| Message ID | 20210423142609.36712-1-imackinnon@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Bluetooth: btusb: Load Broadcom firmware for Dell Bluetooth device 413c:8197. | expand |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=472285 ---Test result--- ############################## Test: CheckPatch - PASS ############################## Test: CheckGitLint - FAIL Bluetooth: btusb: Load Broadcom firmware for Dell Bluetooth device 413c:8197. 1: T1 Title exceeds max length (77>72): "Bluetooth: btusb: Load Broadcom firmware for Dell Bluetooth device 413c:8197." 1: T3 Title has trailing punctuation (.): "Bluetooth: btusb: Load Broadcom firmware for Dell Bluetooth device 413c:8197." ############################## Test: CheckBuildK - PASS ############################## Test: CheckTestRunner: Setup - PASS ############################## Test: CheckTestRunner: l2cap-tester - PASS Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6 ############################## Test: CheckTestRunner: bnep-tester - PASS Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 ############################## Test: CheckTestRunner: mgmt-tester - PASS Total: 416, Passed: 402 (96.6%), Failed: 0, Not Run: 14 ############################## Test: CheckTestRunner: rfcomm-tester - PASS Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0 ############################## Test: CheckTestRunner: sco-tester - PASS Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0 ############################## Test: CheckTestRunner: smp-tester - PASS Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0 ############################## Test: CheckTestRunner: userchan-tester - PASS Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 --- Regards, Linux Bluetooth
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 5cbfbd948f6..2d24231f898 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -119,9 +119,6 @@ static const struct usb_device_id btusb_table[] = { /* Canyon CN-BTU1 with HID interfaces */ { USB_DEVICE(0x0c10, 0x0000) }, - /* Broadcom BCM20702A0 */ - { USB_DEVICE(0x413c, 0x8197) }, - /* Broadcom BCM20702B0 (Dynex/Insignia) */ { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
Remove the btusb_table entry for 413c:8197 so the device is handled by the later Dell vendor entry, which specifies patchram loading. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev= 1.12 S: Manufacturer=Dell Computer Corp S: Product=DW380 Bluetooth Module S: SerialNumber=74E54354F609 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Ian Mackinnon <imackinnon@gmail.com> --- drivers/bluetooth/btusb.c | 3 --- 1 file changed, 3 deletions(-)