diff mbox series

[5/5] arm64: dts: qcom: msm8916-huawei-g7: Add NFC

Message ID 20210514104328.18756-5-stephan@gerhold.net
State New
Headers show
Series None | expand

Commit Message

Stephan Gerhold May 14, 2021, 10:43 a.m. UTC 
The Huawei Ascend G7 supports NFC using the NXP PN547, which is
supported by the nxp-nci-i2c driver in mainline. It seems to detect
NFC tags using "nfctool" just fine, although it seems like there
are not really any useful applications making use of the Linux NFC
subsystem. :(

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 5ad4e921b110..e0075b574190 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -193,6 +193,24 @@  rmi4-f11@11 {
 	};
 };
 
+&blsp_i2c6 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_default>;
+	};
+};
+
 &blsp1_uart2 {
 	status = "okay";
 };
@@ -378,6 +396,14 @@  gpio_leds_default: gpio-leds-default {
 		bias-disable;
 	};
 
+	nfc_default: nfc-default {
+		pins = "gpio2", "gpio20", "gpio21";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	mag_reset_default: mag-reset-default {
 		pins = "gpio36";
 		function = "gpio";