diff mbox series

[v2,2/3] mmc: sdhci-esdhc-imx: advertise HS400 mode through MMC caps

Message ID 20210510190400.105162-2-l.stach@pengutronix.de
State New
Headers show
Series None | expand

Commit Message

Lucas Stach May 10, 2021, 7:03 p.m. UTC
Instead of having an indirection through the SDHCI layer and emulating
a capability bit, that isn't there in hardware, do the same same thing
as with HS400_ES and advertise the support for HS400 directly through
the MMC caps.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

Comments

Lucas Stach May 11, 2021, 8:18 a.m. UTC | #1
Am Dienstag, dem 11.05.2021 um 03:00 +0000 schrieb Bough Chen:
> > -----Original Message-----

> > From: Lucas Stach [mailto:l.stach@pengutronix.de]

> > Sent: 2021年5月11日 3:04

> > To: Ulf Hansson <ulf.hansson@linaro.org>; Adrian Hunter

> > <adrian.hunter@intel.com>; Bough Chen <haibo.chen@nxp.com>

> > Cc: Rob Herring <robh+dt@kernel.org>; dl-linux-imx <linux-imx@nxp.com>;

> > kernel@pengutronix.de; linux-mmc@vger.kernel.org;

> > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org

> > Subject: [PATCH v2 2/3] mmc: sdhci-esdhc-imx: advertise HS400 mode through

> > MMC caps

> > 

> > Instead of having an indirection through the SDHCI layer and emulating a

> > capability bit, that isn't there in hardware, do the same same thing as

> with

> > HS400_ES and advertise the support for HS400 directly through the MMC

> caps.

> > 

> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

> > ---

> >  drivers/mmc/host/sdhci-esdhc-imx.c | 5 +----

> >  1 file changed, 1 insertion(+), 4 deletions(-)

> > 

> > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c

> > b/drivers/mmc/host/sdhci-esdhc-imx.c

> > index a20459744d21..65a52586db36 100644

> > --- a/drivers/mmc/host/sdhci-esdhc-imx.c

> > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c

> > @@ -427,9 +427,6 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int

> > reg)

> >  					|

> FIELD_PREP(SDHCI_RETUNING_MODE_MASK,

> >  						     SDHCI_TUNING_MODE_3);

> > 

> > -			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)

> > -				val |= SDHCI_SUPPORT_HS400;

> > -

> >  			/*

> >  			 * Do not advertise faster UHS modes if there are no

> >  			 * pinctrl states for 100MHz/200MHz.

> > @@ -1603,7 +1600,7 @@ static int sdhci_esdhc_imx_probe(struct

> > platform_device *pdev)

> >  		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;

> > 

> >  	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)

> > -		host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;

> > +		host->mmc->caps2 |= MMC_CAP2_HS400;

> 

> Hi Lucas,

> 

> I think patch1 and patch 2 are enough to cover your requirement.

> For this patch, I think it's unnecessary, sdhci-esdhc-imx.c need to reuse

> sdhci.c as much as possible.

> In sdhci.c, already contain the following logic. 

> 

>          if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&

>              (host->caps1 & SDHCI_SUPPORT_HS400))

>                  mmc->caps2 |= MMC_CAP2_HS400;

> 

> The reason why we directly use host->mmc->caps2 for HS400ES mode is that

> sdhci.c do not contain the similar logic.


No, it's not enough. We call mmc_of_parse(), which clears the HS400
flags, before sdhci_setup_host() is called, which will then add the
HS400 flags again. So either I still need to evaluate the DT property
in the esdhc driver to make it return the right emulated SDHCI caps bit
for the HS400 case, or do it like in this patch.

While the way it is done here is a bit of a layering violation between
SDHCI and MMC, it still feels like the cleaner and more straight
forward solution.

