diff mbox series

[v2,1/2] dt-bindings: net: nfc: s3fwrn5: Add optional clock

Message ID 20210519091613.7343-1-stephan@gerhold.net
State Superseded
Headers show
Series [v2,1/2] dt-bindings: net: nfc: s3fwrn5: Add optional clock | expand

Commit Message

Stephan Gerhold May 19, 2021, 9:16 a.m. UTC
On some systems, S3FWRN5 depends on having an external clock enabled
to function correctly. Allow declaring that clock in the device tree.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
Changes in v2: Minor change in commit message only
v1: https://lore.kernel.org/netdev/20210518133935.571298-1-stephan@gerhold.net/
---
 .../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml         | 5 +++++
 1 file changed, 5 insertions(+)

Comments

patchwork-bot+netdevbpf@kernel.org May 19, 2021, 7:50 p.m. UTC | #1
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Wed, 19 May 2021 11:16:12 +0200 you wrote:
> On some systems, S3FWRN5 depends on having an external clock enabled
> to function correctly. Allow declaring that clock in the device tree.
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> Changes in v2: Minor change in commit message only
> v1: https://lore.kernel.org/netdev/20210518133935.571298-1-stephan@gerhold.net/
> 
> [...]

Here is the summary with links:
  - [v2,1/2] dt-bindings: net: nfc: s3fwrn5: Add optional clock
    https://git.kernel.org/netdev/net-next/c/9cc52f5a533a
  - [v2,2/2] nfc: s3fwrn5: i2c: Enable optional clock from device tree
    https://git.kernel.org/netdev/net-next/c/340f42f7ff0b

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 477066e2b821..081742c2b726 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -27,6 +27,9 @@  properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   wake-gpios:
     maxItems: 1
     description:
@@ -80,6 +83,8 @@  examples:
 
             en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
             wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&rpmcc 20>;
         };
     };
   # UART example on Raspberry Pi