diff mbox series

[2/3] crypto: ixp4xx: Add DT bindings

Message ID 20210510213634.600866-2-linus.walleij@linaro.org
State New
Headers show
Series None | expand

Commit Message

Linus Walleij May 10, 2021, 9:36 p.m. UTC
This adds device tree bindings for the ixp4xx crypto engine.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
Herbert, David: This can be applied separately once we are
happy with the bindings, alternatively it can be merged
with the support code into ARM SoC.
---
 .../bindings/crypto/intel,ixp4xx-crypto.yaml  | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml

-- 
2.30.2

Comments

Rob Herring (Arm) May 11, 2021, 1:40 p.m. UTC | #1
On Mon, 10 May 2021 23:36:33 +0200, Linus Walleij wrote:
> This adds device tree bindings for the ixp4xx crypto engine.

> 

> Cc: devicetree@vger.kernel.org

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

> ---

> Herbert, David: This can be applied separately once we are

> happy with the bindings, alternatively it can be merged

> with the support code into ARM SoC.

> ---

>  .../bindings/crypto/intel,ixp4xx-crypto.yaml  | 59 +++++++++++++++++++

>  1 file changed, 59 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml

> 


My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.example.dt.yaml: npe@c8006000: 'crypto' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

See https://patchwork.ozlabs.org/patch/1476741

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) May 11, 2021, 4:16 p.m. UTC | #2
On Mon, May 10, 2021 at 11:36:33PM +0200, Linus Walleij wrote:
> This adds device tree bindings for the ixp4xx crypto engine.

> 

> Cc: devicetree@vger.kernel.org

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

> ---

> Herbert, David: This can be applied separately once we are

> happy with the bindings, alternatively it can be merged

> with the support code into ARM SoC.

> ---

>  .../bindings/crypto/intel,ixp4xx-crypto.yaml  | 59 +++++++++++++++++++

>  1 file changed, 59 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml

> 

> diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml

> new file mode 100644

> index 000000000000..28d75f4f9a76

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml

> @@ -0,0 +1,59 @@

> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

> +# Copyright 2018 Linaro Ltd.

> +%YAML 1.2

> +---

> +$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#"

> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

> +

> +title: Intel IXP4xx cryptographic engine

> +

> +maintainers:

> +  - Linus Walleij <linus.walleij@linaro.org>

> +

> +description: |

> +  The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE

> +  (Network Processing Engine). Since it is not a device on its own

> +  it is defined as a subnode of the NPE, if crypto support is

> +  available on the platform.

> +

> +properties:

> +  compatible:

> +    const: intel,ixp4xx-crypto

> +

> +  intel,npe-handle:

> +    $ref: '/schemas/types.yaml#/definitions/phandle-array'

> +    maxItems: 1

> +    description: phandle to the NPE this ethernet instance is using

> +      and the instance to use in the second cell

> +

> +  queue-rx:

> +    $ref: '/schemas/types.yaml#/definitions/phandle-array'

> +    maxItems: 1

> +    description: phandle to the RX queue on the NPE

> +

> +  queue-txready:

> +    $ref: '/schemas/types.yaml#/definitions/phandle-array'

> +    maxItems: 1

> +    description: phandle to the TX READY queue on the NPE

> +

> +required:

> +  - compatible

> +  - intel,npe-handle

> +  - queue-rx

> +  - queue-txready

> +

> +additionalProperties: false

> +

> +examples:

> +  - |

> +    npe: npe@c8006000 {

> +         compatible = "intel,ixp4xx-network-processing-engine";

> +         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;

> +

> +         crypto {


The parent schema needs to define 'crypto' and have a ref to this 
schema. I'd put the example there rather than piecemeal.

> +             compatible = "intel,ixp4xx-crypto";

> +             intel,npe-handle = <&npe 2>;


A bit redundant to have a phandle to the parent.

> +             queue-rx = <&qmgr 30>;

> +             queue-txready = <&qmgr 29>;

> +         };

> +    };

> -- 

> 2.30.2

>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
new file mode 100644
index 000000000000..28d75f4f9a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -0,0 +1,59 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx cryptographic engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE
+  (Network Processing Engine). Since it is not a device on its own
+  it is defined as a subnode of the NPE, if crypto support is
+  available on the platform.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-crypto
+
+  intel,npe-handle:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the NPE this ethernet instance is using
+      and the instance to use in the second cell
+
+  queue-rx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the RX queue on the NPE
+
+  queue-txready:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the TX READY queue on the NPE
+
+required:
+  - compatible
+  - intel,npe-handle
+  - queue-rx
+  - queue-txready
+
+additionalProperties: false
+
+examples:
+  - |
+    npe: npe@c8006000 {
+         compatible = "intel,ixp4xx-network-processing-engine";
+         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+
+         crypto {
+             compatible = "intel,ixp4xx-crypto";
+             intel,npe-handle = <&npe 2>;
+             queue-rx = <&qmgr 30>;
+             queue-txready = <&qmgr 29>;
+         };
+    };