diff mbox series

[5.12,236/677] arm64: dts: qcom: sm8250: fix display nodes

Message ID 20210512144845.082352848@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH May 12, 2021, 2:44 p.m. UTC
From: Jonathan Marek <jonathan@marek.ca>

[ Upstream commit 888771a9d04ff7bf96e5ecad37969002c88a95d7 ]

Apply these fixes to the newly added sm8250 display ndoes
 - Remove "notused" interconnect (which apparently was blindly copied from
   my old patches)
 - Use dispcc node example from dt-bindings, removing clocks which aren't
   documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[DB: compatibility changes split into separate patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210329120051.3401567-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 27 ++++++---------------------
 1 file changed, 6 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c30872c94686..46a6c18cea91 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2327,10 +2327,9 @@ 
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-					<&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
 					<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-			interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+			interconnect-names = "mdp0-mem", "mdp1-mem";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -2580,7 +2579,7 @@ 
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm8250-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0 0x0af00000 0 0x10000>;
 			mmcx-supply = <&mmcx_reg>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ 
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <&sleep_clk>;
+				 <0>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
 				      "dsi1_phy_pll_out_byteclk",
 				      "dsi1_phy_pll_out_dsiclk",
-				      "dp_link_clk_divsel_ten",
-				      "dp_vco_divided_clk_src_mux",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
-				      "dptx2_phy_pll_link_clk",
-				      "dptx2_phy_pll_vco_div_clk",
-				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk",
-				      "sleep_clk";
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;