUCCESS;
+
+	if ((sense_state == MPI3_SCSI_STATE_SENSE_VALID) && sense_count &&
+	    sense_buf) {
+		u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, sense_count);
+
+		memcpy(scmd->sense_buffer, sense_buf, sz);
+	}
+
+	switch (ioc_status) {
+	case MPI3_IOCSTATUS_BUSY:
+	case MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		scmd->result = SAM_STAT_BUSY;
+		break;
+	case MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+		scmd->result = DID_NO_CONNECT << 16;
+		break;
+	case MPI3_IOCSTATUS_SCSI_IOC_TERMINATED:
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+	case MPI3_IOCSTATUS_SCSI_TASK_TERMINATED:
+	case MPI3_IOCSTATUS_SCSI_EXT_TERMINATED:
+		scmd->result = DID_RESET << 16;
+		break;
+	case MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+		if ((xfer_count == 0) || (scmd->underflow > xfer_count))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else
+			scmd->result = (DID_OK << 16) | scsi_status;
+		break;
+	case MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN:
+		scmd->result = (DID_OK << 16) | scsi_status;
+		if (sense_state == MPI3_SCSI_STATE_SENSE_VALID)
+			break;
+		if (xfer_count < scmd->underflow) {
+			if (scsi_status == SAM_STAT_BUSY)
+				scmd->result = SAM_STAT_BUSY;
+			else
+				scmd->result = DID_SOFT_ERROR << 16;
+		} else if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS)) ||
+		    (sense_state != MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		break;
+	case MPI3_IOCSTATUS_SCSI_DATA_OVERRUN:
+		scsi_set_resid(scmd, 0);
+		fallthrough;
+	case MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR:
+	case MPI3_IOCSTATUS_SUCCESS:
+		scmd->result = (DID_OK << 16) | scsi_status;
+		if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS)) ||
+			(sense_state == MPI3_SCSI_STATE_SENSE_FAILED) ||
+			(sense_state == MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		break;
+	case MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+	case MPI3_IOCSTATUS_INVALID_FUNCTION:
+	case MPI3_IOCSTATUS_INVALID_SGL:
+	case MPI3_IOCSTATUS_INTERNAL_ERROR:
+	case MPI3_IOCSTATUS_INVALID_FIELD:
+	case MPI3_IOCSTATUS_INVALID_STATE:
+	case MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR:
+	case MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+	case MPI3_IOCSTATUS_INSUFFICIENT_POWER:
+	default:
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+	}
+
+	if (scmd->result != (DID_OK << 16) && (scmd->cmnd[0] != ATA_12) &&
+	    (scmd->cmnd[0] != ATA_16)) {
+		ioc_info(mrioc, "%s :scmd->result 0x%x\n", __func__,
+		    scmd->result);
+		scsi_print_command(scmd);
+		ioc_info(mrioc,
+		    "%s :Command issued to handle 0x%02x returned with error 0x%04x loginfo 0x%08x, qid %d\n",
+		    __func__, dev_handle, ioc_status, ioc_loginfo,
+		    priv->req_q_idx + 1);
+		ioc_info(mrioc,
+		    " host_tag %d scsi_state 0x%02x scsi_status 0x%02x, xfer_cnt %d resp_data 0x%x\n",
+		    host_tag, scsi_state, scsi_status, xfer_count, resp_data);
+		if (sense_buf) {
+			scsi_normalize_sense(sense_buf, sense_count, &sshdr);
+			ioc_info(mrioc,
+			    "%s :sense_count 0x%x, sense_key 0x%x ASC 0x%x, ASCQ 0x%x\n",
+			    __func__, sense_count, sshdr.sense_key,
+			    sshdr.asc, sshdr.ascq);
+		}
+	}
+out_success:
+	mpi3mr_clear_scmd_priv(mrioc, scmd);
+	scsi_dma_unmap(scmd);
+	scmd->scsi_done(scmd);
+out:
+	if (sense_buf)
+		mpi3mr_repost_sense_buf(mrioc,
+		    le64_to_cpu(scsi_reply->sense_data_buffer_address));
+}
+
+/**
+ * mpi3mr_get_chain_idx - get free chain buffer index
+ * @mrioc: Adapter instance reference
+ *
+ * Try to get a free chain buffer index from the free pool.
+ *
+ * Return: -1 on failure or the free chain buffer index
+ */
+static int mpi3mr_get_chain_idx(struct mpi3mr_ioc *mrioc)
+{
+	u8 retry_count = 5;
+	int cmd_idx = -1;
+
+	do {
+		spin_lock(&mrioc->chain_buf_lock);
+		cmd_idx = find_first_zero_bit(mrioc->chain_bitmap,
+		    mrioc->chain_buf_count);
+		if (cmd_idx < mrioc->chain_buf_count) {
+			set_bit(cmd_idx, mrioc->chain_bitmap);
+			spin_unlock(&mrioc->chain_buf_lock);
+			break;
+		}
+		spin_unlock(&mrioc->chain_buf_lock);
+		cmd_idx = -1;
+	} while (retry_count--);
+	return cmd_idx;
+}
+
+/**
+ * mpi3mr_prepare_sg_scmd - build scatter gather list
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ * @scsiio_req: MPI3 SCSI IO request
+ *
+ * This function maps SCSI command's data and protection SGEs to
+ * MPI request SGEs. If required additional 4K chain buffer is
+ * used to send the SGEs.
+ *
+ * Return: 0 on success, -ENOMEM on dma_map_sg failure
+ */
+static int mpi3mr_prepare_sg_scmd(struct mpi3mr_ioc *mrioc,
+	struct scsi_cmnd *scmd, struct mpi3_scsi_io_request *scsiio_req)
+{
+	dma_addr_t chain_dma;
+	struct scatterlist *sg_scmd;
+	void *sg_local, *chain;
+	u32 chain_length;
+	int sges_left, chain_idx;
+	u32 sges_in_segment;
+	u8 simple_sgl_flags;
+	u8 simple_sgl_flags_last;
+	u8 last_chain_sgl_flags;
+	struct chain_element *chain_req;
+	struct scmd_priv *priv = NULL;
+
+	priv = scsi_cmd_priv(scmd);
+
+	simple_sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE |
+	    MPI3_SGE_FLAGS_DLAS_SYSTEM;
+	simple_sgl_flags_last = simple_sgl_flags |
+	    MPI3_SGE_FLAGS_END_OF_LIST;
+	last_chain_sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN |
+	    MPI3_SGE_FLAGS_DLAS_SYSTEM;
+
+	sg_local = &scsiio_req->sgl;
+
+	if (!scsiio_req->data_length) {
+		mpi3mr_build_zero_len_sge(sg_local);
+		return 0;
+	}
+
+	sg_scmd = scsi_sglist(scmd);
+	sges_left = scsi_dma_map(scmd);
+
+	if (sges_left < 0) {
+		sdev_printk(KERN_ERR, scmd->device,
+		    "scsi_dma_map failed: request for %d bytes!\n",
+		    scsi_bufflen(scmd));
+		return -ENOMEM;
+	}
+	if (sges_left > MPI3MR_SG_DEPTH) {
+		sdev_printk(KERN_ERR, scmd->device,
+		    "scsi_dma_map returned unsupported sge count %d!\n",
+		    sges_left);
+		return -ENOMEM;
+	}
+
+	sges_in_segment = (mrioc->facts.op_req_sz -
+	    offsetof(struct mpi3_scsi_io_request, sgl)) / sizeof(struct mpi3_sge_common);
+
+	if (sges_left <= sges_in_segment)
+		goto fill_in_last_segment;
+
+	/* fill in main message segment when there is a chain following */
+	while (sges_in_segment > 1) {
+		mpi3mr_add_sg_single(sg_local, simple_sgl_flags,
+		    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += sizeof(struct mpi3_sge_common);
+		sges_left--;
+		sges_in_segment--;
+	}
+
+	chain_idx = mpi3mr_get_chain_idx(mrioc);
+	if (chain_idx < 0)
+		return -1;
+	chain_req = &mrioc->chain_sgl_list[chain_idx];
+	priv->chain_idx = chain_idx;
+
+	chain = chain_req->addr;
+	chain_dma = chain_req->dma_addr;
+	sges_in_segment = sges_left;
+	chain_length = sges_in_segment * sizeof(struct mpi3_sge_common);
+
+	mpi3mr_add_sg_single(sg_local, last_chain_sgl_flags,
+	    chain_length, chain_dma);
+
+	sg_local = chain;
+
+fill_in_last_segment:
+	while (sges_left > 0) {
+		if (sges_left == 1)
+			mpi3mr_add_sg_single(sg_local,
+			    simple_sgl_flags_last, sg_dma_len(sg_scmd),
+			    sg_dma_address(sg_scmd));
+		else
+			mpi3mr_add_sg_single(sg_local, simple_sgl_flags,
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += sizeof(struct mpi3_sge_common);
+		sges_left--;
+	}
+
+	return 0;
+}
+
+/**
+ * mpi3mr_build_sg_scmd - build scatter gather list for SCSI IO
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ * @scsiio_req: MPI3 SCSI IO request
+ *
+ * This function calls mpi3mr_prepare_sg_scmd for constructing
+ * both data SGEs and protection information SGEs in the MPI
+ * format from the SCSI Command as appropriate .
+ *
+ * Return: return value of mpi3mr_prepare_sg_scmd.
+ */
+static int mpi3mr_build_sg_scmd(struct mpi3mr_ioc *mrioc,
+	struct scsi_cmnd *scmd, struct mpi3_scsi_io_request *scsiio_req)
+{
+	int ret;
+
+	ret = mpi3mr_prepare_sg_scmd(mrioc, scmd, scsiio_req);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
 /**
  * mpi3mr_map_queues - Map queues callback handler
  * @shost: SCSI host reference
@@ -43,6 +499,71 @@  static int mpi3mr_map_queues(struct Scsi_Host *shost)
 	    mrioc->pdev, mrioc->op_reply_q_offset);
 }
 
