| Message ID | 20210516132209.59229-1-juergh@canonical.com |
|---|---|
| State | New |
| Headers | show |
| Series | treewide: Remove leading spaces in Kconfig files | expand |
On Sun, May 16, 2021 at 03:22:09PM +0200, Juerg Haefliger wrote: > There are a few occurences of leading spaces before tabs in a couple of > Kconfig files. Remove them by running the following command: > > $ find . -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/' > > Signed-off-by: Juerg Haefliger <juergh@canonical.com> > --- > arch/arm/mach-omap1/Kconfig | 12 ++++++------ > arch/arm/mach-vt8500/Kconfig | 6 +++--- > arch/arm/mm/Kconfig | 10 +++++----- > drivers/char/hw_random/Kconfig | 8 ++++---- > drivers/net/usb/Kconfig | 10 +++++----- > drivers/net/wan/Kconfig | 4 ++-- > drivers/scsi/Kconfig | 2 +- > drivers/uio/Kconfig | 2 +- > drivers/video/backlight/Kconfig | 10 +++++----- > drivers/virtio/Kconfig | 2 +- > drivers/w1/masters/Kconfig | 6 +++--- > fs/proc/Kconfig | 4 ++-- > init/Kconfig | 2 +- > net/netfilter/Kconfig | 2 +- > net/netfilter/ipvs/Kconfig | 2 +- > 15 files changed, 41 insertions(+), 41 deletions(-) Please break this up into one patch per subsystem and resend to the proper maintainers that way. thanks, greg k-h
On Mon, May 17, 2021 at 7:46 AM Greg KH <gregkh@linuxfoundation.org> wrote: > > On Sun, May 16, 2021 at 03:22:09PM +0200, Juerg Haefliger wrote: > > There are a few occurences of leading spaces before tabs in a couple of > > Kconfig files. Remove them by running the following command: > > > > $ find . -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/' > > > > Signed-off-by: Juerg Haefliger <juergh@canonical.com> > > --- > > arch/arm/mach-omap1/Kconfig | 12 ++++++------ > > arch/arm/mach-vt8500/Kconfig | 6 +++--- > > arch/arm/mm/Kconfig | 10 +++++----- > > drivers/char/hw_random/Kconfig | 8 ++++---- > > drivers/net/usb/Kconfig | 10 +++++----- > > drivers/net/wan/Kconfig | 4 ++-- > > drivers/scsi/Kconfig | 2 +- > > drivers/uio/Kconfig | 2 +- > > drivers/video/backlight/Kconfig | 10 +++++----- > > drivers/virtio/Kconfig | 2 +- > > drivers/w1/masters/Kconfig | 6 +++--- > > fs/proc/Kconfig | 4 ++-- > > init/Kconfig | 2 +- > > net/netfilter/Kconfig | 2 +- > > net/netfilter/ipvs/Kconfig | 2 +- > > 15 files changed, 41 insertions(+), 41 deletions(-) > > Please break this up into one patch per subsystem and resend to the > proper maintainers that way. Hmm... How is my patch different from other treewide Kconfig cleanup patches like: a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'") 8636a1f9677d ("treewide: surround Kconfig file paths with double quotes") 83fc61a563cb ("treewide: Fix typos in Kconfig") 769a12a9c760 ("treewide: Kconfig: fix wording / spelling") f54619f28fb6 ("treewide: Fix typos in Kconfig") ...Juerg > thanks, > > greg k-h
On Mon, May 17, 2021 at 10:07:43AM +0200, Juerg Haefliger wrote: > On Mon, May 17, 2021 at 7:46 AM Greg KH <gregkh@linuxfoundation.org> wrote: > > > > On Sun, May 16, 2021 at 03:22:09PM +0200, Juerg Haefliger wrote: > > > There are a few occurences of leading spaces before tabs in a couple of > > > Kconfig files. Remove them by running the following command: > > > > > > $ find . -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/' > > > > > > Signed-off-by: Juerg Haefliger <juergh@canonical.com> > > > --- > > > arch/arm/mach-omap1/Kconfig | 12 ++++++------ > > > arch/arm/mach-vt8500/Kconfig | 6 +++--- > > > arch/arm/mm/Kconfig | 10 +++++----- > > > drivers/char/hw_random/Kconfig | 8 ++++---- > > > drivers/net/usb/Kconfig | 10 +++++----- > > > drivers/net/wan/Kconfig | 4 ++-- > > > drivers/scsi/Kconfig | 2 +- > > > drivers/uio/Kconfig | 2 +- > > > drivers/video/backlight/Kconfig | 10 +++++----- > > > drivers/virtio/Kconfig | 2 +- > > > drivers/w1/masters/Kconfig | 6 +++--- > > > fs/proc/Kconfig | 4 ++-- > > > init/Kconfig | 2 +- > > > net/netfilter/Kconfig | 2 +- > > > net/netfilter/ipvs/Kconfig | 2 +- > > > 15 files changed, 41 insertions(+), 41 deletions(-) > > > > Please break this up into one patch per subsystem and resend to the > > proper maintainers that way. > > Hmm... How is my patch different from other treewide Kconfig cleanup > patches like: > a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'") > 8636a1f9677d ("treewide: surround Kconfig file paths with double quotes") > 83fc61a563cb ("treewide: Fix typos in Kconfig") > 769a12a9c760 ("treewide: Kconfig: fix wording / spelling") > f54619f28fb6 ("treewide: Fix typos in Kconfig") Ok, I'll just ignore this and not try to suggest a way for you to get your change accepted... greg k-h