Regards,
Lucas
Adrian Hunter May 11, 2021, 12:40 p.m. UTC | #2
On 11/05/21 11:18 am, Lucas Stach wrote:
> Am Dienstag, dem 11.05.2021 um 03:00 +0000 schrieb Bough Chen:
>>> -----Original Message-----
>>> From: Lucas Stach [mailto:l.stach@pengutronix.de]
>>> Sent: 2021年5月11日 3:04
>>> To: Ulf Hansson <ulf.hansson@linaro.org>; Adrian Hunter
>>> <adrian.hunter@intel.com>; Bough Chen <haibo.chen@nxp.com>
>>> Cc: Rob Herring <robh+dt@kernel.org>; dl-linux-imx <linux-imx@nxp.com>;
>>> kernel@pengutronix.de; linux-mmc@vger.kernel.org;
>>> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org
>>> Subject: [PATCH v2 2/3] mmc: sdhci-esdhc-imx: advertise HS400 mode through
>>> MMC caps
>>>
>>> Instead of having an indirection through the SDHCI layer and emulating a
>>> capability bit, that isn't there in hardware, do the same same thing as
>> with
>>> HS400_ES and advertise the support for HS400 directly through the MMC
>> caps.
>>>
>>> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
>>> ---
>>>  drivers/mmc/host/sdhci-esdhc-imx.c | 5 +----
>>>  1 file changed, 1 insertion(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
>>> b/drivers/mmc/host/sdhci-esdhc-imx.c
>>> index a20459744d21..65a52586db36 100644
>>> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
>>> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
>>> @@ -427,9 +427,6 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int
>>> reg)
>>>  					|
>> FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
>>>  						     SDHCI_TUNING_MODE_3);
>>>
>>> -			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
>>> -				val |= SDHCI_SUPPORT_HS400;
>>> -
>>>  			/*
>>>  			 * Do not advertise faster UHS modes if there are no
>>>  			 * pinctrl states for 100MHz/200MHz.
>>> @@ -1603,7 +1600,7 @@ static int sdhci_esdhc_imx_probe(struct
>>> platform_device *pdev)
>>>  		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
>>>
>>>  	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
>>> -		host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
>>> +		host->mmc->caps2 |= MMC_CAP2_HS400;
>>
>> Hi Lucas,
>>
>> I think patch1 and patch 2 are enough to cover your requirement.
>> For this patch, I think it's unnecessary, sdhci-esdhc-imx.c need to reuse
>> sdhci.c as much as possible.
>> In sdhci.c, already contain the following logic. 
>>
>>          if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&
>>              (host->caps1 & SDHCI_SUPPORT_HS400))
>>                  mmc->caps2 |= MMC_CAP2_HS400;
>>
>> The reason why we directly use host->mmc->caps2 for HS400ES mode is that
>> sdhci.c do not contain the similar logic.
> 
> No, it's not enough. We call mmc_of_parse(), which clears the HS400
> flags, before sdhci_setup_host() is called, which will then add the
> HS400 flags again. So either I still need to evaluate the DT property
> in the esdhc driver to make it return the right emulated SDHCI caps bit
> for the HS400 case, or do it like in this patch.
> 
> While the way it is done here is a bit of a layering violation between