+/**
+ * mpi3mr_scan_start - Scan start callback handler
+ * @shost: SCSI host reference
+ *
+ * Issue port enable request asynchronously.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_scan_start(struct Scsi_Host *shost)
+{
+	struct mpi3mr_ioc *mrioc = shost_priv(shost);
+
+	mrioc->scan_started = 1;
+	ioc_info(mrioc, "%s :Issuing Port Enable\n", __func__);
+	if (mpi3mr_issue_port_enable(mrioc, 1)) {
+		ioc_err(mrioc, "%s :Issuing port enable failed\n", __func__);
+		mrioc->scan_started = 0;
+		mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
+	}
+}
+
+/**
+ * mpi3mr_scan_finished - Scan finished callback handler
+ * @shost: SCSI host reference
+ * @time: Jiffies from the scan start
+ *
+ * Checks whether the port enable is completed or timedout or
+ * failed and set the scan status accordingly after taking any
+ * recovery if required.
+ *
+ * Return: 1 on scan finished or timed out, 0 for in progress
+ */
+static int mpi3mr_scan_finished(struct Scsi_Host *shost,
+	unsigned long time)
+{
+	struct mpi3mr_ioc *mrioc = shost_priv(shost);
+	u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT;
+
+	if (time >= (pe_timeout * HZ)) {
+		mrioc->init_cmds.is_waiting = 0;
+		mrioc->init_cmds.callback = NULL;
+		mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+		ioc_err(mrioc, "%s :port enable request timed out\n", __func__);
+		mrioc->is_driver_loading = 0;
+		mpi3mr_soft_reset_handler(mrioc,
+		    MPI3MR_RESET_FROM_PE_TIMEOUT, 1);
+	}
+
+	if (mrioc->scan_failed) {
+		ioc_err(mrioc,
+		    "%s :port enable failed with (ioc_status=0x%08x)\n",
+		    __func__, mrioc->scan_failed);
+		mrioc->is_driver_loading = 0;
+		mrioc->stop_drv_processing = 1;
+		return 1;
+	}
+
+	if (mrioc->scan_started)
+		return 0;
+	ioc_info(mrioc, "%s :port enable: SUCCESS\n", __func__);
+	mrioc->is_driver_loading = 0;
+
+	return 1;
+}
+
 /**
  * mpi3mr_slave_destroy - Slave destroy callback handler
  * @sdev: SCSI device reference
@@ -125,10 +646,114 @@  static int mpi3mr_target_alloc(struct scsi_target *starget)
 static int mpi3mr_qcmd(struct Scsi_Host *shost,
 	struct scsi_cmnd *scmd)
 {
+	struct mpi3mr_ioc *mrioc = shost_priv(shost);
+	struct mpi3mr_stgt_priv_data *stgt_priv_data;
+	struct mpi3mr_sdev_priv_data *sdev_priv_data;
+	struct scmd_priv *scmd_priv_data = NULL;
+	struct mpi3_scsi_io_request *scsiio_req = NULL;
+	struct op_req_qinfo *op_req_q = NULL;
 	int retval = 0;
+	u16 dev_handle;
+	u16 host_tag;
+	u32 scsiio_flags = 0;
+	struct request *rq = scmd->request;
+	int iprio_class;
+
+	sdev_priv_data = scmd->device->hostdata;
+	if (!sdev_priv_data || !sdev_priv_data->tgt_priv_data) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		goto out;
+	}
 
