diff mbox series

drivers/net: Remove leading spaces in Kconfig

Message ID 20210517095833.81681-1-juergh@canonical.com
State New
Headers show
Series drivers/net: Remove leading spaces in Kconfig | expand

Commit Message

Juerg Haefliger May 17, 2021, 9:58 a.m. UTC
Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

  $ find drivers/net -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
 drivers/net/usb/Kconfig | 10 +++++-----
 drivers/net/wan/Kconfig |  4 ++--
 2 files changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index fbbe78643631..179308782888 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -169,7 +169,7 @@  config USB_NET_AX8817X
 	  This option adds support for ASIX AX88xxx based USB 2.0
 	  10/100 Ethernet adapters.
 
- 	  This driver should work with at least the following devices:
+	  This driver should work with at least the following devices:
 	    * Aten UC210T
 	    * ASIX AX88172
 	    * Billionton Systems, USB2AR
@@ -220,13 +220,13 @@  config USB_NET_CDCETHER
 	  CDC Ethernet is an implementation option for DOCSIS cable modems
 	  that support USB connectivity, used for non-Microsoft USB hosts.
 	  The Linux-USB CDC Ethernet Gadget driver is an open implementation.
- 	  This driver should work with at least the following devices:
+	  This driver should work with at least the following devices:
 
 	    * Dell Wireless 5530 HSPA
- 	    * Ericsson PipeRider (all variants)
+	    * Ericsson PipeRider (all variants)
 	    * Ericsson Mobile Broadband Module (all variants)
- 	    * Motorola (DM100 and SB4100)
- 	    * Broadcom Cable Modem (reference design)
+	    * Motorola (DM100 and SB4100)
+	    * Broadcom Cable Modem (reference design)
 	    * Toshiba (PCX1100U and F3507g/F3607gw)
 	    * ...
 
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 83c9481995dd..473df2505c8e 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -49,7 +49,7 @@  config COSA
 	  network device.
 
 	  You will need user-space utilities COSA or SRP boards for downloading
- 	  the firmware to the cards and to set them up. Look at the
+	  the firmware to the cards and to set them up. Look at the
 	  <http://www.fi.muni.cz/~kas/cosa/> for more information. You can also
 	  read the comment at the top of the <file:drivers/net/wan/cosa.c> for
 	  details about the cards and the driver itself.
@@ -108,7 +108,7 @@  config HDLC
 	  Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
 	  Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
 
- 	  To compile this driver as a module, choose M here: the
+	  To compile this driver as a module, choose M here: the
 	  module will be called hdlc.
 
 	  If unsure, say N.