diff mbox

[V9,5/5] MX53 Enable the AHCI SATA on MX53 SMD board

Message ID 1317195717-21174-6-git-send-email-richard.zhu@linaro.org
State Accepted
Headers show

Commit Message

Richard Zhu Sept. 28, 2011, 7:41 a.m. UTC 
Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
---
 arch/arm/mach-mx5/board-mx53_smd.c |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894..efcab68 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -35,6 +35,7 @@ 
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,6 +112,19 @@  static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+	int ret;
+
+	/* Enable SATA PWR */
+	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+	if (ret) {
+		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+		return;
+	}
+}
+
 static void __init mx53_smd_board_init(void)
 {
 	imx53_soc_init();
@@ -125,6 +139,8 @@  static void __init mx53_smd_board_init(void)
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	mx53_smd_ahci_pwr_on();
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_smd_timer_init(void)