-	scmd->result = DID_NO_CONNECT << 16;
-	scmd->scsi_done(scmd);
+	if (mrioc->stop_drv_processing) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		goto out;
+	}
+
+	if (mrioc->reset_in_progress) {
+		retval = SCSI_MLQUEUE_HOST_BUSY;
+		goto out;
+	}
+
+	stgt_priv_data = sdev_priv_data->tgt_priv_data;
+
+	dev_handle = stgt_priv_data->dev_handle;
+	if (dev_handle == MPI3MR_INVALID_DEV_HANDLE) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		goto out;
+	}
+	if (stgt_priv_data->dev_removed) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		goto out;
+	}
+
+	if (atomic_read(&stgt_priv_data->block_io)) {
+		if (mrioc->stop_drv_processing) {
+			scmd->result = DID_NO_CONNECT << 16;
+			scmd->scsi_done(scmd);
+			goto out;
+		}
+		retval = SCSI_MLQUEUE_DEVICE_BUSY;
+		goto out;
+	}
+
+	host_tag = mpi3mr_host_tag_for_scmd(mrioc, scmd);
+	if (host_tag == MPI3MR_HOSTTAG_INVALID) {
+		scmd->result = DID_ERROR << 16;
+		scmd->scsi_done(scmd);
+		goto out;
+	}
+
+	if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+		scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_READ;
+	else if (scmd->sc_data_direction == DMA_TO_DEVICE)
+		scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE;
+	else
+		scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER;
+
+	scsiio_flags |= MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ;
+
+	if (sdev_priv_data->ncq_prio_enable) {
+		iprio_class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
+		if (iprio_class == IOPRIO_CLASS_RT)
+			scsiio_flags |= 1 << MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT;
+	}
+
+	if (scmd->cmd_len > 16)
+		scsiio_flags |= MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16;
+
+	scmd_priv_data = scsi_cmd_priv(scmd);
+	memset(scmd_priv_data->mpi3mr_scsiio_req, 0, MPI3MR_ADMIN_REQ_FRAME_SZ);
+	scsiio_req = (struct mpi3_scsi_io_request *)scmd_priv_data->mpi3mr_scsiio_req;
+	scsiio_req->function = MPI3_FUNCTION_SCSI_IO;
+	scsiio_req->host_tag = cpu_to_le16(host_tag);
+
+	memcpy(scsiio_req->cdb.cdb32, scmd->cmnd, scmd->cmd_len);
+	scsiio_req->data_length = cpu_to_le32(scsi_bufflen(scmd));
+	scsiio_req->dev_handle = cpu_to_le16(dev_handle);
+	scsiio_req->flags = cpu_to_le32(scsiio_flags);
+	int_to_scsilun(sdev_priv_data->lun_id,
+	    (struct scsi_lun *)scsiio_req->lun);
+
+	if (mpi3mr_build_sg_scmd(mrioc, scmd, scsiio_req)) {
+		mpi3mr_clear_scmd_priv(mrioc, scmd);
+		retval = SCSI_MLQUEUE_HOST_BUSY;
+		goto out;
+	}
+	op_req_q = &mrioc->req_qinfo[scmd_priv_data->req_q_idx];
+
+	if (mpi3mr_op_request_post(mrioc, op_req_q,
+	    scmd_priv_data->mpi3mr_scsiio_req)) {
+		mpi3mr_clear_scmd_priv(mrioc, scmd);
+		retval = SCSI_MLQUEUE_HOST_BUSY;
+		goto out;
+	}
+
+out:
 	return retval;
 }
 
