diff mbox series

[5.11,172/601] ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control

Message ID 20210512144833.506071268@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH May 12, 2021, 2:44 p.m. UTC 
From: Valentin CARON - foss <valentin.caron@foss.st.com>

[ Upstream commit a1429f3d3029b65cd4032f6218d5290911377ce4 ]

Modify usart 2 & 3 pins to allow wake up from low power mode while the
hardware flow control is activated. UART RTS pin need to stay configure
in idle mode to receive characters in order to wake up.

Fixes: 842ed898a757 ("ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl")

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 20a59e8f7a33..f10a740ca3c1 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1868,10 +1868,15 @@ 
 	usart2_idle_pins_c: usart2-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
 				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
 			bias-disable;
 		};
@@ -1917,10 +1922,15 @@ 
 	usart3_idle_pins_b: usart3-idle-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
@@ -1953,10 +1963,15 @@ 
 	usart3_idle_pins_c: usart3-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};