@@ -50,7 +50,7 @@ Description
This ioctl call asks the Audio Device to bypass the Audio decoder and
forward the stream without decoding. This mode shall be used if streams
-that can’t be handled by the Digital TV system shall be decoded. Dolby
+that can't be handled by the Digital TV system shall be decoded. Dolby
DigitalTM streams are automatically forwarded by the Digital TV subsystem if
the hardware can handle it.
@@ -11,7 +11,7 @@ TV hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
types and ioctl definitions can be accessed by including
``linux/dvb/audio.h`` in your application.
-Please note that some Digital TV cards don’t have their own MPEG decoder, which
+Please note that some Digital TV cards don't have their own MPEG decoder, which
results in the omission of the audio and video device.
These ioctls were also used by V4L2 to control MPEG decoders implemented
@@ -82,7 +82,7 @@ appropriately.
:widths: 1 16
- - ``EMFILE``
- - “Too many open files”, i.e. no more filters available.
+ - "Too many open files", i.e. no more filters available.
The generic error codes are described at the
:ref:`Generic Error Codes <gen-errors>` chapter.
@@ -34,7 +34,7 @@ Description
This system call returns filtered data, which might be section or Packetized
Elementary Stream (PES) data. The filtered data is transferred from
-the driver’s internal circular buffer to ``buf``. The maximum amount of data
+the driver's internal circular buffer to ``buf``. The maximum amount of data
to be transferred is implied by count.
.. note::
@@ -37,7 +37,7 @@ parameters provided. A timeout may be defined stating number of seconds
to wait for a section to be loaded. A value of 0 means that no timeout
should be applied. Finally there is a flag field where it is possible to
state whether a section should be CRC-checked, whether the filter should
-be a ”one-shot” filter, i.e. if the filtering operation should be
+be a "one-shot" filter, i.e. if the filtering operation should be
stopped after the first section is received, and whether the filtering
operation should be started immediately (without waiting for a
:ref:`DMX_START` ioctl call). If a filter was previously set-up, this
@@ -107,7 +107,7 @@ Audio and video decoder
a Systems on a Chip (SoC) integrated circuit.
It may also not be needed for certain usages (e.g. for data-only
- uses like “internet over satellite”).
+ uses like "internet over satellite").
:ref:`stb_components` shows a crude schematic of the control and data
flow between those components.
@@ -148,9 +148,9 @@ individual devices are called:
- ``/dev/dvb/adapterN/caM``,
-where ``N`` enumerates the Digital TV cards in a system starting from 0, and
+where ``N`` enumerates the Digital TV cards in a system starting from 0, and
``M`` enumerates the devices of each type within each adapter, starting
-from 0, too. We will omit the “``/dev/dvb/adapterN/``\ ” in the further
+from 0, too. We will omit the "``/dev/dvb/adapterN/``\ " in the further
discussion of these devices.
More details about the data structures and function calls of all the
@@ -16,7 +16,7 @@ stream, not its presentation on the TV or computer screen. On PCs this
is typically handled by an associated video4linux device, e.g.
**/dev/video**, which allows scaling and defining output windows.
-Some Digital TV cards don’t have their own MPEG decoder, which results in the
+Some Digital TV cards don't have their own MPEG decoder, which results in the
omission of the audio and video device as well as the video4linux
device.
While UTF-8 characters can be used at the Linux documentation, the best is to use them only when ASCII doesn't offer a good replacement. So, replace the occurences of the following UTF-8 characters: - U+00a0 (' '): NO-BREAK SPACE - U+2019 ('’'): RIGHT SINGLE QUOTATION MARK - U+201c ('“'): LEFT DOUBLE QUOTATION MARK - U+201d ('”'): RIGHT DOUBLE QUOTATION MARK Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../userspace-api/media/dvb/audio-set-bypass-mode.rst | 2 +- Documentation/userspace-api/media/dvb/audio.rst | 2 +- Documentation/userspace-api/media/dvb/dmx-fopen.rst | 2 +- Documentation/userspace-api/media/dvb/dmx-fread.rst | 2 +- Documentation/userspace-api/media/dvb/dmx-set-filter.rst | 2 +- Documentation/userspace-api/media/dvb/intro.rst | 6 +++--- Documentation/userspace-api/media/dvb/video.rst | 2 +- 7 files changed, 9 insertions(+), 9 deletions(-)