@@ -142,6 +767,8 @@  static struct scsi_host_template mpi3mr_driver_template = {
 	.slave_configure		= mpi3mr_slave_configure,
 	.target_destroy			= mpi3mr_target_destroy,
 	.slave_destroy			= mpi3mr_slave_destroy,
+	.scan_finished			= mpi3mr_scan_finished,
+	.scan_start			= mpi3mr_scan_start,
 	.map_queues			= mpi3mr_map_queues,
 	.no_write_same			= 1,
 	.can_queue			= 1,
@@ -216,6 +843,7 @@  mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init(&mrioc->admin_req_lock);
 	spin_lock_init(&mrioc->reply_free_queue_lock);
 	spin_lock_init(&mrioc->sbq_lock);
+	spin_lock_init(&mrioc->chain_buf_lock);
 
 	mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
 	if (pdev->revision)
@@ -285,6 +913,7 @@  static void mpi3mr_remove(struct pci_dev *pdev)
 	while (mrioc->reset_in_progress || mrioc->is_driver_loading)
 		ssleep(1);
 
+	mrioc->stop_drv_processing = 1;
 	scsi_remove_host(shost);
 
 	mpi3mr_cleanup_ioc(mrioc);
@@ -317,6 +946,7 @@  static void mpi3mr_shutdown(struct pci_dev *pdev)
 	while (mrioc->reset_in_progress || mrioc->is_driver_loading)
 		ssleep(1);
 
+	mrioc->stop_drv_processing = 1;
 	mpi3mr_cleanup_ioc(mrioc);
 }