@@ -1485,7 +1485,7 @@ typedef void (*usb_complete_t)(struct urb *);
*
* Note that transfer_buffer must still be set if the controller
* does not support DMA (as indicated by hcd_uses_dma()) and when talking
- * to root hub. If you have to trasfer between highmem zone and the device
+ * to root hub. If you have to transfer between highmem zone and the device
* on such controller, create a bounce buffer or bail out with an error.
* If transfer_buffer cannot be set (is in highmem) and the controller is DMA
* capable, assign NULL to it, so that usbmon knows not to use the value.
@@ -271,7 +271,7 @@ int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
* @bConfigurationValue: Copied into configuration descriptor.
* @iConfiguration: Copied into configuration descriptor.
* @bmAttributes: Copied into configuration descriptor.
- * @MaxPower: Power consumtion in mA. Used to compute bMaxPower in the
+ * @MaxPower: Power consumption in mA. Used to compute bMaxPower in the
* configuration descriptor after considering the bus speed.
* @cdev: assigned by @usb_add_config() before calling @bind(); this is
* the device associated with this configuration.
@@ -197,7 +197,7 @@ struct usb_ep_caps {
* @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
* @ops: Function pointers used to access hardware-specific operations.
* @ep_list:the gadget's ep_list holds all of its endpoints
- * @caps:The structure describing types and directions supported by endoint.
+ * @caps:The structure describing types and directions supported by endpoint.
* @enabled: The current endpoint enabled/disabled state.
* @claimed: True if this endpoint is claimed by a function.
* @maxpacket:The maximum packet size used on this endpoint. The initial
@@ -59,7 +59,7 @@
* USB Host Controller Driver (usb_hcd) framework
*
* Since "struct usb_bus" is so thin, you can't share much code in it.
- * This framework is a layer over that, and should be more sharable.
+ * This framework is a layer over that, and should be more shareable.
*/
/*-------------------------------------------------------------------------*/
@@ -299,7 +299,7 @@ struct hc_driver {
* (optional) these hooks allow an HCD to override the default DMA
* mapping and unmapping routines. In general, they shouldn't be
* necessary unless the host controller has special DMA requirements,
- * such as alignment contraints. If these are not specified, the
+ * such as alignment constraints. If these are not specified, the
* general usb_hcd_(un)?map_urb_for_dma functions will be used instead
* (and it may be a good idea to call these functions in your HCD
* implementation)
@@ -98,7 +98,7 @@ enum otg_fsm_timer {
* @b_bus_req: TRUE during the time that the Application running on the
* B-device wants to use the bus
*
- * Auxilary inputs (OTG v1.3 only. Obsolete now.)
+ * Auxiliary inputs (OTG v1.3 only. Obsolete now.)
* @a_sess_vld: TRUE if the A-device detects that VBUS is above VA_SESS_VLD
* @b_bus_suspend: TRUE when the A-device detects that the B-device has put
* the bus into suspend
@@ -153,7 +153,7 @@ struct otg_fsm {
int a_bus_req;
int b_bus_req;
- /* Auxilary inputs */
+ /* Auxiliary inputs */
int a_sess_vld;
int b_bus_resume;
int b_bus_suspend;
@@ -177,7 +177,7 @@ struct otg_fsm {
int a_bus_req_inf;
int a_clr_err_inf;
int b_bus_req_inf;
- /* Auxilary informative variables */
+ /* Auxiliary informative variables */
int a_suspend_req_inf;
/* Timeout indicator for timers */
@@ -125,7 +125,7 @@ enum usb_dr_mode {
* @dev: Pointer to the given device
*
* The function gets phy interface string from property 'dr_mode',
- * and returns the correspondig enum usb_dr_mode
+ * and returns the corresponding enum usb_dr_mode
*/
extern enum usb_dr_mode usb_get_dr_mode(struct device *dev);
@@ -32,7 +32,7 @@
#define USB_QUIRK_DELAY_INIT BIT(6)
/*
- * For high speed and super speed interupt endpoints, the USB 2.0 and
+ * For high speed and super speed interrupt endpoints, the USB 2.0 and
* USB 3.0 spec require the interval in microframes
* (1 microframe = 125 microseconds) to be calculated as
* interval = 2 ^ (bInterval-1).
@@ -395,7 +395,7 @@ static inline void usb_serial_debug_data(struct device *dev,
}
/*
- * Macro for reporting errors in write path to avoid inifinite loop
+ * Macro for reporting errors in write path to avoid infinite loop
* when port is used as a console.
*/
#define dev_err_console(usport, fmt, ...) \
@@ -97,7 +97,7 @@ enum {
#define DP_CONF_PIN_ASSIGNEMENT_SHIFT 8
#define DP_CONF_PIN_ASSIGNEMENT_MASK GENMASK(15, 8)
-/* Helper for setting/getting the pin assignement value to the configuration */
+/* Helper for setting/getting the pin assignment value to the configuration */
#define DP_CONF_SET_PIN_ASSIGN(_a_) ((_a_) << 8)
#define DP_CONF_GET_PIN_ASSIGN(_conf_) (((_conf_) & GENMASK(15, 8)) >> 8)
Fix some spelling mistakes in comments: trasfer ==> transfer consumtion ==> consumption endoint ==> endpoint sharable ==> shareable contraints ==> constraints Auxilary ==> Auxiliary correspondig ==> corresponding interupt ==> interrupt inifinite ==> infinite assignement ==> assignment Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> --- include/linux/usb.h | 2 +- include/linux/usb/composite.h | 2 +- include/linux/usb/gadget.h | 2 +- include/linux/usb/hcd.h | 4 ++-- include/linux/usb/otg-fsm.h | 6 +++--- include/linux/usb/otg.h | 2 +- include/linux/usb/quirks.h | 2 +- include/linux/usb/serial.h | 2 +- include/linux/usb/typec_dp.h | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-) -- 2.25.1