We see SDHCI as more of a library, not a layer, so this is OK

> SDHCI and MMC, it still feels like the cleaner and more straight
> forward solution.
> 
> Regards,
> Lucas
>
Bough Chen May 12, 2021, 2:23 a.m. UTC | #3
> -----Original Message-----
> From: Adrian Hunter [mailto:adrian.hunter@intel.com]
> Sent: 2021年5月11日 20:41
> To: Lucas Stach <l.stach@pengutronix.de>; Bough Chen
> <haibo.chen@nxp.com>; Ulf Hansson <ulf.hansson@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>; dl-linux-imx <linux-imx@nxp.com>;
> kernel@pengutronix.de; linux-mmc@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH v2 2/3] mmc: sdhci-esdhc-imx: advertise HS400 mode
> through MMC caps
> 
> On 11/05/21 11:18 am, Lucas Stach wrote:
> > Am Dienstag, dem 11.05.2021 um 03:00 +0000 schrieb Bough Chen:
> >>> -----Original Message-----
> >>> From: Lucas Stach [mailto:l.stach@pengutronix.de]
> >>> Sent: 2021年5月11日 3:04
> >>> To: Ulf Hansson <ulf.hansson@linaro.org>; Adrian Hunter
> >>> <adrian.hunter@intel.com>; Bough Chen <haibo.chen@nxp.com>
> >>> Cc: Rob Herring <robh+dt@kernel.org>; dl-linux-imx
> >>> <linux-imx@nxp.com>; kernel@pengutronix.de;
> >>> linux-mmc@vger.kernel.org; devicetree@vger.kernel.org;
> >>> linux-arm-kernel@lists.infradead.org
> >>> Subject: [PATCH v2 2/3] mmc: sdhci-esdhc-imx: advertise HS400 mode
> >>> through MMC caps
> >>>
> >>> Instead of having an indirection through the SDHCI layer and
> >>> emulating a capability bit, that isn't there in hardware, do the
> >>> same same thing as
> >> with
> >>> HS400_ES and advertise the support for HS400 directly through the
> >>> MMC
> >> caps.
> >>>
> >>> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> >>> ---
> >>>  drivers/mmc/host/sdhci-esdhc-imx.c | 5 +----
> >>>  1 file changed, 1 insertion(+), 4 deletions(-)
> >>>
> >>> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
> >>> b/drivers/mmc/host/sdhci-esdhc-imx.c
> >>> index a20459744d21..65a52586db36 100644
> >>> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> >>> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> >>> @@ -427,9 +427,6 @@ static u32 esdhc_readl_le(struct sdhci_host
> >>> *host, int
> >>> reg)
> >>>  					|
> >> FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
> >>>  						     SDHCI_TUNING_MODE_3);
> >>>
> >>> -			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
> >>> -				val |= SDHCI_SUPPORT_HS400;
> >>> -
> >>>  			/*
> >>>  			 * Do not advertise faster UHS modes if there are no
> >>>  			 * pinctrl states for 100MHz/200MHz.
> >>> @@ -1603,7 +1600,7 @@ static int sdhci_esdhc_imx_probe(struct
> >>> platform_device *pdev)
> >>>  		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
> >>>
> >>>  	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
> >>> -		host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
> >>> +		host->mmc->caps2 |= MMC_CAP2_HS400;
> >>
> >> Hi Lucas,
> >>
> >> I think patch1 and patch 2 are enough to cover your requirement.
> >> For this patch, I think it's unnecessary, sdhci-esdhc-imx.c need to
> >> reuse sdhci.c as much as possible.
> >> In sdhci.c, already contain the following logic.
> >>
> >>          if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400
> &&
> >>              (host->caps1 & SDHCI_SUPPORT_HS400))
> >>                  mmc->caps2 |= MMC_CAP2_HS400;
> >>
> >> The reason why we directly use host->mmc->caps2 for HS400ES mode is
> >> that sdhci.c do not contain the similar logic.
> >
> > No, it's not enough. We call mmc_of_parse(), which clears the HS400
> > flags, before sdhci_setup_host() is called, which will then add the
> > HS400 flags again. So either I still need to evaluate the DT property
> > in the esdhc driver to make it return the right emulated SDHCI caps
> > bit for the HS400 case, or do it like in this patch.
> >
> > While the way it is done here is a bit of a layering violation between
> 
> We see SDHCI as more of a library, not a layer, so this is OK

Okay, I see.
For this patch:
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>

Regards
Haibo
> 
> > SDHCI and MMC, it still feels like the cleaner and more straight
> > forward solution.
> >
> > Regards,
> > Lucas
> >
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index a20459744d21..65a52586db36 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -427,9 +427,6 @@  static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 					| FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
 						     SDHCI_TUNING_MODE_3);
 
-			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
-				val |= SDHCI_SUPPORT_HS400;
-
 			/*
 			 * Do not advertise faster UHS modes if there are no
 			 * pinctrl states for 100MHz/200MHz.
@@ -1603,7 +1600,7 @@  static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
-		host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
+		host->mmc->caps2 |= MMC_CAP2_HS400;
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23)
 		host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN;