| Message ID | 20210429121150.106804-1-robert.marko@sartura.hr |
|---|---|
| State | Accepted |
| Commit | ec081f9154766be98b7be6e4c4483b580c5b12e7 |
| Headers | show |
| Series | [1/2] hwmon: lm75: Add TI TMP1075 support | expand |
On Thu, Apr 29, 2021 at 02:11:49PM +0200, Robert Marko wrote: > TI TMP1075 is a LM75 compatible sensor, so lets > add support for it. > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> Applied to hwmon-next. Thanks, Guenter > --- > Documentation/hwmon/lm75.rst | 6 ++++-- > drivers/hwmon/lm75.c | 13 +++++++++++++ > 2 files changed, 17 insertions(+), 2 deletions(-) > > diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst > index 81257d5fc48f..8d0ab4ad5fb5 100644 > --- a/Documentation/hwmon/lm75.rst > +++ b/Documentation/hwmon/lm75.rst > @@ -93,9 +93,9 @@ Supported chips: > > https://www.st.com/resource/en/datasheet/stlm75.pdf > > - * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275 > + * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275, TMP1075 > > - Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275' > + Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275', 'tmp1075' > > Addresses scanned: none > > @@ -119,6 +119,8 @@ Supported chips: > > https://www.ti.com/product/tmp275 > > + https://www.ti.com/product/TMP1075 > + > * NXP LM75B, PCT2075 > > Prefix: 'lm75b', 'pct2075' > diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c > index e447febd121a..afdbb63237b9 100644 > --- a/drivers/hwmon/lm75.c > +++ b/drivers/hwmon/lm75.c > @@ -50,6 +50,7 @@ enum lm75_type { /* keep sorted in alphabetical order */ > tmp75, > tmp75b, > tmp75c, > + tmp1075, > }; > > /** > @@ -293,6 +294,13 @@ static const struct lm75_params device_params[] = { > .clr_mask = 1 << 5, /*not one-shot mode*/ > .default_resolution = 12, > .default_sample_time = MSEC_PER_SEC / 12, > + }, > + [tmp1075] = { /* not one-shot mode, 27.5 ms sample rate */ > + .clr_mask = 1 << 5 | 1 << 6 | 1 << 7, > + .default_resolution = 12, > + .default_sample_time = 28, > + .num_sample_times = 4, > + .sample_times = (unsigned int []){ 28, 55, 110, 220 }, > } > }; > > @@ -662,6 +670,7 @@ static const struct i2c_device_id lm75_ids[] = { > { "tmp75", tmp75, }, > { "tmp75b", tmp75b, }, > { "tmp75c", tmp75c, }, > + { "tmp1075", tmp1075, }, > { /* LIST END */ } > }; > MODULE_DEVICE_TABLE(i2c, lm75_ids); > @@ -771,6 +780,10 @@ static const struct of_device_id __maybe_unused lm75_of_match[] = { > .compatible = "ti,tmp75c", > .data = (void *)tmp75c > }, > + { > + .compatible = "ti,tmp1075", > + .data = (void *)tmp1075 > + }, > { }, > }; > MODULE_DEVICE_TABLE(of, lm75_of_match);
diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst index 81257d5fc48f..8d0ab4ad5fb5 100644 --- a/Documentation/hwmon/lm75.rst +++ b/Documentation/hwmon/lm75.rst @@ -93,9 +93,9 @@ Supported chips: https://www.st.com/resource/en/datasheet/stlm75.pdf - * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275 + * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275, TMP1075 - Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275' + Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275', 'tmp1075' Addresses scanned: none @@ -119,6 +119,8 @@ Supported chips: https://www.ti.com/product/tmp275 + https://www.ti.com/product/TMP1075 + * NXP LM75B, PCT2075 Prefix: 'lm75b', 'pct2075' diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index e447febd121a..afdbb63237b9 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -50,6 +50,7 @@ enum lm75_type { /* keep sorted in alphabetical order */ tmp75, tmp75b, tmp75c, + tmp1075, }; /** @@ -293,6 +294,13 @@ static const struct lm75_params device_params[] = { .clr_mask = 1 << 5, /*not one-shot mode*/ .default_resolution = 12, .default_sample_time = MSEC_PER_SEC / 12, + }, + [tmp1075] = { /* not one-shot mode, 27.5 ms sample rate */ + .clr_mask = 1 << 5 | 1 << 6 | 1 << 7, + .default_resolution = 12, + .default_sample_time = 28, + .num_sample_times = 4, + .sample_times = (unsigned int []){ 28, 55, 110, 220 }, } }; @@ -662,6 +670,7 @@ static const struct i2c_device_id lm75_ids[] = { { "tmp75", tmp75, }, { "tmp75b", tmp75b, }, { "tmp75c", tmp75c, }, + { "tmp1075", tmp1075, }, { /* LIST END */ } }; MODULE_DEVICE_TABLE(i2c, lm75_ids); @@ -771,6 +780,10 @@ static const struct of_device_id __maybe_unused lm75_of_match[] = { .compatible = "ti,tmp75c", .data = (void *)tmp75c }, + { + .compatible = "ti,tmp1075", + .data = (void *)tmp1075 + }, { }, }; MODULE_DEVICE_TABLE(of, lm75_of_match);
TI TMP1075 is a LM75 compatible sensor, so lets add support for it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- Documentation/hwmon/lm75.rst | 6 ++++-- drivers/hwmon/lm75.c | 13 +++++++++++++ 2 files changed, 17 insertions(+), 2 deletions(-)