@@ -1386,7 +1386,7 @@ static int __s5c73m3_power_on(struct s5c
s5c73m3_gpio_deassert(state, STBY);
usleep_range(100, 200);
- s5c73m3_gpio_deassert(state, RST);
+ s5c73m3_gpio_deassert(state, RSET);
usleep_range(50, 100);
return 0;
@@ -1401,7 +1401,7 @@ static int __s5c73m3_power_off(struct s5
{
int i, ret;
- if (s5c73m3_gpio_assert(state, RST))
+ if (s5c73m3_gpio_assert(state, RSET))
usleep_range(10, 50);
if (s5c73m3_gpio_assert(state, STBY))
@@ -1606,7 +1606,7 @@ static int s5c73m3_get_platform_data(str
state->mclk_frequency = pdata->mclk_frequency;
state->gpio[STBY] = pdata->gpio_stby;
- state->gpio[RST] = pdata->gpio_reset;
+ state->gpio[RSET] = pdata->gpio_reset;
return 0;
}
@@ -353,7 +353,7 @@ struct s5c73m3_ctrls {
enum s5c73m3_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
@@ -173,7 +173,7 @@ static const char * const s5k4ecgx_suppl
enum s5k4ecgx_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
@@ -476,7 +476,7 @@ static int __s5k4ecgx_power_on(struct s5
if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
usleep_range(30, 50);
- if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level))
+ if (s5k4ecgx_gpio_set_value(priv, RSET, priv->gpio[RSET].level))
usleep_range(30, 50);
return 0;
@@ -484,7 +484,7 @@ static int __s5k4ecgx_power_on(struct s5
static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
{
- if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level))
+ if (s5k4ecgx_gpio_set_value(priv, RSET, !priv->gpio[RSET].level))
usleep_range(30, 50);
if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
@@ -872,7 +872,7 @@ static int s5k4ecgx_config_gpios(struct
int ret;
priv->gpio[STBY].gpio = -EINVAL;
- priv->gpio[RST].gpio = -EINVAL;
+ priv->gpio[RSET].gpio = -EINVAL;
ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
@@ -891,7 +891,7 @@ static int s5k4ecgx_config_gpios(struct
s5k4ecgx_free_gpios(priv);
return ret;
}
- priv->gpio[RST] = *gpio;
+ priv->gpio[RSET] = *gpio;
if (gpio_is_valid(gpio->gpio))
gpio_set_value(gpio->gpio, 0);
@@ -235,7 +235,7 @@ struct s5k5baf_gpio {
enum s5k5baf_gpio_id {
STBY,
- RST,
+ RSET,
NUM_GPIOS,
};
@@ -969,7 +969,7 @@ static int s5k5baf_power_on(struct s5k5b
s5k5baf_gpio_deassert(state, STBY);
usleep_range(50, 100);
- s5k5baf_gpio_deassert(state, RST);
+ s5k5baf_gpio_deassert(state, RSET);
return 0;
err_reg_dis:
@@ -987,7 +987,7 @@ static int s5k5baf_power_off(struct s5k5
state->apply_cfg = 0;
state->apply_crop = 0;
- s5k5baf_gpio_assert(state, RST);
+ s5k5baf_gpio_assert(state, RSET);
s5k5baf_gpio_assert(state, STBY);
if (!IS_ERR(state->clock))
@@ -177,7 +177,7 @@ static const char * const s5k6aa_supply_
enum s5k6aa_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
@@ -841,7 +841,7 @@ static int __s5k6aa_power_on(struct s5k6
ret = s5k6aa->s_power(1);
usleep_range(4000, 5000);
- if (s5k6aa_gpio_deassert(s5k6aa, RST))
+ if (s5k6aa_gpio_deassert(s5k6aa, RSET))
msleep(20);
return ret;
@@ -851,7 +851,7 @@ static int __s5k6aa_power_off(struct s5k
{
int ret;
- if (s5k6aa_gpio_assert(s5k6aa, RST))
+ if (s5k6aa_gpio_assert(s5k6aa, RSET))
usleep_range(100, 150);
if (s5k6aa->s_power) {
@@ -1510,7 +1510,7 @@ static int s5k6aa_configure_gpios(struct
int ret;
s5k6aa->gpio[STBY].gpio = -EINVAL;
- s5k6aa->gpio[RST].gpio = -EINVAL;
+ s5k6aa->gpio[RSET].gpio = -EINVAL;
gpio = &pdata->gpio_stby;
if (gpio_is_valid(gpio->gpio)) {
@@ -1533,7 +1533,7 @@ static int s5k6aa_configure_gpios(struct
if (ret < 0)
return ret;
- s5k6aa->gpio[RST] = *gpio;
+ s5k6aa->gpio[RSET] = *gpio;
}
return 0;
The use of an enum named 'RST' conflicts with a #define macro named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h. The MIPS use of RST was there first (AFAICT), so change the media/i2c/ uses of RST to be named 'RSET'. 'git grep -w RSET' does not report any naming conflicts with the new name. This fixes multiple build errors: arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST' 356 | RST, | ^~~ ../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST' 180 | RST, | ^~~ ../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST' 238 | RST, | ^~~ and some others that I have trimmed. Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver") Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor") Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: linux-media@vger.kernel.org Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Sangwook Lee <sangwook.lee@linaro.org> --- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 6 +++--- drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +- drivers/media/i2c/s5k4ecgx.c | 10 +++++----- drivers/media/i2c/s5k5baf.c | 6 +++--- drivers/media/i2c/s5k6aa.c | 10 +++++----- 5 files changed, 17 insertions(+), 17 deletions(-)