@@ -1,8 +1,7 @@
Device tree bindings for ARM PL353 static memory controller
-PL353 static memory controller supports two kinds of memory
-interfaces.i.e NAND and SRAM/NOR interfaces.
-The actual devices are instantiated from the child nodes of pl353 smc node.
+PL353 Static Memory Controller is a bus where you can connect two kinds
+of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
Required properties:
- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell".
@@ -13,9 +12,9 @@ Required properties:
- address-cells : Must be 2.
- size-cells : Must be 1.
-Child nodes:
- For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
-supported as child nodes.
+The child device node represents the controller connected to the SMC
+bus. Only one between: NAND controller, NOR controller and SRAM controller
+is allowed in a single system.
for NAND partition information please refer the below file
Documentation/devicetree/bindings/mtd/partition.txt
Reword this document before converting it to yaml. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- .../bindings/memory-controllers/pl353-smc.txt | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)