On Mon, 17 May 2021 10:17:38 +0200 Greg KH <gregkh@linuxfoundation.org> wrote: > On Mon, May 17, 2021 at 10:07:43AM +0200, Juerg Haefliger wrote: > > On Mon, May 17, 2021 at 7:46 AM Greg KH <gregkh@linuxfoundation.org> wrote: > > > > > > On Sun, May 16, 2021 at 03:22:09PM +0200, Juerg Haefliger wrote: > > > > There are a few occurences of leading spaces before tabs in a couple of > > > > Kconfig files. Remove them by running the following command: > > > > > > > > $ find . -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/' > > > > > > > > Signed-off-by: Juerg Haefliger <juergh@canonical.com> > > > > --- > > > > arch/arm/mach-omap1/Kconfig | 12 ++++++------ > > > > arch/arm/mach-vt8500/Kconfig | 6 +++--- > > > > arch/arm/mm/Kconfig | 10 +++++----- > > > > drivers/char/hw_random/Kconfig | 8 ++++---- > > > > drivers/net/usb/Kconfig | 10 +++++----- > > > > drivers/net/wan/Kconfig | 4 ++-- > > > > drivers/scsi/Kconfig | 2 +- > > > > drivers/uio/Kconfig | 2 +- > > > > drivers/video/backlight/Kconfig | 10 +++++----- > > > > drivers/virtio/Kconfig | 2 +- > > > > drivers/w1/masters/Kconfig | 6 +++--- > > > > fs/proc/Kconfig | 4 ++-- > > > > init/Kconfig | 2 +- > > > > net/netfilter/Kconfig | 2 +- > > > > net/netfilter/ipvs/Kconfig | 2 +- > > > > 15 files changed, 41 insertions(+), 41 deletions(-) > > > > > > Please break this up into one patch per subsystem and resend to the > > > proper maintainers that way. > > > > Hmm... How is my patch different from other treewide Kconfig cleanup > > patches like: > > a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'") > > 8636a1f9677d ("treewide: surround Kconfig file paths with double quotes") > > 83fc61a563cb ("treewide: Fix typos in Kconfig") > > 769a12a9c760 ("treewide: Kconfig: fix wording / spelling") > > f54619f28fb6 ("treewide: Fix typos in Kconfig") > > Ok, I'll just ignore this and not try to suggest a way for you to get > your change accepted... No worries. I can make the change, was just wondering... ...Juerg > greg k-h
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 9536b8f3c07d..208c700c2455 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -65,14 +65,14 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP16XX - help + help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP16XX - help + help TI OMAP 1710 H3 board support. Say Y here if you have such a board. @@ -85,14 +85,14 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP16XX - help + help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. config OMAP_OSK_MISTRAL bool "Mistral QVGA board Support" depends on MACH_OMAP_OSK - help + help The OSK supports an optional add-on board with a Quarter-VGA touchscreen, PDA-ish buttons, a resume button, bicolor LED, and camera connector. Say Y here if you have this board. @@ -100,14 +100,14 @@ config OMAP_OSK_MISTRAL config MACH_OMAP_PERSEUS2 bool "TI Perseus2" depends on ARCH_OMAP730 - help + help Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board. config MACH_OMAP_FSAMPLE bool "TI F-Sample" depends on ARCH_OMAP730 - help + help Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index d01cdd9ad9c7..408e405ae568 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -9,9 +9,9 @@ config ARCH_VT8500 config ARCH_WM8505 bool "VIA/Wondermedia 85xx and WM8650" - depends on ARCH_MULTI_V5 - select ARCH_VT8500 - select CPU_ARM926T + depends on ARCH_MULTI_V5 + select ARCH_VT8500 + select CPU_ARM926T config ARCH_WM8750 bool "WonderMedia WM8750" diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 35f43d0aa056..7a4a04bafa92 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -123,13 +123,13 @@ config CPU_ARM925T select CPU_PABRT_LEGACY select CPU_THUMB_CAPABLE select CPU_TLB_V4WBI if MMU - help - The ARM925T is a mix between the ARM920T and ARM926T, but with + help + The ARM925T is a mix between the ARM920T and ARM926T, but with different instruction and data caches. It is used in TI's OMAP - device family. + device family. - Say Y if you want support for the ARM925T processor. - Otherwise, say N. + Say Y if you want support for the ARM925T processor. + Otherwise, say N. # ARM926T config CPU_ARM926T diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 1fe006f3f12f..0e1e97680f08 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -168,14 +168,14 @@ config HW_RANDOM_OMAP depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU default HW_RANDOM help - This driver provides kernel-side support for the Random Number + This driver provides kernel-side support for the Random Number Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx multimedia processors, and Marvell Armada 7k/8k SoCs. To compile this driver as a module, choose M here: the module will be called omap-rng. - If unsure, say Y. + If unsure, say Y. config HW_RANDOM_OMAP3_ROM tristate "OMAP3 ROM Random Number Generator support" @@ -485,13 +485,13 @@ config HW_RANDOM_NPCM depends on ARCH_NPCM || COMPILE_TEST default HW_RANDOM help - This driver provides support for the Random Number + This driver provides support for the Random Number Generator hardware available in Nuvoton NPCM SoCs. To compile this driver as a module, choose M here: the module will be called npcm-rng. - If unsure, say Y. + If unsure, say Y. config HW_RANDOM_KEYSTONE depends on ARCH_KEYSTONE || COMPILE_TEST diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index fbbe78643631..179308782888 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -169,7 +169,7 @@ config USB_NET_AX8817X This option adds support for ASIX AX88xxx based USB 2.0 10/100 Ethernet adapters. - This driver should work with at least the following devices: + This driver should work with at least the following devices: * Aten UC210T * ASIX AX88172 * Billionton Systems, USB2AR @@ -220,13 +220,13 @@ config USB_NET_CDCETHER CDC Ethernet is an implementation option for DOCSIS cable modems that support USB connectivity, used for non-Microsoft USB hosts. The Linux-USB CDC Ethernet Gadget driver is an open implementation. - This driver should work with at least the following devices: + This driver should work with at least the following devices: * Dell Wireless 5530 HSPA - * Ericsson PipeRider (all variants) + * Ericsson PipeRider (all variants) * Ericsson Mobile Broadband Module (all variants) - * Motorola (DM100 and SB4100) - * Broadcom Cable Modem (reference design) + * Motorola (DM100 and SB4100) + * Broadcom Cable Modem (reference design) * Toshiba (PCX1100U and F3507g/F3607gw) * ... diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 83c9481995dd..473df2505c8e 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -49,7 +49,7 @@ config COSA network device. You will need user-space utilities COSA or SRP boards for downloading - the firmware to the cards and to set them up. Look at the + the firmware to the cards and to set them up. Look at the <http://www.fi.muni.cz/~kas/cosa/> for more information. You can also read the comment at the top of the <file:drivers/net/wan/cosa.c> for details about the cards and the driver itself. @@ -108,7 +108,7 @@ config HDLC Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame Relay, synchronous Point-to-Point Protocol (PPP) and X.25. - To compile this driver as a module, choose M here: the + To compile this driver as a module, choose M here: the module will be called hdlc. If unsure, say N. diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 3d114be5b662..c5612896cdb9 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -311,7 +311,7 @@ source "drivers/scsi/cxlflash/Kconfig" config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" depends on SGI_HAS_WD93 && SCSI - help + help If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 5531f3afeb21..2e16c5338e5b 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -18,7 +18,7 @@ config UIO_CIF depends on PCI help Driver for Hilscher CIF DeviceNet and Profibus cards. This - driver requires a userspace component called cif that handles + driver requires a userspace component called cif that handles all of the heavy lifting and can be found at: <http://www.osadl.org/projects/downloads/UIO/user/> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index d83c87b902c1..a967974f6cd6 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -129,11 +129,11 @@ config LCD_HX8357 driver. config LCD_OTM3225A - tristate "ORISE Technology OTM3225A support" - depends on SPI - help - If you have a panel based on the OTM3225A controller - chip then say y to include a driver for it. + tristate "ORISE Technology OTM3225A support" + depends on SPI + help + If you have a panel based on the OTM3225A controller + chip then say y to include a driver for it. endif # LCD_CLASS_DEVICE diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index ce1b3f6ec325..3b3644d60d11 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -128,7 +128,7 @@ config VIRTIO_MMIO This drivers provides support for memory mapped virtio platform device driver. - If unsure, say N. + If unsure, say N. config VIRTIO_MMIO_CMDLINE_DEVICES bool "Memory mapped virtio devices parameter parsing" diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 24b9a8e05f64..32e993ea6f96 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -17,12 +17,12 @@ config W1_MASTER_MATROX config W1_MASTER_DS2490 tristate "DS2490 USB <-> W1 transport layer for 1-wire" - depends on USB - help + depends on USB + help Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges, for example DS9490*. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called ds2490. config W1_MASTER_DS2482 diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig index c930001056f9..e8410a99a0ca 100644 --- a/fs/proc/Kconfig +++ b/fs/proc/Kconfig @@ -81,10 +81,10 @@ config PROC_SYSCTL limited in memory. config PROC_PAGE_MONITOR - default y + default y depends on PROC_FS && MMU bool "Enable /proc page monitoring" if EXPERT - help + help Various /proc files exist to monitor process memory utilization: /proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap, /proc/kpagecount, and /proc/kpageflags. Disabling these diff --git a/init/Kconfig b/init/Kconfig index 1ea12c64e4c9..9f1cde503739 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2149,7 +2149,7 @@ config MODULE_SRCVERSION_ALL help Modules which contain a MODULE_VERSION get an extra "srcversion" field inserted into their modinfo section, which contains a - sum of the source files which made it. This helps maintainers + sum of the source files which made it. This helps maintainers see exactly which source was used to build a module (since others sometimes change the module source without updating the version). With this option, such a "srcversion" field diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 56a2531a3402..172d74560632 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -816,7 +816,7 @@ config NETFILTER_XT_TARGET_CLASSIFY the priority of a packet. Some qdiscs can use this value for classification, among these are: - atm, cbq, dsmark, pfifo_fast, htb, prio + atm, cbq, dsmark, pfifo_fast, htb, prio To compile it as a module, choose M here. If unsure, say N. diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig index d61886874940..271da8447b29 100644 --- a/net/netfilter/ipvs/Kconfig +++ b/net/netfilter/ipvs/Kconfig @@ -318,7 +318,7 @@ config IP_VS_MH_TAB_INDEX comment 'IPVS application helper' config IP_VS_FTP - tristate "FTP protocol helper" + tristate "FTP protocol helper" depends on IP_VS_PROTO_TCP && NF_CONNTRACK && NF_NAT && \ NF_CONNTRACK_FTP select IP_VS_NFCT
There are a few occurences of leading spaces before tabs in a couple of Kconfig files. Remove them by running the following command: $ find . -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by: Juerg Haefliger <juergh@canonical.com> --- arch/arm/mach-omap1/Kconfig | 12 ++++++------ arch/arm/mach-vt8500/Kconfig | 6 +++--- arch/arm/mm/Kconfig | 10 +++++----- drivers/char/hw_random/Kconfig | 8 ++++---- drivers/net/usb/Kconfig | 10 +++++----- drivers/net/wan/Kconfig | 4 ++-- drivers/scsi/Kconfig | 2 +- drivers/uio/Kconfig | 2 +- drivers/video/backlight/Kconfig | 10 +++++----- drivers/virtio/Kconfig | 2 +- drivers/w1/masters/Kconfig | 6 +++--- fs/proc/Kconfig | 4 ++-- init/Kconfig | 2 +- net/netfilter/Kconfig | 2 +- net/netfilter/ipvs/Kconfig | 2 +- 15 files changed, 41 insertions(+), 41 deletions(-)