@@ -104,6 +104,16 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
{
int ret;
+ /*
+ * This may be a shared rail and may be able to run at a lower rate
+ * when we're not blowing fuses. At the moment, the regulator framework
+ * applies voltage constraints even on disabled rails, so remove our
+ * constraints and allow the rail to be adjusted by other users.
+ */
+ ret = regulator_set_voltage(priv->vcc, 0, INT_MAX);
+ if (ret)
+ dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n");
+
ret = regulator_disable(priv->vcc);
if (ret)
dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
@@ -149,6 +159,17 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
goto err_clk_prepared;
}
+ /*
+ * Hardware requires 1.8V min for fuse blowing; this may be
+ * a rail shared do don't specify a max--regulator constraints
+ * will handle.
+ */
+ ret = regulator_set_voltage(priv->vcc, 1800000, INT_MAX);
+ if (ret) {
+ dev_err(priv->dev, "Failed to set 1.8 voltage\n");
+ goto err_clk_rate_set;
+ }
+
ret = regulator_enable(priv->vcc);
if (ret) {
dev_err(priv->dev, "Failed to enable regulator\n");